Mercedes Benz S350 2007
Vehicle Details: Consumer Complaints, Service Bulletins
Below you will find all available information on the 2007 MERCEDES BENZ S350.
| Manufacturer | Known WMI(s) | Fuel Type |
|---|---|---|
| MERCEDES BENZ |
MERCEDES BENZ VIN Decoder
Use the box here to look up VINs from MERCEDES BENZ as well as other manufacturers
NHTSA Mandated Recalls
Bulletins
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- LI91.18-P-077075 - SEATS: Crease formation on genuine leather seat covers in vehicles with low mileage ??A?A? Objects left on the seats for extended periods of time (pressure marks). ??A?A? Objects wedged between the seat backrest and seat cushion (e.G. Seat bel
- LI8270P055572 - ELECTRICAL SYSTEM:SOFTWARE: Mobile phone cotacts are not transferred completely.
- LI8210P0647661 - EXTERIOR LIGHTING:HEADLIGHTS: Headlamps fogged.
- LI8220P073063 - INTERIOR LIGHTING: Touch pad: search lighting does not dim or does not turn on.
- LI54.30-P-072145 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Ntg5.5: incorrect time shown on instrument cluster, comand display, and analog clock
- LI27.50-P-071658 - POWER TRAIN: Harsh engagement when changing gear range from p to d or r
- LI27.50-P-049281 - POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL): Harsh engagement when changing gear range from p to d
- LI27.60-P-071237 - POWER TRAIN: 5 to 4 coasting downshift - shift quality concern with cold trans- mission oil on model 217 or 222 in combination with engi- ne 278 and transmission 722.9 without code 835/498
- P-B-54.10-225d - ELECTRICAL SYSTEM: If it is necessary to replace an hv battery, the return will only be accepted with the filled-out ?Analysis sheet for transportability of high-voltage batteries form? Accompanied by: , the removed part, the quick test printout, the bms co
- LI47.40-P-053871 - ENGINE AND ENGINE COOLING: Engine diagnosis warning lamp activated. Fault code P045600 "very fine leak" or P044200 "fine leak" stored in engine control unit.
- LI49.20-P-056353 - ELECTRICAL SYSTEM: Engine diagnosis warning lamp active. Fault code 20be1b and/or 20bd1b (the heating element of the adblue tank has a malfunction) is logged in the blue-tec control unit.
- LI18.30-P-055434 - ENGINE AND ENGINE COOLING: Traces of oil in area of oil cooler (inner v) on engine 642
- LI14.20-P-052079 - ENGINE AND ENGINE COOLING: Engine diagnosis warning lamp lights up - fault code entry (fc) 14a600 or 14a700
- GI88.40-P-057430 - EQUIPMENT: Message in instrument cluster "distronic pluscurrently unavailable - see owner's manual"
- C1A140101 - EQUIPMENT:ELECTRICAL: This customer 1 action has been initiated because certain mbrace subscribers were recently contacted by mbrace informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the verizon
- LI91.40-P-059364 - SEAT BELTS: Seat belt height adjustment nonfunctional
- LI91.30-P-048290 - SEATS: Grinding noises can occur in the backrest on active multicontour seats with the backrest under load and the seat ventilation switched on
- LI91.25-P-059392 - SEATS: No inflation of one or more air cushions on the massage/multicontour/dynamic seat modules (driver, front passenger and rear) bubble formation in one or more seats with massage/multicontour/dynamic seat modules (driver, front passenger and
- LI91.25-P-059382 - SEATS: Dynamic seat (ds) pneumatic pump / multicontour seat pneumatic pump makes noises.
- LI91.25-P-059380 - SEATS: Pneumatic comfort systems with insufficient performance, entirely inoperative or leaky.
- LI91.25-P-048132 - ELECTRICAL SYSTEM: Multicontour system fails during air release procedure. The system becomes operational again after an ignition change. Fault code 9e8900 is stored.
- LI91.10-P-059389 - SEATS: Noises from lock of valuables/stowage compartment or from gap cover between seat and center tunnel.
