Mazda Mpv 1989

• Recall 110664 [USA]: If the ignition switch overheats there would be an increased risk of a fire.
  Mazda north american operations (mazda) is recalling certain model year 1989-1998 mpv, 1990-1995 323, 1990-1998 protege, 1992-1993 mx-3, 1993-1995 929, 1993-1997 mx-6, and 1993-1998 626 vehicles. In the affected vehicles, grease applied to the contact points inside the ignition switch may become conductive and overheat.
  mazda will notify owners, and dealers will replace the ignition switch, free of charge. The recall began on december 17, 2015. Owners may contact mazda customer experience center at 1-800-222-5500, option#6. Mazda's number for this recall is 8715j.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 18290 [USA]: The safety belts would not provide adequate protection to an occupant in a vehicle crash.
  The front safety belt buckle release buttons can break. These red plastic release buttons are marked "press." if a button breaks, pieces can fall into the buckle assembly causing the buckle to operate improperly.
  owners should promptly check the condition and operation of both front safety belt buckles and carefully inspect the red release button for any breaks or cracks. They should ensure that both buckles are operating properly by inserting each latch plate into its buckle, tugging on the belt to make sure the latch is securely locked, and then pressing the release button. The latch plate should pop out of the buckle when the button is pressed. If either release button shows a sign of breaking or cracking or if either buckle fails to operate properly, owners should promptly contact their authorized dealer to schedule an appointment to have the buckle replaced or repaired, free of charge. The manufacturer is developing a remedy designed to prevent failure of the buttons that are not currently broken.
  system: interior; seat belts; belt buckles.Vehicle description: passenger vehicles equipped with safety belts made by takata corporation.Note: if your vehicle is presented to an authorized dealer on an agreed uponservice date and the remedy is not provided free of charge within a reasonable time, please contact mazda at 1-800-222-5500. Also contact the national highway traffic safety administration's auto safety hotline at 1-800-424-9393.

  Show Content

• Recall 21991 [USA]: The unexpected braking power could result in rear brakelockup and the vehicle becoming difficult to control.
  When applying the foot (service) brake in the low vehicle speed condition, the braking power produced may be more than expected.
  replace brake shoe assembly with improved assembly.
  system: brakes.Vehicle description: multi-purpose vehicles.

  Show Content

• Recall 24907 [USA]: This could cause an inoperative brake power assist whichdescreases braking ability, and presents a potential for an accident.
  When the vehicle is exposed to temperatures below 5 degrees fahrenheit (-15 degrees c), the neutral detergent used as an assembly lubricant may stick to the check valve, preventing valve from functioning.
  replace vacuum hose assembly.
  system: brake vacuum hose.Vehicle description: multi-purpose vehicle.

  Show Content

• Recall 27530 [USA]: Vans would not comply with fmvss 210
  The center safety belt attachment hardware brackets for the third seat may not withstand the specified tensile load.
  replace safety belt assemblies with brackets.
  system: safety belts / fmvss 210vehicle description: seven passenger van.

  Show Content

• Recall R/2016/210 [UK]: Fire may occur
  Carbonised grease may accumulate between the contact points in the ignition switch reducing the insulation performance inside the switch. In this condition the switch may generate heat resulting in smoke and in the worst case a fire.
  on affected vehicles replace the ignition switch.

  Show Content

• Recall 2015489 [Canada]: Electrical
  On certain vehicles, a defect in the ignition switch could cause an electrical short to develop over time. This could result in smoke and/or fire, increasing the risk of injury and/or damage to property. Correction: dealers will replace the ignition switch.

  Show Content

• Recall 1995085 [Canada]: Seats and restraints
  The (takata) abs plastic front seat belt release buttons on these vehicles may break allowing plastic pieces to fall into the buckle assembly. If this should happen, a no latch, false latch or failure to unlatch condition could occur creating the risk of personal injury in the event of a crash or sudden stop. Correction: front seat belt buckles will be repaired or replaced as necessary.

  Show Content

• Recall 1991017 [Canada]: Brakes
  Contamination of the vacuum brake hose check valve by detergent used in manufacture, could cause the valve to stick at low ambient temperatures thereby preventing its operation. Residual vacuum in the power brake system would provide power assist to the brakes on initial application, but the sticking valve would prevent vacuum build-up to provide continued power assist. This could result in increased stopping distances and a possible vehicle crash. Correction: vacuum brake hose and check valve assembly will be replaced on affected vehicles.

  Show Content

• Recall 1991143 [Canada]: Brakes
  Over a period of time the rear brakes on these vehicles may become more aggressive on brake application at low speed. This could result in rear wheel lock up and possible loss of vehicle control. Correction: brake shoe assemblies will be replaced with improved parts. Note: only vehicles without abs affected.

  Show Content

• Recall 1989158 [Canada]: Seats and restraints
  These vehicles do not comply with c.M.V.S.S 209 - seat belt assemblies. The centre seat belt attachment hardware brackets for the third seat may not withstand the required tensile load of 6000 lbs or 26.7 kn. Correction: centre seat belt assembly with bracket will be replaced on affected vehicles.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Takata seat belt buckle failure investigation # EA95005

  There is no summary currently available
  

  Show Content

• Throttle sticking investigation # PE91088

  There is no summary currently available
  

  Show Content

Consumer states that while driving at any speed and no warning the fuel tank had crack causing fluid to leak out and consumer can strongly smell gas fumes inside the vehicle dealer notified. Nlm

Consumer was driving on wet roads and on a turn vehicle slid and filpped over and ran into a tree. But, seat belts did not hold in place. Has not contacted dealership.*ak

Dealerships have provided no satisfactory resolution. No safety defect (s) listed in summary.

Transmission failed, causing slippage.

Engine cylinder head failed for no apparent reason. *ak

Fuel injector sticks, causing vehicle to stall.

While driving, experiences excessive wear to pads and warping of rotors, causing pedal pulsation when make attempt to slow/stop.*ak

Recall 95v103005 regarding seat elt buckles, consumer stated that he set an appointment with dealer one year ago and as of yet they haven't received the parts to fix vehicle. *ak

Cylinder head cracked. *dsh