2011 MERCEDES BENZ RMercedes Benz R 2011

Complaint Information: Recalls, Service Bulletins, OBD II Codes

NHTSA Mandated Recalls
  • Recall 94710 [USA]: Diesel fuel may be deposited onto the highway and create the potential for a crash.
    Mercedes-benz usa (mbusa) is recalling certain model year 2011 vehicles including e-class (212 platform), manufactured from july 2010 through february 2011, r-class (251 platform), manufactured from april 2010 through april 2011, ml-class (w164 platform), manufactured from january 2010 through march 2011, gl-class (x164 platform), manufactured from march 2010 through march 2011, and model year 2012 s-class (221 platform) vehicles. The diesel fuel filter may leak from the area around the heating component.
    mbusa will contact owners, and dealers will inspect and replace the diesel fuel filter if necessary, free of charge. The safety recall began on november 30, 2011. Owners may contact mercedes-benz usa at 1-800-367-6372.
    owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  • Recall 79227 [USA]: Diesel fuel may be deposited on roads and making those roads slippery, increasing the potential for a crash.
    Mercedes benz is recalling certain model year 2011 m-class, model w164, gl-class, model x164, e-class, model w212, r-class, and model v251vehicles. The o-ring may not have been properly lubricated in all cases. Lack of lubrication can lead to leakage of the fuel filter.
    dealers will replace the fuel filters free of charge. The safety recall began on november 24, 2010. Owners may contact mercedes benz at 1-800-367-6372. This campaign has been superseded . Please see recall campaign 11v-496.
    owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  • Recall R/2011/172 [UK]: Fuel may leak
    Fuel leaks in the plug area of the drain opening may occur at the fuel filter with integrated fuel heaters. Fuel can escape and is noticeable to the customer due to a corresponding diesel odour. The diesel can reach the road and as a result friction between the tyres and road surface may be decreased.
    check filter and replace as necessary.

  • Recall R/2021/277 [UK]: The driver's air bag may have a chemical change to its propellant over time
    The driver's airbag may have a chemical change to its propellant over time.
    replace the driver?S airbag.

  • Recall 2016158 [Canada]: Airbag
    On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: dealers will replace the front driver air bag module.

  • Recall 2011359 [Canada]: Fuel supply
    On certain vehicles equipped with a diesel engine, the fuel filter assembly may develop a leak from the fuel heater o-ring seal. Diesel fuel spilt on the roadway could endanger other road users by making the roadway unexpectedly slippery. This could ultimately result in a vehicle crash causing property damage and/or personal injury. Correction: dealers will inspect and, if necessary, replace the diesel fuel filter assembly.

  • Recall 2010375 [Canada]: Fuel supply
    On certain gl350, ml350 and r350 bluetec vehicles, the diesel fuel filter may have an o-ring that was not properly lubricated during assembly, which could lead to a diesel fuel leakage. As a result, diesel fuel may be deposited on the road and create a risk a crash. Correction: dealers will replace the fuel filter.

  • Recall 2022237 [Canada]: Brakes
    Issue: on certain vehicles, corrosion could cause the brake booster to fail. If this happens, there may be an increase in brake pedal effort and increase the distance needed to stop the vehicle. In rare cases of severe corrosion, the brake booster could separate completely and cause a loss of brakes. Safety risk: a loss of brakes can increase the risk of a crash. Corrective actions: mercedes-benz advises you to stop driving your vehicle immediately. The company will notify owners by mail and instruct you to contact a local mercedes-benz dealership to arrange for towing and an inspection. The dealer will remove the rubber brake booster sleeve and determine whether the vehicle is safe to drive or if it can't be driven and a parts replacement is necessary. Also, depending on the results of the inspection, you may need to return within two years for a re-inspection.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • LI-54-10 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY: Mercedes-benz: battery discharge because no-load discharge too high. *rm
  • SB-40-10-72 - WHEELS: Mercedes-benz: installation information of bolted wheel connections. All models. *rm
  • LI-05-20-P - ENGINE AND ENGINE COOLING:ENGINE: Mercedes-benz: the malfunction light is on with multiple possible trouble codes stored. There could be a problem with the camshaft and/or scoring of a piston. *rm
  • LI-27-60-P049270 - POWER TRAIN:AUTOMATIC TRANSMISSION: Mercedes-benz: the auto-transmission switches to limp home mode or has no power. There are multiple possible fault codes. A piston may be damaged. *rm
  • SB-20101100005 - ELECTRICAL SYSTEM:SOFTWARE: Mercedes-benz: software update for heater lines. *rm
  • LI-27-50 - POWER TRAIN:AUTOMATIC TRANSMISSION: Mercedes-benz: the transmission switches to limp-home mode while driving. Gearshifts are no longer possible. This is caused by a fault with the rpm sensor. *rm updated 9/20/11. *pe updated 5/9/14. *pe
  • SB-32-25-82 - SUSPENSION:REAR:SHOCK ABSORBER: Mercedes-benz: shock absorber procedure. *rm
  • SB-91-60-193 - AIR BAGS: Mercedes: airbag durability and reliability. Air bag srs control module (n2/2) does not have a set shelf life and will normally be reliable for the life of a vehicle. With 164, 216 221, 251 and newer, the airbag control unit can be reset

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.