2022 IC BUS CE-SCHOOL-BUSIc Bus Ce-school-bus 2022

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 2022 IC BUS CE-SCHOOL-BUS.

ManufacturerKnown WMI(s)Fuel Type
IC BUS
IC BUS VIN Decoder

Use the box here to look up VINs from IC BUS as well as other manufacturers

#
Frequently Asked Questions
  • Are there recalls for the 2022 IC BUS CE-SCHOOL-BUS?
     - There are 11 recall(s) for the 2022 IC BUS CE-SCHOOL-BUS, additional information is below.
NHTSA Mandated Recalls
  • Recall 233591 [USA]: An electrical short in the brake pressure switch can overheat the circuit and increase the risk of a fire while driving or parked.

  • Recall 232696 [USA]: An abs indicator light that fails to remain illuminated will not alert the driver of an abs malfunction, which could increase the risk of a crash.

  • Recall 244037 [USA]: A school bus roof panel with insufficient joint strength may separate during a crash, increasing the risk of injury.

  • Recall 210209 [USA]: A fractured steering gear can cause a loss of steering control, increasing the risk of a crash.

  • Recall 181710 [USA]: A loose or detached steering wheel increases the risk of a crash.

  • Recall 211940 [USA]: Unexpected engine shut down can increase the risk of a crash. additionally, a disabled school bus may require an evacuation procedure in an uncontrolled traffic situation, increasing the risk of injury to passengers.

  • Recall 188688 [USA]: A lack of emergency exits can delay passengers from exiting the vehicle during an emergency, increasing their risk of injury.

  • Recall 147143 [USA]: If the sign performance is inhibited, or completely inoperable, it can reduce the visibility for oncoming drivers, increasing the risk of a crash.

