2007 MERCEDES-BENZ CLSMercedes-benz Cls 2007

Complaint Information: Service Bulletins, OBD II Codes

NHTSA Mandated Recalls
  • Recall R/2017/124 [UK]: Faulty control unit may cause vehicle to perform outside specification
    Where a control unit coding was updated in a workshop between 3 december 2016 and 5 december 2016 the coding may not correspond to the specification and may trigger unplanned action in the vehicle. The safety and emissions systems may not react as design intent.
    recall the vehicles that are likely to be affected and update the software in the corresponding control units.

  • Recall R/2008/149 [UK]: Engine could lose power.
    The electrical connection in the interior of the crankshaft sensor's chip housing may be interrupted which may result in loss of power and the inability to restart engine
    recall affected vehicles and replace crankshaft sensor

  • Recall R/2019/458 [UK]: The bonding between the glass panel and the sliding roof frame may not meet specifications
    The bonding between the glass panel and the sliding roof frame might not meet specifications
    check the glass panel bonding on the affected vehicles and replace the sliding roof if necessary

  • Recall 2021478 [Canada]: Structure
    Issue: this recall is for certain vehicles inspected under mercedes-benz recall 7891003 (transport canada recall 2019-668) that require a second inspection. On certain vehicles, the sunroof glass may not be properly attached to the sliding roof frame. Over time, the glass can become loose and could separate from the vehicle. Note: this recall affects 2006 and 2007 models originally equipped with a sunroof. Additionally, some 2001-2011 models may have had an affected sunroof installed during a repair. Safety risk: a sunroof that detaches from the vehicle could create a road hazard for others and increase the risk of a crash. Corrective actions: mercedes-benz will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the bonding of the sunroof glass. Dealers will replace the sliding roof, if necessary.

  • Recall 2019668 [Canada]: Structure
    Issue: on certain vehicles, the sunroof glass may not be properly attached to the sliding roof frame. Over time, the glass can become loose and could separate from the vehicle. Note: this recall affects 2006 and 2007 models originally equipped with a sunroof. Additionally, some 2001-2011 models may have had an affected sunroof installed during a repair. Safety risk: a sunroof that detaches from the vehicle could create a road hazard for others and increase the risk of a crash. Corrective actions: mercedes-benz will notify owners by mail and instruct you to take your vehicle to a dealer to inspect the bonding of the sunroof glass. Dealers will replace the sliding roof, if necessary.

  • Recall 2008242 [Canada]: Other
    Certain vehicles may have been programmed with incorrect software calibration data during the manufacturing process. This could affect various functions such as: the electric fuel pump may not receive a signal which, in case of a crash, may prevent the fuel pump from disconnecting as designed; the maximum speed limiter may not be activated; the fuel gauge readings may be incorrect; a stuck fuel-level sensor may not be displayed in the instrument cluster; the speedometer may be out of tolerance which, as a result, may indicate inaccurate vehicle speed; the on-board diagnostic (obd) system may reduce the emission level applicable to the vehicle, causing the check engine light to illuminate incorrectly. Correction: dealers will reprogram the electronic control module.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • SB-32-25-82 - SUSPENSION:REAR:SHOCK ABSORBER: Mercedes-benz: shock absorber procedure. *rm
  • C1A-071101 - STEERING: Replace steering angle sensor. Erase any stored dtc codes as described in the procedure just prior to retail sale. *pe

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.