Nissan Maxima 1983
Vehicle Details: Investigations, Consumer Complaints, Service Bulletins
Use the box here to look up VINs from NISSAN as well as other manufacturers
-
Where is the 1983 NISSAN Maxima produced?
- The 1983 NISSAN Maxima is produced in Chuo-Ku Tokyo, Japan.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- NTB-09-129 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Nissan: vent control valve replacement. When replacing the evap canister vent control valve for reason: use the one listed on page 2; for vent control valve replacement procedure, refer to the appropriate section of the electronic service
- NTB-09-101 - TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS: Nissan: tire pressure monitoring system (tpms) warning light on/flashing. No models or model years listed. *pe updated on 08-11-2011. *kb
- NTB-09-030 - ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES: Nissan: the 12 volt battery is an important part of the vehicle electrical system and is required to stay connected when the engine is running. To prevent damage to vehicle electronic components follow the instructions/cautions. No mod
Seat failures investigation # EA89031
Summary:approximately sixty percent of the reports alleged a failure ormalfunction of the seat back assembly, twelve of which involved anaccident.The remaining forty percent of the reports alleged a failureor malfunction of the seat track assembly, six of which involved anaccident.===
| Crash | Fire | Towed | Injured | Deaths | Failure Date |
|---|
| No | Fire | N | None | None | 19961230 |
The fuel injection is leaking fuel onto the engine comparment, causing a fire hazard recall #95i000600. *ak
| No | No | N | None | None | 19950910 |
Intermittent stalling. *sd
| No | No | N | None | None | 19950419 |
Fuel injectors leak. *dsh
| No | No | N | None | None | 19940629 |
Rack and pinion steering failed twice. In addition, fuel injectors leaked, causing heavy fumes and loss of power/ front right ball joint failed, causing vehicle to shimmy, and engine cooling system fan malfunctioned. *ak
| No | No | N | None | None |
After checking the recall section on the nhtsa web page and finding no recalls for this particular model, i decided to look at the consumer complaints and found a similar problem and noted in the text of office of defects investigations id # 808550 a recall #95i000600, at which time i called the hotline and was told that in spite of having a recall # , that there were no recalls for this particular model. My question is, how can there be a recall # if there is no recall? *mjs