2008 ISUZU F-SERIESIsuzu F-series 2008

Vehicle Details: Service Bulletins

Below you will find all available information on the 2008 ISUZU F-SERIES.

ManufacturerKnown WMI(s)Fuel Type
ISUZU
ISUZU VIN Decoder

Use the box here to look up VINs from ISUZU as well as other manufacturers

#
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • No comms 2024-03 - UNKNOWN OR OTHER: There are no manufacturer communications in accordance with 49 cfr 579.5 to report for march 2024 for isuzu motors limited.
  • WB11-X-001A - ENGINE AND ENGINE COOLING: The following information is provided to clearly explain isuzua??S policy for control module (engine, transmission, antilock brake, instrument panel, body control, power interface, etc.) reprogramming. Control module calibrations are regula
  • IB13-R-001G - UNKNOWN OR OTHER: This bulletin outlines the procedures for using the alpine exchange program (the "exchange program"). The exchange program must be used when any alpine radio or other component covered by this bulletin is repaired under warranty and may als
  • WB13-X-001B - EQUIPMENT: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
  • WB13-X-001A - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL: Isuzu commercial truck of america, inc. (icta) is providing the following procedural recommendations to improve dealer efficiency when submitting parts warranty claims. We strongly recommend dealers follow these procedures in order to avoi
  • IB09-X-004C - ENGINE AND ENGINE COOLING: The isuzu commercial truck of america (icta) service technical assistance center (tac) provides diagnostic support to isuzu dealer technicians repairing isuzu vehicles in and out of vehicle warranty. A tac case number will be issued solely
  • IB09-X-002B - EQUIPMENT: The following is a list of the isuzu-recommended threebond product part numbers identified in the various isuzu workshop manuals and bulletins. If a threebond product is unavailable, we recommend that you utilize the chart below to find eq
  • IB10X001F - FUEL SYSTEM, DIESEL: Diesel particulate filter.
  • 16NA383 - ENGINE (PWS): This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, crank no start, extended crank or misfire, mil with dtcs, and explains how top tier fuels shou
  • IB12-J-003E - FUEL SYSTEM, GASOLINE: Proper installation of the fuel injector pipes into a long block assembly the fuel injection pipes should be installed onto the new long block assembly after first installing the common rail. When installing the fuel injection pipes, foll
  • PIP5540B - ENGINE AND ENGINE COOLING: This preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component
  • PIP4925B - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL: This preliminary information document communicates a tip on the way to diagnose possible induction or exhaust air leaks using the evaporative emission cart smoke machine and ultrasonic leak detector tools.
  • PIP5540D - ENGINE AND ENGINE COOLING: This preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related component
  • PIP5628 - ENGINE AND ENGINE COOLING: This preliminary information communicates information that will need to be provided to tac to aid in diagnosing if a vehicle comes in with misfire and dtc codes P0300 - P0308 and/or P050D
  • IB10X001E - FUEL SYSTEM, OTHER:FUEL FILTER: This bulletin is being issued to inform dealers of diesel particulate filter (dpf) cleaning recommendations, inspection practices, and recommended r&r procedures for service and cleaning system availability.
  • PIC5491K - ELECTRICAL SYSTEM: This preliminary information communication provides information to the technician about vehicles that have an onstar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehic
  • PIC5088E - EQUIPMENT: This preliminary information communication provides information to the technician about vehicles that may not receiving all channels on the xm band. Technician will need to use a scan tool and verify current digital radio receiver status un
  • PIC3100F - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: This preliminary information communication provides information to the technician about vehicle's odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand-held gps unit to test the odomete
  • PIT3099P - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This preliminary information communication provides information to the technician about installing general motors accessory pats. Technician can check service information for some accessories. Technician can also contact partect for assista
  • PIC5491G - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicles that have an onstar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehic
  • PIT5399 - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about connectivity concerns when connecting an apple device via usb cord. Technician should insure the customer is using an original equipment manufacturer ap
  • PIT5264C - EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM(GLOBAL POSITIONING SYSTEM): This preliminary information communication provides information to the technician about vehicles that are travelling from canada to the united states. While in the united states they are unable to receive turn-by-turn directions. Due to the