  • Recall 2021650 [Canada]: Engine

  • Recall 2022267 [Canada]: Steering

  • Recall 2022318 [Canada]: Steering

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • IK0400037 - SERVICE BRAKES, AIR: This document is to guide users to eliminate brake pedal rattle noise.
  • IK08000403 - ENGINE AND ENGINE COOLING: This document details the procedure that must be followed to ensure proper alternator troubleshooting.
  • IK0800482 - ELECTRICAL SYSTEM: This document covers battery diagnostics, maintenance and storage requirement.
  • IK0800351 - ELECTRICAL SYSTEM: J1939 data link source address information
  • IK2600069 - ENGINE AND ENGINE COOLING: How to request a horsepower quote; all international and cummins engines
  • IK2200109 - SEATS: Bus seat back foam inspection guidelines
  • IK1900291 - VISIBILITY: Webasto thermo pro 90 service and repair manual; only ce bus with feature code 0049jan or 0049jap
  • IK1201457 - ELECTRICAL SYSTEM: Cummins b6.7 grid heater relay
  • IK0400040 - BRAKES (PWS): General wheel speed sensor troubleshooting
  • IK0300010 - SUSPENSION: Diagnosis of chassis wander complaints.
  • IK2200154 - SEATS: Luggage rack upholstery repair; only busses equipped with luggage rack.
  • IK0800351 - ELECTRICAL SYSTEM: J1939 data link source address information
  • IKo800080 - ELECTRICAL SYSTEM: J1939 data link troubleshooting
  • 23901 - STRUCTURE: These certain buses may have roof water leaks resulting from incorrect assembly described in roof joint recalls 23501 and 23502.
  • IK1500105 - FUEL SYSTEM, DIESEL: Bus diesel fuel cap leaks; only models built 11/30/2020 through 05/18/2023
  • IK0700120 - ENGINE AND ENGINE COOLING: Qls emergency calibration revert process
  • IK2200153 - STRUCTURE:BODY:ROOF AND PILLARS: Bus roof leaks
  • IK2200152 - ENGINE AND ENGINE COOLING: Ce bus engine cover sealing
  • IK0700120 - ENGINE AND ENGINE COOLING: Qls emergency calibration revert process
  • 23103 - VISIBILITY: These certain buses may have a rear a/c system compressor mounting bracket with insufficient clearance between the compressor and bracket that could result in rear a/c compressor lock up.
  • 22502 - ENGINE AND ENGINE COOLING: Per agreement with epa and carb, cummins, inc. Provided an emergency calibration for cummins isb, b6.7, isl9, l9, and x15 engines when a def quality sensor (dqs) was not available. This action addressed the diesel exhaust fluid (def) qualit
  • IK1200101 - ENGINE AND ENGINE COOLING: Cummins programming guide and fault codes285 & 265; only vehicles built with cummins b6.7, x15, or l9 engines
  • IK0800554 - ENGINE AND ENGINE COOLING: Telematics installation guidelines - only units with 500k data link
  • IK0800407 - ENGINE AND ENGINE COOLING: Starter diagnostics and warranty claim procedure for all engines and all chassis excluding vehicles equipped with psi engines or cummins isb engine with allison transmissions
  • IK0900141 - ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS: Air compressor inlet hose chaffing / leaking
  • IK0700115 - ENGINE AND ENGINE COOLING: Qls emergency ecm calibration; only models equipped with cummins b6.7, x15, l9, or international a26 engines
  • IK0800351 - ELECTRICAL SYSTEM: J1939 data link source address information
  • IK0700115 - ENGINE AND ENGINE COOLING: Qls emergency calibration. Applies to 2016 and newer cummins b6.6, x15, and l9 engines and all a26 engines
  • 22519 - ENGINE AND ENGINE COOLING: In cold weather, especially during engine warmup, the engine may experience a misfire condition resulting in setting the malfunction indicator lamp (mil) and possible increase in emissions. Only models with generation ii psi 8.8l lp engines
  • 22514 - STEERING: The steering gears may have been assembled with less than the required input shaft ball bearings and can result in a fracture of the input shaft and loss of steering.
  • IK1201472 - ENGINE AND ENGINE COOLING: Pico scope ccos (crankcase separator test)
  • 22514 - STEERING: As reported by r. H. Sheppard co., inc in their defect report to nhtsa (recall 22e-047), an anomaly in the steering gear recirculating ball insertion operation occurred during assembly. Subsequent rework processes and inspections did not de
  • IK1201469 - ENGINE AND ENGINE COOLING: Picoscope test one channel rct
  • IK0800610 - ELECTRICAL SYSTEM: Picoscope test resistance and ohmmeter
  • IK0800609 - ELECTRICAL SYSTEM: Picoscope test for datalink (can) health shorts & opens
  • IK0800607 - ELECTRICAL SYSTEM: Picoscope test - battery loss of charge - parasitic draw test
  • 22509 - VEHICLE SPEED CONTROL: Certain 2022 and 2023 ce and re school buses built with feature code 0008txk or 0008txm (bendix wingman prewire option) may have been built without the warning label to notify the driver that the collision mitigation system is not operation
  • 22113 - ELECTRICAL SYSTEM: Certain electric ce buses may have been built without the proper high voltage identification labels
  • IK0900141 - SERVICE BRAKES, AIR: Bus, durastar, and mv air compressor inlet hose chaffing/leaking; equipped with cummins isb / b6.7 engines
  • 22512 - STEERING: The steering wheel retaining nut may not have been torqued properly during assembly and may allow the steering wheel to loosen, and possibly separate from the steering column shaft.
  • 22511 - STEERING: The steering wheel retaining nut may not have been torqued properly during assembly and may allow the steering wheel to loosen, and possibly separate from the steering column shaft.
  • IK2300007 - POWER TRAIN: Electric vehicle charging concerns; electric vehicles only
  • IK0800351 - EQUIPMENT: J1939 data link source address information
  • 22901 - SERVICE BRAKES, AIR: The rear axle brake chambers may be installed in the incorrect mounting slot which could lead to long term durability issues.
  • 21508 - ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM): With the vehicle in motion, the engine control module (ecm) may set a fault code resulting in engine shut down without warning. Only models equipped with certain psi engines
  • 21507 - ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM): With the vehicle in motion, the engine control module (ecm) may set a fault code resulting in engine shut down without warning. Only models equipped with certain psi engines
  • IK2600255 - EQUIPMENT ADAPTIVE/MOBILITY: Greenhouse gas phase 2 regulatory compliance implementation
  • IK2300005 - VISIBILITY: Electric vehicle electric heat operation
  • IK1000003 - STEERING: Power steering diagnostics flow / pressure specifications for power steering gears and power steering pumps
  • IK0800080 - ELECTRICAL SYSTEM: J1939 data link troubleshooting
  • IK0700115 - ENGINE AND ENGINE COOLING: Qls emergency calibration; models equipped with 2016 and newer cummins b6.7, x15 and l9 engines or international a26 engine.
  • 21508 Interim - ENGINE AND ENGINE COOLING: With the vehicle in motion, the engine control module (ecm) may set a fault code resulting in engine shut down without warning; only models equipped with psi gasoline or lpg engines.
  • 21507 Interim - ENGINE AND ENGINE COOLING: With the vehicle in motion, the engine control module (ecm) may set a fault code resulting in engine shut down without warning; only models built with psi gasoline or lpg engines
  • IK2600254 - ELECTRICAL SYSTEM: New or replacement body control module (bc,bcm) not detected; gen 4 bcm
  • IK2600251 - ENGINE AND ENGINE COOLING: How to obtain as built parameter list
  • IK2300003 - ELECTRICAL SYSTEM: Power washing an electric vehicle
  • IK0700115 - ENGINE AND ENGINE COOLING: Qls emergency calibration; models with 2016 cummins isx, a26 and epa 2017 and newer cummins x15, l9, or b6.7 engines
  • IK1201299 - EQUIPMENT ADAPTIVE/MOBILITY: Engine oil capacities. All international electronic engines 1994 to present and cummins isb, ism, or isx engines
  • IK0900141 - EQUIPMENT ADAPTIVE/MOBILITY: Durastar and mv air compressor inlet hose rub. Only models equipped with cummins isb or b6.7 engines
  • IK0700115 - EQUIPMENT ADAPTIVE/MOBILITY: Qls emergency calibration. Only models with epa 2017 and newer cummins x15, l9, or b6.7 engines
  • 21506 - STRUCTURE: Certain school buses may not conform to federal motor vehicle safety standard (fmvss) 217 a?? The exit opening configuration may not meet the minimum exit opening criteria.
  • 21111 - ENGINE AND ENGINE COOLING: Certain ce series buses may have been programmed with the incorrect parameter setting that may impact regeneration switch functionality.
  • IK2300002 - ELECTRICAL SYSTEM: Faults setting due to fast key cycle; electric bus only
  • IK0400040 - SERVICE BRAKES, AIR: General wheel speed sensor troubleshooting
  • IK0700112 - ENGINE AND ENGINE COOLING: Aftertreatment clamp corrosion; single can aftertreatment systems
  • IK1201459 - ENGINE AND ENGINE COOLING: Cummins engine vibration with aftermarket air conditioning installed
  • IK1201457 - ENGINE AND ENGINE COOLING: Cummins b6.7 grid heater relay
  • IK2501419 - ELECTRICAL SYSTEM: Ce bus radio pa not switching to external / internal speakers; only models with feature codes 49clm or 49cln
  • IK1900263 - ENGINE AND ENGINE COOLING: Bus with cummins b6.7 engine and dual a/c - cylinder head failures

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.