Mercedes Benz 208 2003
Vehicle Details: Consumer Complaints, Service Bulletins
Below you will find all available information on the 2003 MERCEDES BENZ 208.
| Manufacturer | Known WMI(s) | Fuel Type |
|---|---|---|
| MERCEDES BENZ |
Use the box here to look up VINs from MERCEDES BENZ as well as other manufacturers
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- LI91.40-P-059238 - SEAT BELTS: Xentry(mercedes) : complaint of seat belt inoperative and causing noises, which is due to undervoltage at engine start. *lj
- LI54.71-P-060282 - ELECTRICAL SYSTEM:SOFTWARE: Xentry(mercedes) complaint blind spot inoperative. Cause comes from moisture & disruptions on the engine compartment. *lj
- LI54.65-P-058105 - ELECTRICAL SYSTEM:SOFTWARE: Xentry(mercedes)complaint regarding fault message , parktronic switches to malfunction. The cause for these malfunctions are fault in communication / warning element and control unit. *lj
- LI54.65-P-059114 - ELECTRICAL SYSTEM:SOFTWARE: Xentry(mercedes): complaint regarding 360 night camera appearing dark. Cause of this problem is the image software. Symptoms are: comm/info/, warning control system, parking assist. *lj
- LI47.30-P-060249 - ENGINE (PWS): Xentry( mercedes): complaint regarding check engine light on for dtc P04F000, purge line damaged during engine assembly. *lj
- LI32.00-P-060259 - ELECTRICAL SYSTEM:SOFTWARE: Xentry(mercedes): complaint fault entry in airmatic or abc control unit. *lj updated 05/06/14. *lj
- LI07.08-N-056829 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Xentry(mercedes) : complaint regarding engine diagnosis indicator lamp lights up with multiple fault codes. *lj
- LI46.35-P-060415 - ELECTRICAL SYSTEM:SOFTWARE: Xentry (mercedes) : power steering message" showing on instrument cluster when engine startup. The control unit may signal the malfunction. *lj updated 5/4/15. Updated 08/05/15*lj
- LI30.30-P-059421 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Xentry: mercedes; "pre-safe functions restricted" message may appear in the instrument panel. *lj update 05/06/2015*lj
- LI54.18-P-059464 - EQUIPMENT:ELECTRICAL: Xentry: mercedes benz: hill-start, esp, pre-safe, hold function, bas-trailer stabilization are unavailable which may be caused by a malfunction. *lj
- LI26.00-P-059641 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Xentry: mercedes benz: a message shown on the instrument panel "without changing gear, visit workshop". A change in the ignition can reset the message. *lj
- LI91.40-P-059554 - SEAT BELTS: Xentry: mercedes seat belts are not rolling up correctly (left&right) *lj
- LI54.70-P-058571 - ELECTRICAL SYSTEM:SOFTWARE: Random warnings for no obvious reason, mainly blind spot. 06/10/14*lj
- L130.30-P-055823 - ELECTRICAL SYSTEM:SOFTWARE: Collision assit warning without cause. 06/09/14*lj
| Crash | Fire | Towed | Injured | Deaths | Failure Date |
|---|
| No | No | N | None | None | 20160121 |
Sbc stop working call mbusa and they say the fixed that and the warranty is out wich this just now happened i didn't happened before 10 years now we have to pay on our own
| No | No | N | None | None | 20061103 |
I own a pt cruiser 2003 and i noticed about 7 months ago that the dashboard had a very big crack going straight through the middle. I am the only person that drove the car so i knew i didn't do it. I thought this was part of wear and tear. However, the car was only 4 years old. Then, i thought maybe it was the sun. I was reading our local newspaper and realized that i was not the only one who had this problem. The dashboard going to pieces and i am very disappointed that chrysler will not take responsibility for this imperfection on their part. I would like for this problem to be fixed. I am currently financing the car and could not afford to purchase another dashboard, the warranty expired. I would like t for chrysler to take responsibility for this. *ak
| No | No | N | None | None | 20060807 |
The rear tail lights on my 2003 mercedes benz slk continually go out. The lights are not burning out, but it appears the connections on the lights get to hot and burn up. *nm
Common OBD-II Error Codes
- P04F0 [1] P04F0