MERCEDES BENZ SL500Mercedes Benz Sl500

Vehicle Details: Consumer Complaints, Service Bulletins

Below you will find all available information on the MERCEDES BENZ SL500.

ManufacturerKnown WMI(s)Fuel Type
MERCEDES BENZ
MERCEDES BENZ VIN Decoder

Use the box here to look up VINs from MERCEDES BENZ as well as other manufacturers

#
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • LI82.70-P-060004 - EQUIPMENT:ELECTRICAL: Iphone mobile phone: various complaints after software update to ios8
  • SCB-2013110012 - STRUCTURE:FRAME AND MEMBERS: Mercedes: moisture is entering spare tire well due to rear center section of seam seal not meeting specification. Model 2013 231 (sl). *pe
  • LI-42-46 - SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE: Xentry(mercedes): sbc control unit cannot be programmed. The sbc control unit is aborted at 20% progress. Due to a defective electronic component in the sbc module, communication between the sbc module and the sbc control unit (a7/3n1) is
  • LI-58-40 - ELECTRICAL SYSTEM: Xentry (mercedes): engine warning lamp is currently on or was on and a delay fault of the camshaft adjust to current or stored in the engine control unit. Models 171, 203, 209, 211, 219, 221, 216, 230, 164, 251, and 403. No model years li
  • TSB-42-10-109 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM:SHOES/LININGS: Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. Once the corrosion protection is damaged or removed the brake components an
  • 470036 - FUEL SYSTEM, OTHER: Mercedes: the fuel level indicated in the instrument cluster does not match the actual fill level. This may be caused by a fault in the fuel level sensor function chain: hydraulic and electrical lines and their connections, rear sam or in
  • PB070021E - ENGINE AND ENGINE COOLING:ENGINE: Engine noise. (mercedes benz e500, sl500, clk500 and s500, year 2003.) *jb
  • 270036 - POWER TRAIN:AUTOMATIC TRANSMISSION: Transmission slip in 4th gear at 40 mph with light engine load and code P2500 stored in the transmission control module. *tt
Most Recent Consumer Complaints and Accidents
CrashFireTowedInjuredDeathsFailure
Date
NoNoN NoneNone20040111

When the brakes were applied. The pedal went down to the floor. *ak the dealer was unable to duplicate the problem.*jb

NoNoN NoneNone20030505

The consumer was informed the front tires were out of round and could not be balanced. *jb

NoNoN NoneNone20030216

When depressing the brakes at any speed, the consumer heard a knocking noise/vibration coming from the brake pedal. This resulted in extended stopping distance. *ak (mercedes benz sl500 2003) *sc *jb

Common OBD-II Error Codes
  • P2500 [1] Generator Lamp/L-Terminal Circuit Low
For a complete list of all consumer complaints and OBD II codes, see the Complaints page

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.