Kenworth T600 2001

• Recall 35428 [USA]: This condition could cause a person to slip and/or fall and could lead to personal injury.
  On certain heavy duty trucks equipped with vertical tail pipes, the frame access grabhandle is mounted too high.
  dealers will inspect the grabhandle location and if determined to be mounted too high, the handle will be relocated to the proper height. Owner notification began july 29, 2003. Owners should contact kenworth at 1-425-828-5440.
  kenworth recall no. 03kw5.Customers can also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 34139 [USA]: If left undetected or corrected it could lead to the separation of the fifth wheel top plate from its mounting structure, possibly resulting in a crash.
  On certain trucks equipped with jost international jsk 37u series fifth wheels, a fatigue crack can develop in the bracket pin weld under certain loading conditions.
  dealers will replace the bracket pins and repair instructions free of charge. Peterbilt's owner notification began june 20, 2003. Kenworth's owner notification began june 12, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 940-591-4201 or kenworth 425-828-5440.
  peterbilt recall no. 403-c/kenworth recall no. 03kw4.Also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 52361 [USA]: Seizure of the bearings can cause wheel separation or wheel end fire.
  On certain trucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.
  dealers will replace all front axle hubs. Notification began july 16, 2003. The manufacturer has advised us that parts will not be available until september 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy with a reasonable time should contact peterbilt at 940-591-4201 or kenworth 425-828-5440.
  kenworth recall no. 03kw2 and peterbilt recall no. 303-a.Customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 3296 [USA]: Under-tightened fasteners can lead to the driveline becoming detached from the vehicle resulting in property damage or personal injury.
  Vehicle description: heavy duty trucks. The driveline u-joint fasteners at the output yoke of the transmission were improperly tightened.
  dealers will tighten the driveline fasteners to the proper specification. Owner notification began november 26, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000.
  also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 2115 [USA]: This failure may inhibit the ability to direct air blowing from the hvac system to the windshield, potentially reducing the driver's visibility.
  Vehicle description: certain heavy duty trucks fail to comply with the requirements of fmvss no. 103, "windshield defrosting and defogging systems." the mode door in an hvac system can become inoperable. The mode door cam and actuator could bind, causing the cam retaining tabs to shear off.
  dealers will inspect the mode door operation and replace the hvac cab mode housing assembly if necessary. Owner notification began november 7, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000.
  also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 5271 [USA]: Failure of the lower sway arm attaching bolts could result in loss of vehicle control.
  Vehicle description: vehicles equipped with 54" rear axle spacing configuration of the airglide 200 suspension with the service application identified as logger, dump truck, or tanker. The rear suspension is regularly subjected to extreme articulation, resulting in flexing of the joint.
  dealers will replace the lower sway arm brackets. Owner notification began march 27, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000.
  also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 6757 [USA]: If a wiring short occurred anywhere along the cab power circuit, the available battery power could arc and cause subsequent damage to the vehicle or a fire.
  Vehicle description: heavy duty trucks equipped with an optional firewall-mounted circuit breaker. The main cab power and battery power leads were attached incorrectly. This condition can result in the main cab power being unprotected.
  dealers will inspect and correct the problem, as needed. Owner notification began february 26, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000.
  also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 2003121 [Canada]: Other
  On certain vehicles, fatigue cracks can initiate in the weld joining the bracket pin to its mounting flange on the fifth wheel assembly. Weld failures could lead to the loss of the pin and the potential separation of the fifth wheel top plate from its mounting structure without warning. Correction: dealers will replace the bracket pins.

  Show Content

• Recall 2001030 [Canada]: Electrical
  On certain vehicles, the main cab power and battery leads were attached incorrectly to the same side of the 135a circuit breaker when this circuit breaker was mounted in the optional firewall location rather than in the standard battery box location. This condition resulted on the main cab power circuit being unprotected. If a wiring short occurred anywhere along the cab power circuit, the available battery power could arc and cause a possible fire. Correction: vehicles will be inspected and wiring corrected as required.

  Show Content

• Recall 2001104 [Canada]: Suspension
  On certain vehicles, the rear suspension is regularly subjected to extreme articulation, resulting in flexing of the joint. Failure of the lower sway arm attaching bolts could result with possible loss of vehicle control. Correction: dealers will replace the lower sway arm brackets.

  Show Content

• Recall 2001217 [Canada]: Steering
  Certain heavy duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness. This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle. Correcton: dealers will remove and replace all affected tie rods and drag links with different designed ends.

  Show Content

• Recall 2001239 [Canada]: Other
  Certain heavy duty trucks built between march 5, 2001 and june 4, 2001. Fail to comply with the requirements of c.M. V. S.S. 103, "windshield defrosting and defogging systems." the mode door in a hvac system can become inoperable. The mode door cam and actuator could bind, causing the cam retaining tabs to shear off. This failure may inhibit the ability to direct air blowing from the hvac system to the windshield, potentially reducing the driver's visibility. Correction: dealers will inspect the mode door operation and replace the hvac cab mode housing assembly if necessary.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.