International 8100 2001

• Recall 2001124 [Canada]: Brakes
  On certain vehicles, the automatic slack adjuster anchor brackets can fail due to fatigue fracture and completely separate, causing the slack adjusters to function as manual slack adjusters. If the support bracket for an automatic slack adjuster fails, the brakes at that wheel end will not automatically adjust. As the brake linings wear, the vehicle will have reduced braking capacity, increasing the risk of a crash. Correction: dealers will install a new bracket on each suspect slack adjuster.

  Show Content

• Recall 2001153 [Canada]: Steering
  Certain heavy duty vehicles equipped with a 20,000 pound rated dana i-200 front steer axles. There are visible cracks in the seal diameter and large bearing diameter on the front axle knuckles, which can reduce the life expectancy of the knuckles. If one of the suspect steering knuckles fails, the wheel at that wheel end would completely separate from the vehicle without warning and the driver would experience a sudden loss of steering control, increasing the risk of a crash. Correction: dealers will replace the two front steering knuckles.

  Show Content

• Recall 2004049 [Canada]: Other
  On certain vehicles, a defect in the front wheel hub bearings will result in premature spalling which will lead to eventual breakdown of the bearing. An early breakdown of the wheel hub bearing system, when undetected, can possibly cause a wheel fire, wheel separation, loss of vehicle control, or vehicle fire. Correction: dealer will inspect the front axle hubs, and replace if necessary. This is an expansion of recall 03-134.

  Show Content

• Recall 2003134 [Canada]: Other
  On certain vehicles, a defect in the front wheel hub bearings will result in premature spalling which will lead to eventual breakdown of the bearing. An early breakdown of the wheel hub bearing system, when undetected, can possibly cause a wheel fire, wheel separation, loss of vehicle control, or vehicle fire. Correction: dealer will replace front axle hubs.

  Show Content

• Recall 2004049 [Canada]: Other
  On certain vehicles, a defect in the front wheel hub bearings will result in premature spalling which will lead to eventual breakdown of the bearing. An early breakdown of the wheel hub bearing system, when undetected, can possibly cause a wheel fire, wheel separation, loss of vehicle control, or vehicle fire. Correction: dealer will inspect the front axle hubs, and replace if necessary. This is an expansion of recall 03-134.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.