2008 MERCEDES BENZ RMercedes Benz R 2008

Complaint Information: Recalls, Service Bulletins, OBD II Codes

NHTSA Mandated Recalls
  • Recall 67269 [USA]: If a defective driving pin exists in a vehicle and the pin breaks during normal vehicle turning, the normally available hydraulic support function will no longer function and steering wheel operation will be limited.
    Mercedes-benz is recalling 577 my 2008 gl-class, m-class, and r-class vehicles. A defect may exist in the driving pin used to control the oil pressure of the power steering.
    mercedes-benz will replace the steering gears. The recall began on january 28, 2009. Owner may contact mercedes-benz at 1-800-367-6372.
    mercedes-benz recall no. 2008120011.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  • Recall 77355 [USA]: In the event of a vehicle crash, the electrical fuel pump may not receive a crash signal that is required for the fuel pump to disconnect and prevent future fuel delivery as designed.
    Mercedes-benz is recalling my 2006-2008 m-class, r-class, my 2005-2009 slk-class, my 2005-2008 c-class, my 2003-2004 and 2006-2008 clk-class, my 2003-2008 e-class, my 2004 and 2008 cl-class, my 2008 cls-class, my 2004 and 2007-2008 s-class, my 2003 g-class, and my 2003-2004, 2006 and 2009 sl-class vehicles. A software calibration number (scn) coding received on the affected vehicles during a recent workshop visit was incorrect. Depending on the model year and model affected, the results of an incorrect scn coding can affect a number of vehicle safety and emission functions including the following types of functions: (1) the fuel gauge readings may be incorrect; (2) a stuck fuel-level sensor may not be displayed in the instrument cluster; (3) the obd system may cause the check engine light to illuminate incorrectly; and, (4) the speedometer may be out of tolerance.
    dealers will recode the scn free of charge. The recall began on august 30, 2008. Owners may contact mercedes-benz at 1-800-367-6372.
    mercedes-benz recall no. 2008 070001.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  • Recall 75084 [USA]: When this happens, the vehicle may lose power rather than enter a limp-home mode. in addition, the vehicle cannot be restarted after failure of the electrical connection in the sensor, increasing the risk of a crash.
    On certain passenger vehicles equipped with diesel engines, the crankshaft sensor could fail due to separation of bond wires from the lead frame in the sensor. This results in an interruption in the electrical connection in the chip housing of the sensor.
    dealers will replace the crankshaft sensor. The recall began on february 4, 2008. Owners may contact mercedes-benz at 1-800-367-6372.
    mercedes recall no. 2008010005.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  • Recall R/2008/147 [UK]: Engine emergency shut off on board diagnosis or tank/speedo signal may be affected
    Possibility of transfer of incorrect control unit software which could affect engine shut off control in an emergency situation or the on board diagnosis system or tank/speedometer signal
    recall affected vehicles and replace sam control unit

  • Recall R/2021/277 [UK]: The driver's air bag may have a chemical change to its propellant over time
    The driver's airbag may have a chemical change to its propellant over time.
    replace the driver?S airbag.

  • Recall 2008448 [Canada]: Steering
    On certain vehicles, a driving pin located inside the power steering rack may have been manufactured incorrectly. Should the driving pin fail it would cause an unexpected loss of steering power assist, which may result in a vehicle crash. Correction: dealers will replace the power steering gear assembly.

  • Recall 2022237 [Canada]: Brakes
    Issue: on certain vehicles, corrosion could cause the brake booster to fail. If this happens, there may be an increase in brake pedal effort and increase the distance needed to stop the vehicle. In rare cases of severe corrosion, the brake booster could separate completely and cause a loss of brakes. Safety risk: a loss of brakes can increase the risk of a crash. Corrective actions: mercedes-benz advises you to stop driving your vehicle immediately. The company will notify owners by mail and instruct you to contact a local mercedes-benz dealership to arrange for towing and an inspection. The dealer will remove the rubber brake booster sleeve and determine whether the vehicle is safe to drive or if it can't be driven and a parts replacement is necessary. Also, depending on the results of the inspection, you may need to return within two years for a re-inspection.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • LI-05-20-P - ENGINE AND ENGINE COOLING:ENGINE: Mercedes-benz: the malfunction light is on with multiple possible trouble codes stored. There could be a problem with the camshaft and/or scoring of a piston. *rm
  • SB-32-25-82 - SUSPENSION:REAR:SPRINGS:AIR SUSPENSION SYSTEM: Mercedes-benz: shock absorber procedure. *rm
  • C1A-091101 - ELECTRICAL SYSTEM:SOFTWARE: Mercedes benz: reprogram mbrace (n123/4) dialed numbers to hughes. This action applies to new vehicle inventory only. *pe
  • SB-P-047231 - STEERING: Mercedes: uneven steering forces when steering from lock to lock. Increased steering forces in certain positions. Approximately every 90 degrees a pressure point can be felt which must be overcome by increased force on the steering wheel
  • TSB-42-10-109 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER: Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. Once the corrosion protection is damaged or removed the brake components an
  • SCB-2008100007 - ENGINE AND ENGINE COOLING:ENGINE: Mercedes: install exhaust bracket reinforcement at transmission. In extreme driving conditions this exhaust bracket may break at the transmission. *pe

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.