Kia Sephia 2002
Vehicle Details: Consumer Complaints, Service Bulletins
Use the box here to look up VINs from KIA as well as other manufacturers
-
Where is the 2002 KIA SEPHIA produced?
- The 2002 KIA SEPHIA is produced in Seoul Seocho-gu, South Korea.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- TSB_BOD055_R1 - STRUCTURE: Technical service bulletin: information for headlamp condensation and moisture - this bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This b
- TSBTRA046 - POWER TRAIN: Tsb: automatic transmission fluid application guide - this bulletin provides information relating to the correct automatic transmission fluids that are required for each kia model. Refer to the shop manual on kgis for the specific kia model
- KT-2008082201 - EXTERIOR LIGHTING:BRAKE LIGHTS: Kia: all models. Article provides information relating to the improved durability of bulb life for rear combination bulb; rear stop lamp/tail lamp bulb utilized on multiple kia models. *pe
 |
[pdf]
User Manual Guide Diagram
3337732 R D001 documents 4rgos it v1 static tiltTM child restraint check my fit in your car car seat-to-vehicle fit guide Fahrzeugkompatibilittsliste Liste des vhicules compatibles 3 1 1 A I R BAG 2 34 567 2 34 567 GB Vehicle Fitting Information This child restraint is approved to UN ECE regulation 44, 04 series of amendments. It is s... lang:de score:14 filesize: 268.53 K page_count: 32 document date: 2018-08-30 |
| Crash | Fire | Towed | Injured | Deaths | Failure Date |
|---|
| Crash | No | N | None | None | 20041213 |
When the consumer was hit at 5 mph on the front passenger side driver's side seat belt unlocked. Dealership was notified, but did not resolve the problem. *ak
| No | No | N | None | None | 20041019 |
While shifting gears, the vehicle hesitated. The consumer applied the accelerator pedal and the vehicle suddenly accelerated at a high speed. The consumer applied the brakes, but the pedal went to the floor. The vehicle continued to accelerate with excessive speed. The driver turned off the vehicle and restarted it. The consumer was able to drive it to the dealer for inspection. The mechanic informed the driver that the transmission solenoid switch needed to be replaced. Please fill in additional information. *jb
| Crash | No | N | 1 Injured | None | 20040401 |
During a 35 mph frontal collision front air bags did not deploy. Dealership was notified, but did not resolve the problem. *ak
| No | No | N | None | None | 20040123 |
While driving vehicle stalled. Driver was able to restart vehicle, and drive it to the dealer for inspection. Mechanic could not duplicate the problem. *ak *mr
| No | No | N | None | None | 20030123 |
The vehicle experienced extended stopping distance.*jb
| No | No | N | None | None | 20011007 |
Vehicle orginally started with a very hard pull to the right & vibration at highway speeds. When taken to dealership for repairs, told that service techs would not allow me to have back until repairs made because vehicle was dangerous to drive. After crossmember realign, still had a hard pull & vibration. Returned to dealership. Front tires replaced. Still has hard pull & vibration but now at lower speeds. Manufactor contacted all times but unable to remedy problem at this point. Vehicle dangerous at any speed above 40mph since vehicle will vear hard to the right especially upon acceleration.