Mazda B-series 1991

• Recall 83020 [USA]: Decreased lighting visibility may result in a vehicle crash.
  Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.
  sabersport will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on may 11, 2009. Owners may contact sabersport at 1-909-598-7589.
  this recall only pertains to aftermarket replacement equipment and has no relation to any original equipment installed on vehicles produced by the vehicle manufacturer.In order to determine if your aftermarket lamp assembly is affected by this noncompliance, please review the list of model numbers provided to us by sabersport.The list can be found under "document search" located at the bottom of your screen.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 51065 [USA]: Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
  Certain ck motorsports combination headlights, clear corner, bumper, and side marker lights sold as replacement lamps for use on the passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
  ck motorsport will notify owners and replace the noncompliant lamps free of charge. The recall began on july 1, 2006. Owners may contact ck motorsport at 1-909-610-7211.
  this recall only pertains to aftermarket replacement equipment and has no relation to any original equipment installed on vehicles manufactured by the vehicle manufacturers.For more information on the lamp model numbers, click on document search and view document titled "lamp model numbers."customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 20666 [USA]: The wheel cracks lead to a chronic loss of air in thetires which may damage the tires and cause them to fail. also, continuedoperation of the vehicle with this condition can result in the partialseparation of the wheel rim and disk. in either case, loss of vehicle controlmay occur, resulting in an accident.
  The steel spoked wheel assemblies installed as standard equipment or offered as an option on these vehicles were improperly welded during assembly of the wheel rim to disk, which can cause cracks in the wheel.
  mazda dealers will replace all four wheels without charge.
  system: wheels.Vehicle description: pickup trucks.

  Show Content

• Recall R/2016/210 [UK]: Fire may occur
  Carbonised grease may accumulate between the contact points in the ignition switch reducing the insulation performance inside the switch. In this condition the switch may generate heat resulting in smoke and in the worst case a fire.
  on affected vehicles replace the ignition switch.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Separation of master cylinder investigation # EA95018

  Ford continues to sudy the problem attempting to determine why stud fractures are not frequently occurring in other parts of the country.Likewise, odi continues gathering information to ascertain whether the recall scope should include other geographical areas.If evidence indicates the scope should be expanded, odi will reopen the investigation as warranted.
  

  Show Content

• Wheel cracking investigation # PE92068

  There is no summary currently available
  

  Show Content

Tl* the contact owns a 1991 mazda b-series truck. The contact stated that exhaust fumes entered the cabin of the vehicle. The vehicle was salvaged and the contact was informed that the failure was due to an incorrectly installed intake manifold. The vehicle was not repaired and the manufacturer was not notified. The approximate failure mileage was 196,700.

1991 mazda b-2600i stalled while driving. *ts when the vehicle stalled it was rear ended by another vehicle. The vehicle was then pushed off the left side of the road into a ditch. The truck sustained damage to the rear bumper, tailgate and truck bed. *nm

The main computer was burning up computer without any assignable cause. The vehicle will cut off while running. This very dangerous. I started noticing the problem 6 years ago, i thought the engine was not completely warm up thats why it was kind of stalling while running. Need to investigate this issue, because there are still plenty of mazda B2200 out there everyday. My brother in law have the same experience as mind. And some mazda mechanic admitted that this is very common for some mazda B2200 pick up truck, but unfortunately this issue was unreported.

The engine control module malfunctioned, causing the vehicle to completely shut down. Consumers investigation has revealed the cause of the failure to be the leakage of one or both of the filter capacitors on the circuit board (ecm). These capacitors, manufactured by rubycon, have a design (or warranted) life of 2000 hours. *ak

The seat belt retractor does not operate properly. When opening the door and closing the door, part of the seat belt is hanging outside of the truck. Also when getting into the truck and putting the seat belt on, it has a lot of slack in the belt. *ak

Driver's seat broke into two in a 10 mph rear end collision, resulting in injuries. *ak

Left front seat broke into two in a 10 mph rearend collision. *ak

Vehicle at speed 35mph, steering column fire, wiring caught on fire, electrical short. *ak

Master cylinder leaks air when pressure is applied to brake pedal. *aw

Common OBD-II Error Codes

• B2200 [1] No Communication to TV Module (No Fitting of TV)