Jeep Wagoneer 1997
Vehicle Details: Consumer Complaints, Service Bulletins
JEEP VIN Decoder
Use the box here to look up VINs from JEEP as well as other manufacturers
Frequently Asked Questions
-
Where is the 1997 JEEP WAGONEER produced?
- The 1997 JEEP WAGONEER is produced in AUBURN HILLS Mi, United States (usa).
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- 3100519 - STRUCTURE: Use of aftermarket parts this bulletin involves discussing fca us llc position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 3100319 - STRUCTURE: Use of salvage/recycled parts this bulletin involves discussing fca us llc position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 3100619 - EQUIPMENT: Repair parts used for structural repairs this bulletin involves discussing fca us llc position with regard to structural repair parts usage.
- R2118796A - ENGINE AND ENGINE COOLING: Valve body. These may cause over drive cycling.
- 08-049-20 - ELECTRICAL SYSTEM: Charging system, battery diagnostic tools and warranty this information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are nece
- 31-005-19 - STRUCTURE: Use of aftermarket parts this bulletin involves discussing fca us llc position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 31-003-19 - EQUIPMENT: Use of salvage/recycled parts this bulletin involves discussing fca us llc position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 31-006-19 - STRUCTURE: Repair parts used for structural repairs this bulletin involves discussing fca us llc position with regard to structural repair parts usage.
- 23-014-15 - EQUIPMENT: Child seat tether anchor installation this bulletin describes procedures to install child seat tether anchors based on customer request. Retrofits are subject to part availability. Vehicles in the following list that are marked **** for th
- 1801201 - EQUIPMENT: Subject regarding generic scan tool (gst), publication no. 81-170-00008 provided with this technical service bulletin to provide reference information when using generic scan tool on obdii vehicles. *tt
- 0800600REV - ELECTRICAL SYSTEM: Subject regarding wire splice repairs. *sb
- 2300800B - SEATS: Subject regarding child seat tether anchors. *tt
- 233599REVA - STRUCTURE:BODY: Subject on the child seat tether anchors. *mjs
- 230800 - SEATS: Subject regarding child seat tether anchors. *tt
- 080600 - ELECTRICAL SYSTEM:WIRING: This bulletin provides a revised wire splice procedure and related parts. *tt
- 233599 - SEATS: Information on child seat tether anchors. *tt
- 081698 - EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.: Information on installation of radio transmitting equipment. *ak
- 230397 - STRUCTURE:FRAME AND MEMBERS: Difficult to clean light colored "chalky" residue from plastic body components that are molded in black. *tw
Most Recent Consumer Complaints and Accidents
Crash | Fire | Towed | Injured | Deaths | Failure Date |
---|
Crash | No | N | 1 Injured | None |
Owner states after taking vehicle from car wash his cruise control took over, causing vehicle to go out of control, striking other vehicles, turning over and contuined to roll out of control until vehicle crashed into parked cars, ignition had to be turned off to stop wheels from spinning. *ak
Crash | No | N | 1 Injured | None |
While traveling 45 mph another vehicle pulled out, causing an accident. Driver's air bag did not deploy, causing injury to consumer.Please provide further informaton. *ak