International 4700-low-profile 1997

• Recall 2003049 [Canada]: Seats and restraints
  On certain vehicles built with bostrum driver seat models (910, 910c, or 914) and with international's parking brake code 04036. If someone outside the cab adjusts/slides the driver's seat to its most forward position, with the parking brake set, the seat will contact and release the parking brake lever. This could cause the vehicle to move unexpectedly and possibly result in an accident. Correction: a stop-bracket will be installed on the seat track to limit the travel of the seat so that it can not release the parking brake lever when the seat is adjusted to its most forward position. This is an expansion of recall 01-088.

  Show Content

• Recall 2002113 [Canada]: Brakes
  On certain trucks the fitting that connects the double check valve to the rear axle air brake relay valve may break. If the fitting breaks the rear service brakes will cease to operate, resulting in an extended stopping distance, possibly resulting in a collision.

  Show Content

• Recall 1999025 [Canada]: Steering
  On certain vehicles, the tie rod end can pull outboard and separate from the tie rod tube due to improper thread engagement between the male tie rod end and the female tube. A separation of the tie rod end could result in loss of steering control and a possible crash. Correction: the complete tie rod assembly will be replaced on involved vehicles.

  Show Content

• Recall 1998117 [Canada]: Powertrain
  The double neutral shift control lever may bind as the driver attempts to put the lever in the park position. If this occurs the lever does not actually reach the full park position which could result in a false park condition. This could result in the vehicle rolling if parked on an incline. Correction: the double shift control will be replaced with a redesigned shift control and a final adjustment will be made to the cable after the new shift control is installed.

  Show Content

• Recall 1998224 [Canada]: Fuel supply
  On certain vehicels, a fuel leak could occur during normal operation because of over crimping of the hose end fittings on the hose from the regulator to the left head and the hose from the fuel transfer pump to the regulator. Should a fuel leak occur on a hot engine, a fire could result. Correction: fuel hoses will be replaced with properly crimped hoses.

  Show Content

• Recall 1997021 [Canada]: Suspension
  The rear axle pinion may crack and eventually break at the pinion thread location. This could cause separation of the threaded end of the pinion resulting in subsequent separation of the yoke and drive line from the rear axle. A separated yoke and drive line could pose a hazard to other users of the roadway and also affect vehicle stability and control. This could result in a crash without prior warning. Correction: rear axle carrier pinion assembly will be replaced on affected vehicles.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.