2010 MERCEDES-BENZ SLKMercedes-benz Slk 2010

Complaint Information: Service Bulletins, OBD II Codes

NHTSA Mandated Recalls
  • Recall R/2017/124 [UK]: Faulty control unit may cause vehicle to perform outside specification
    Where a control unit coding was updated in a workshop between 3 december 2016 and 5 december 2016 the coding may not correspond to the specification and may trigger unplanned action in the vehicle. The safety and emissions systems may not react as design intent.
    recall the vehicles that are likely to be affected and update the software in the corresponding control units.

  • Recall R/2021/277 [UK]: The driver's air bag may have a chemical change to its propellant over time
    The driver's airbag may have a chemical change to its propellant over time.
    replace the driver?S airbag.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • LI-07-10-P - ELECTRICAL SYSTEM: Mercedes-benz: the engine warning light is on with stored trouble codes. Idle speed limits were set too narrow. *rm
  • LI-05-20-P - ENGINE AND ENGINE COOLING:ENGINE: Mercedes-benz: the malfunction light is on with multiple possible trouble codes stored. There could be a problem with the camshaft and/or scoring of a piston. *rm
  • LI-27-60-P049270 - POWER TRAIN:AUTOMATIC TRANSMISSION: Mercedes-benz: the auto-transmission switches to limp home mode or has no power. There are multiple possible fault codes. A piston may be damaged. *rm
  • SB-32-25-82 - SUSPENSION:FRONT:SPRINGS:AIR SUSPENSION SYSTEM: Mercedes-benz: shock absorber procedure. *rm
  • C1A-091101 - ELECTRICAL SYSTEM:SOFTWARE: Mercedes benz: reprogram mbrace (n123/4) dialed numbers to hughes. This action applies to new vehicle inventory only. *pe
  • SB-91-60-193 - AIR BAGS: Mercedes: airbag durability and reliability. Air bag srs control module (n2/2) does not have a set shelf life and will normally be reliable for the life of a vehicle. With 164, 216 221, 251 and newer, the airbag control unit can be reset
  • TSB-42-10-109 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER: Mercedes: corrosion protection coatings for brake components and hardware may be damaged and or stripped away if highly concentrated acid based cleaners are used. Once the corrosion protection is damaged or removed the brake components an

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.