1988 MITSUBISHI PickupMitsubishi Pickup 1988

Vehicle Details: Investigations, Consumer Complaints, Service Bulletins

Below you will find all available information on the 1988 MITSUBISHI Pickup.

ManufacturerKnown WMI(s)Fuel Type
MITSUBISHI
MITSUBISHI VIN Decoder

Use the box here to look up VINs from MITSUBISHI as well as other manufacturers

#
NHTSA Mandated Recalls

No recalls could be found for this vehicle. To ensure accuracy and for your safety, do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • TSB-13-42A-002 - STRUCTURE: This technical service bulletin updates the door adjustment procedure in the body section of the applicable service manuals.
  • TT253 - EQUIPMENT: This is a service newsletter (tech talk) that was sent out to dealers.
  • TSB-19-00-008 - EQUIPMENT: This is a technical service bulletin sent to dealers. This bulletin supersedes tsb-18-00-003, issued april, 2018, to add updated information for carrying capacity reduced label.
  • TT237 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : This is a service newsletter (tech talk) that was sent out to dealers.
For a more detailed bulletin page, see the Complaints page
Known Recall Investigations

  • Takata seat belt buckle failure investigation # EA95004

    There is no summary currently available

Recall investigations are also available on the Complaints page
Most Recent Consumer Complaints and Accidents
CrashFireTowedInjuredDeathsFailure
Date
NoNoN NoneNone19881014

Clutch has been replaced 4 times on a 1988 mitsubishi, spx with less than 200,000 miles. Truck has not been used to haul or tow anything, and most of the miles has been interstate miles. *nm

CrashNoN NoneNone

Consumer was traveling at 50 mph when the rear wheels locked up due to the pin within the transmission which was not welded, resulting in an accident. Consumer contacted the manufacturer, manufacturer has done nothing. The pin was welded by the mechanic, vehicle is running fine except for grinding noise affected by loosened pin. *tt

For a complete list of all consumer complaints and OBD II codes, see the Complaints page

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.