2011 MERCEDES BENZ GLMercedes Benz Gl 2011

Complaint Information: Recalls, Consumer Complaints, Service Bulletins, OBD II Codes

NHTSA Mandated Recalls
  • Recall 94712 [USA]: Diesel fuel may be deposited onto the highway and create the potential for a crash.
    Mercedes-benz usa (mbusa) is recalling certain model year 2011 vehicles including e-class (212 platform), manufactured from july 2010 through february 2011, r-class (251 platform), manufactured from april 2010 through april 2011, ml-class (w164 platform), manufactured from january 2010 through march 2011, gl-class (x164 platform), manufactured from march 2010 through march 2011, and model year 2012 s-class (221 platform) vehicles. The diesel fuel filter may leak from the area around the heating component.
    mbusa will contact owners, and dealers will inspect and replace the diesel fuel filter if necessary, free of charge. The safety recall began on november 30, 2011. Owners may contact mercedes-benz usa at 1-800-367-6372.
    owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  • Recall 79229 [USA]: Diesel fuel may be deposited on roads and making those roads slippery, increasing the potential for a crash.
    Mercedes benz is recalling certain model year 2011 m-class, model w164, gl-class, model x164, e-class, model w212, r-class, and model v251vehicles. The o-ring may not have been properly lubricated in all cases. Lack of lubrication can lead to leakage of the fuel filter.
    dealers will replace the fuel filters free of charge. The safety recall began on november 24, 2010. Owners may contact mercedes benz at 1-800-367-6372. This campaign has been superseded . Please see recall campaign 11v-496.
    owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  • Recall R/2018/206 [UK]: Oil foam may develop in the active curve system oil reservoir
    It has been determined that on model series ml/gle gl/gls (166) & gle coupe (292) with active curve system (acs) oil foam may develop in the systems oil reservoir under dynamic operating conditions and at an oil level below the minimum level and escape via the ventilation bores in the cap of the reservoir. Depending on the orientation of the two ventilation bores the escaping oil could spray onto hot component parts of the exhaust system. In this case risk of fire cannot be ruled out.
    on affected vehicles replace the oil dipstick of the reservoir for the active curve system.

  • Recall 2017145 [Canada]: Airbag
    On certain vehicles, an update provided between de 3rd and 5th of december 2016 to the vehicle control unit may have been incorrectly applied. This could affect the proper function of various safety systems such as airbag deployment sequence, seatbelts recognition status, speed limiter setting and others. These conditions could increase the risk of injury to the occupants in the event of a crash. Correction: dealers will update the affected control units.

  • Recall 2016158 [Canada]: Airbag
    On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: dealers will replace the front driver air bag module.

  • Recall 2011359 [Canada]: Fuel supply
    On certain vehicles equipped with a diesel engine, the fuel filter assembly may develop a leak from the fuel heater o-ring seal. Diesel fuel spilt on the roadway could endanger other road users by making the roadway unexpectedly slippery. This could ultimately result in a vehicle crash causing property damage and/or personal injury. Correction: dealers will inspect and, if necessary, replace the diesel fuel filter assembly.

  • Recall 2010375 [Canada]: Fuel supply
    On certain gl350, ml350 and r350 bluetec vehicles, the diesel fuel filter may have an o-ring that was not properly lubricated during assembly, which could lead to a diesel fuel leakage. As a result, diesel fuel may be deposited on the road and create a risk a crash. Correction: dealers will replace the fuel filter.

  • Recall 2022237 [Canada]: Brakes
    Issue: on certain vehicles, corrosion could cause the brake booster to fail. If this happens, there may be an increase in brake pedal effort and increase the distance needed to stop the vehicle. In rare cases of severe corrosion, the brake booster could separate completely and cause a loss of brakes. Safety risk: a loss of brakes can increase the risk of a crash. Corrective actions: mercedes-benz advises you to stop driving your vehicle immediately. The company will notify owners by mail and instruct you to contact a local mercedes-benz dealership to arrange for towing and an inspection. The dealer will remove the rubber brake booster sleeve and determine whether the vehicle is safe to drive or if it can't be driven and a parts replacement is necessary. Also, depending on the results of the inspection, you may need to return within two years for a re-inspection.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • SB-40-10-72 - WHEELS: Mercedes-benz: installation information of bolted wheel connections. All models. *rm
  • LI46-20-P - STEERING:GEAR BOX (OTHER THAN RACK AND PINION): Mercedes-benz: the steering is leaking in the area of input shaft, because of wear on a seal ring. Model 164/251. *rm updated 2/1/12. *pe
  • LI-05-20-P - ENGINE AND ENGINE COOLING:ENGINE: Mercedes-benz: the malfunction light is on with multiple possible trouble codes stored. There could be a problem with the camshaft and/or scoring of a piston. *rm
  • LI-27-60-P049270 - POWER TRAIN:AUTOMATIC TRANSMISSION: Mercedes-benz: the auto-transmission switches to limp home mode or has no power. There are multiple possible fault codes. A piston may be damaged. *rm
  • SB-20101100005 - ELECTRICAL SYSTEM:SOFTWARE: Mercedes-benz: software update for heater lines. *rm
  • LI-27-50 - POWER TRAIN:MANUAL TRANSMISSION: Mercedes-benz: the transmission switches to limp-home mode while driving. Gearshifts are no longer possible. This is caused by a fault with the rpm sensor. *rm updated 9/20/11. *pe updated 5/9/14. *pe
  • SB-32-25-82 - SUSPENSION:FRONT:SPRINGS:AIR SUSPENSION SYSTEM: Mercedes-benz: shock absorber procedure. *rm
Most Recent Consumer Complaints and Accidents
CrashFireTowedInjuredDeathsFailure
Date
NoNoN NoneNone20110822

My husband was going on his third deployment, he did not want me to have any car problem, so we spent almost 70k for a brand new 2011 mercedes gl blue tech. However, less than 30 days and 1460 miles, the steering wheel quit working during a turn, it almost killed me. I have contacted the dealer (valley motor mercedes, hunt valley , md )and the mercedes, they could not explain why this happened, they do not care about my safety and refused to replace the car. They did not care the fact i was scared to death to drive the car either, they charge such high price for a junk car, and refused to hold the responsibility. Shame on them, my husband put his life on the line to protect those kind people ! *tr

NoNoN NoneNone20110313

Tl*the contact owns a 2011 mercedes benz glk350. The contact stated that the cruise control switch and the turn signal were both located on the left side of the steering wheel. Whenever he activated the left of right turn signals, his hand would hit the cruise control causing it to engage instead of the turn signal which was a design flaw. The vehicle was taken back to the dealer who stated the vehicle was designed that way and could not be changed. The manufacturer was contacted and also stated that since the switch was designed on the same side of the steering wheel they could not be changed. The failure mileage was 4,000.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.