- LI91.10-P-048504 - SEATS: Squeaking/creaking noises from area of seat adjuster
- LI91.10-P-047382 - SEATS: Creaking noises can occur when the side bolster bladders are inflated and deflated
- LI68.05-P-059193 - EQUIPMENT:ELECTRICAL:ANTI-THEFT DEVICES: Sentex gate operator with clik card remote not compatible with homelink
- LI54.10-P-060034 - ELECTRICAL SYSTEM: Vehicle cannot be unlocked (cl), engine does not start - 12v starter battery discharged
- LI82.70-P-060004 - EQUIPMENT:ELECTRICAL: Iphone mobile phone: various complaints after software update to ios8
- LI80.61-P-061174 - ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:CONTROL MODULE: Vehicle cannot be opened via keyless-go and radio remote control
- LI46-30P054912 - STEERING:HYDRAULIC POWER ASSIST SYSTEM: Mercedes (xentry): at the wiring harness for power supply, and in combination with noises, with reduced power assistance when steering, oil is seen at power supply connector of electrohydraulic power steering pump. Models 221 and 216. No
- LI-88-70 - EXTERIOR LIGHTING:TURN SIGNAL: Mercedes benz: the turn signal light on the mirror fogs up due to temperature differences. *rm
- LI32-50 - ENGINE AND ENGINE COOLING: Mercedes-benze: there is a leakage at the press-fit sleeve of a pulsation damper. This is caused by high heat entering the system or tension in the line. *rm
- SB-32-25-82 - SUSPENSION:REAR:SHOCK ABSORBER: Mercedes-benz: shock absorber procedure. *rm
- LI-82-10/598B - EXTERIOR LIGHTING: Xentry (mercedes benz): replacing exterior light bulbs. Exterior lights. Li did not match dtb from which it was created. (main remedy for repair was missing.) *pe
- SB-91-60-193 - AIR BAGS: Mercedes: airbag durability and reliability. Air bag srs control module (n2/2) does not have a set shelf life and will normally be reliable for the life of a vehicle. With 164, 216 221, 251 and newer, the airbag control unit can be reset
- TSB-42-10-109 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS: Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. Once the corrosion protection is damaged or removed the brake components an
- SC-2007100004 - POWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE): Mercedes: replace transfer case on affected vehicles optimized transfer cases will reduce vibrations when cornering or when parking. Models 203, 211, 220. *pe
- PB-32-22-77 - SUSPENSION: Mercedes: vehicle does not lower and/or airmatic visit workshop display in instrument cluster. Model 220. Model years unknown. *pe updated 7/13/11. *pe
- PB-42-45-107 - SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:WHEEL SPEED SENSOR: Mercedes: esp service required displayed in instrument cluster. Also includes 4matics, bi turbos and kompressors. Models 215 and 220. Model years unknown. *pe
- TB-82-10-668 - ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL: Mercedes: warning message right low beam- check bulb; or left low beam-check bulb in instrument cluster. Due to the fact that the xenon burner may not be ignited on first attempt due to tolerances in ignition voltage. Model years unkn
- PB-54-18-208 - ELECTRICAL SYSTEM:WIRING: Mercedes: display in instrument cluster "air suspension" or "abc service required" is displayed in the instrument cluster, the engine wiring harness may have been damaged by the wiper linkage. Models 215.3 and 220. Model years unknown.
- PB-32-50-35C - SUSPENSION: Mercedes: the vehicle's suspension level randomly lowering while driving and/or rapid sporadic level changes shortly after stopping the vehicle, replace the body acceleration sensors. Models 215.3, 220, and 230. Model years unknown.
- 2006110005 - UNKNOWN OR OTHER: Install software for navigation system. *kb updated 3/5/09. *pe
- 470036 - FUEL SYSTEM, OTHER:STORAGE:FUEL GAUGE SYSTEM: Mercedes: the fuel level indicated in the instrument cluster does not match the actual fill level. This may be caused by a fault in the fuel level sensor function chain: hydraulic and electrical lines and their connections, rear sam or in
Most Recent Consumer Complaints and Accidents
| Crash | Fire | Towed | Injured | Deaths | Failure Date |
|---|
| No | No | N | None | None | 20100531 |
Tl* the contact owns a 2007 mercedes benz e350. The contact stated that after refueling, a fuel odor emitted from the interior and exterior of the vehicle. The vehicle was taken to an independent mechanic where it was determined that the fuel pump needed to be replaced. The contact was also informed that the failure was caused by normal wear and tear. The manufacturer was not contacted about the failure. The failure mileage was not available. The vin was not available. Updated 4/23/13 *cn updated 05/22/2013 *js
| No | No | N | None | None | 20070408 |
Tl*the contact owns a 2007 mercedes benz s350. While driving approximately 5 mph onto an exit ramp, the engine decreased in power and hesitated. The failure occurred without warning. The vehicle was taken to an authorized dealer, but the failure could not be duplicated. The vehicle was taken to an authorized dealer on three separate occasions for the same failures, but there were no resolutions. The engine was recoded. Recently, the engine stalled and the warning indicators illuminated on the instrument panel. The warning indicator remained lit until the engine was turned off. The contact was concerned of the safety risk involved. The failure mileage was 150 and current mileage was 11,312.