Mercedes Benz Sl230 2007
Vehicle Details: Recalls, Service Bulletins
Below you will find all available information on the 2007 MERCEDES BENZ Sl230.
Manufacturer | Known WMI(s) | Fuel Type |
---|---|---|
MERCEDES BENZ |
Use the box here to look up VINs from MERCEDES BENZ as well as other manufacturers
-
Are there recalls for the 2007 MERCEDES BENZ Sl230?
- There are 1 recall(s) for the 2007 MERCEDES BENZ Sl230, additional information is below.
Recall 80508 [USA]: A variation in the transmitted values between affected and unaffected sensors can result in one front strut adjusting to a value indicating body movement while another strut does not adjust presenting the driver with an uneven front suspension. this condition may lead to unexpected body movements at the front axle which can adversely influence the vehicle's directional stability and could lead to a vehicle crash.
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- LI27.60-P-059296 - POWER TRAIN: Selector lever blocks in position "p" (brake applied)
- LI83.00-P-052510 - ELECTRICAL SYSTEM: Malfunctions of various control units and/or on-board power supply problems caused by water in the control unit tray under the driver/front passenger seat (dislocated, pinched or leaking condensation hose)
- SB-32-25-82 - SUSPENSION:FRONT:SPRINGS:AIR SUSPENSION SYSTEM: Mercedes-benz: shock absorber procedure. *rm
- LI-54-25-P047464 - POWER TRAIN:MANUAL TRANSMISSION: Mercedes (xentry): implausible gear indicator on instrument cluster, shift paddles non functional. No model years listed. *pe
- LI-42-46 - SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE: Xentry(mercedes): sbc control unit cannot be programmed. The sbc control unit is aborted at 20% progress. Due to a defective electronic component in the sbc module, communication between the sbc module and the sbc control unit (a7/3n1) is
- SB-91-60-193 - AIR BAGS: Mercedes: airbag durability and reliability. Air bag srs control module (n2/2) does not have a set shelf life and will normally be reliable for the life of a vehicle. With 164, 216 221, 251 and newer, the airbag control unit can be reset
- TSB-42-10-109 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:DRUM: Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. Once the corrosion protection is damaged or removed the brake components an