  • PIT3271G - WHEELS: This preliminary information communication provides information to the technician about changing the tire and wheel size on vehicles. General motors will only support a tire calibration for tires that have been sized, tested and designed fo
  • PIC3278F - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician the steps needed to diagnose and repair the vehicles that may have unwanted or phantom phone calls. Technician will need to determine what type of call the cu
  • PIC4310K - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicle that may have an onstar system that has progression tones when pressing the blue or red button. Technician will need to call general motors tech
  • PIT3173C - ENGINE AND ENGINE COOLING: This preliminary information communication provides information to the technician that fluid contamination may be directed to one of the following testing centers according to the type of fluid needing testing. Dealer should send the correc
  • PIC4310H - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicle that may have an onstar system that has progression tones when pressing the blue or red button. Technician will need to call general motors tech
  • PIP5163 - ENGINE AND ENGINE COOLING: This preliminary information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blo
  • PIC5932 - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about customers that may complain of various concerns when using bluetooth components. Technician should use the preliminary information to gather information
  • PIT5319A - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicles that the onstar led is staying on after the vehicle retained accessory power has turned off and/or their bluetooth phone stays connected after
  • PIT5319 - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicles that the onstar led is staying on after the vehicle retained accessory power has turned off and/or their bluetooth phone stays connected after
  • PIC5759A - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicles that have a message on the radio "maximum number of phones are currently paired to the vehicle". Dealer should advise the customer this is norm
  • PIP5163A - ENGINE AND ENGINE COOLING: This preliminary information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blo
  • PIC5953 - EQUIPMENT:ELECTRICAL: This preliminary information communication provides information to the technician about vehicles that may have an issue when using bluetooth voice recognition with an iphone. Technician should work with the customer to insure the phone cont
  • IB15-L-001A - FUEL SYSTEM, OTHER: An investigation of returned number 1 and 2 egt sensors to the warranty parts center has identified a common occurrence of sensors being replaced with no trouble found (ntf). In order to better service the customer and stop the unnecessa
  • IB-12-J-003-B - ENGINE (PWS): Isuzu: information concerning the installation of the fuel injector pipes into a long block assembly. 1999 - 2002 isuzu fsr/ftr/fvr, 1999 - 2009 chevrolet or gmc t6500/t7500/t8500, 2000 - 2004 chevrolet or gmc wt5500, 2000 - 2004 isuzu frr,
  • SB-12-J-005 - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: Isuzu (chevrolet/gmc): trucks with diesel engine would have idle vibration, trouble starting, engine not revving up, and a lack of power due to possible operation condition of suction control valve (scv)/fuel rail pressure (frp) regulator
  • SB-09-J-002-C - ENGINE AND ENGINE COOLING:ENGINE:DIESEL: Isuzu (gmc, chevrolet): diesel engines equipped with egr cooler was diagnose for leaks with an egr cooler tester consisting of pressure regulator. Models isuzu n series-2005-2015, gmc/chevrolet w series 2005-10, isuzu f series 2007-09
  • IB-10-X-002 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Isuzu truck: instrument panel cluster exchange procedure when replacement is necessary. Follow diagnostic and repair information found in the intstrument panel gauges and console sub section of service information. If diagnosis points to
  • SB-10-N-001 - ELECTRICAL SYSTEM: Isuzu: repeating egr dtc's P042E, P0403, P0404, P0409, egr valve connector terminal spread. Technician diagnosis for dtc codes usually results in replacement of the egr valve. Investigation of returned egr valves shows that there is no f
  • SB-IB09-J-002 - ENGINE AND ENGINE COOLING:ENGINE: Isuzu/gmc/chevrolet: turbocharger inspection. A common occurrence of turbocharges being replaced for internal oil leaks. Results show that there is no fault with the turbocharger. The perceived oil leak actually may be a normal character
  • SB-08-E-001A - STEERING:HYDRAULIC POWER ASSIST:POWER STEERING FLUID: Isuzu vehicles: the power steering fluid is foaming and leaking out of the power steerng reservoir. This condition mainly occurs when starting vehicle in cold weather -7%c(20%f) or colder. *pe

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.