Mercedes-benz Glk-class 2012

• Recall R/2021/358 [UK]: Takata airbag might not deploy as specified
  Certain climatic conditions may cause a chemical change to the airbag propellants?Over time.?
  replace the driver and?Passenger airbags.?

  Show Content

• Recall R/2021/359 [UK]: Takata airbag might not deploy as specified
  Certain climatic conditions may cause a chemical change to the airbag propellants over time.
  replace the driver and passenger airbags.

  Show Content

• Recall R/2019/307 [UK]: Software update required to improve emissions
  Improve the vehicle emissions via software updates
  update the diesel engine control unit software and add a supplementary booklet for the operator's manual. Check and replace n0x sensor if necessary.

  Show Content

• Recall 2018741 [Canada]: Airbag
  On certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, could eventually degrade the propellant contained in the passenger frontal airbag. This could cause the airbag to deploy with more force than normal. As a result, if the vehicle were involved in a collision that warrants airbag deployment, fragments could be propelled toward vehicle occupants, and the airbag assembly could be damaged, preventing proper function. These issues could increase the risk of injury. Correction: dealers will replace the passenger frontal airbag module. Note: canadian climate results in the propellant degrading slowly. The recall is being conducted as a precaution to address future risk, and is expected to replace airbag inflators before their function would be affected.

  Show Content

• Recall 2018724 [Canada]: Steering
  On certain vehicles originally sold or currently registered in areas of heavy road salt usage during winter months (quebec, new brunswick, nova scotia, prince edward island, and newfoundland & labrador), the bolts that attach the electric power steering assist motor to the steering gear housing may corrode and break. This could cause a loss of power steering assist. The resulting increase in steering effort could create the risk of a crash causing injury and/or damage to property. Correction: dealers will replace the mounting bolts and apply a corrosion protection coating to the gear housing and bolts. If the bolts bolt cannot be removed, a replacement steering gear will be installed.

  Show Content

• Recall 2017490 [Canada]: Airbag
  On certain vehicles, electrostatic discharge, when combined with a broken clock spring and insufficient grounding of the steering components, could lead to an inadvertent deployment of the driver's frontal airbag. Unintended airbag deployment, in a non-warranted (non-impact) situation, could startle the driver, which could result in a crash causing injury and/or property damage. In some instances, inadvertent deployment could cause minor injuries to vehicle occupants. Correction: dealers will add sufficient grounding to the steering components. Note: a broken clock spring would result in a driver airbag warning message appearing in the instrument cluster, as well as a red airbag warning lamp illuminating.

  Show Content

• Recall 2016158 [Canada]: Airbag
  On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: dealers will replace the front driver air bag module.

  Show Content

• Recall 2012386 [Canada]: Lights and instruments
  Certain vehicles may not comply with canada motor vehicle safety standard 108 - lighting system and retroreflective devices. The front parking lamps may exceed the maximum candlepower output specified in the standard and corresponding technical standards document 108. Correction: a production change has been undertaken to remedy these technical non-compliance conditions. No corrective recall action is required as the technical non-compliance conditions are deemed to be non-safety related.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.