International 4700-low-profile 1992

• Recall 1997109 [Canada]: Brakes
  The cam lever on the powered apply brake can move forward because of a hole in the transmission mounting boss was drilled too deep, allowing the cam lever to become disengaged from the parking brake shoes. Should this occur, the driver would have no warning that the parking brake was not applied. This could result in vehicle roll away and a possible accident. Correction: shims will be installed in the drilled area of the automatic transmission park brake pivot pin hole.

  Show Content

• Recall 1993084 [Canada]: Suspension
  The pressure reief valve was omitted on the air suspension reservoir air tank. Should the air compressor governor fail, it could cause excessive air pressure build-up and could possibly cause the air tank to rupture and result in personal injury. Correction: a pressure relief valve will be installed on the air suspension reservoir tank.

  Show Content

• Recall 1991139 [Canada]: Powertrain
  On vehicles equipped with certain allison transmissions, the engine could be started with the transmission selector in the drive or reverse position. If the engine is started with the transmission in range without the service or parking brake applied, the vehicle could roll forward or backward as soon as the engine starts. This could result in a crash without prior warning. Correction: neutral start switch will be inspected and replaced if necessary.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.