Nova Bus Lfs 2005

Vehicle Details: Recalls, Service Bulletins

Below you will find all available information on the 2005 NOVA BUS LFS.

ManufacturerKnown WMI(s)Fuel Type
NOVA BUS
NOVA BUS VIN Decoder

Use the box here to look up VINs from NOVA BUS as well as other manufacturers

#

Sub-models: - Lfs Hev - Nova Lfs -

Frequently Asked Questions
  • Are there recalls for the 2005 NOVA BUS LFS?
     - There are 12 recall(s) for the 2005 NOVA BUS LFS, additional information is below.
NHTSA Mandated Recalls
  • Recall 67810 [USA]: A short could occur, possibly causing smoke and fire.

  • Recall 72775 [USA]: The introduction of high pressure atomized fuel into the engine compartment creates a risk of fire due to possible ignition when the fuel vapor comes in contact with hot surfaces.

  • Recall 2018456 [Canada]: Seats and restraints

  • Recall 2009050 [Canada]: Electrical

  • Recall 2009349 [Canada]: Other

  • Recall 2008133 [Canada]: Other

  • Recall 2008146 [Canada]: Electrical

  • Recall 2007066 [Canada]: Engine

  • Recall 2006182 [Canada]: Heater and defroster

  • Recall 2009050 [Canada]: Electrical

  • Recall 2008133 [Canada]: Other

  • Recall 2008146 [Canada]: Electrical

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • LI5170E - SUSPENSION: New lower shock mount available with an adapter plate better suited for the front and rear axle.
  • LI5179R1 - SERVICE BRAKES, AIR: Installation of new pressure regulator for retarder interlock. Obsolete part replacement
  • LI5179 - SERVICE BRAKES, AIR: Installation of new pressure regulator for interlock retarder. Obsolete part replacement
  • LI5180 - SERVICE BRAKES, AIR: Installation of new pressure regulator for interlock retarder. Obsolete part replacement.
  • LI3978E - EQUIPMENT: Information about the engine coolant. Coolant types should not be mixed in the engine.
  • LI5011E - EQUIPMENT: Recommendations on the disinfection of vehicles as well as products and precautions to be taken.
  • LI4432ER1 - STEERING: Trw has eliminated from service procedure tas-103 the greasing of the steering gearbox output shaft.
  • APS4896E - STEERING: Introduction of a new steering gearbox without the lubrication zerk.
  • LI4577ER1 - EQUIPMENT: The repair kit parts will require a specific installation procedure. Current stock parts may still be used
  • LI4546E - UNKNOWN OR OTHER: To avoid the risk of air being trapped which could damage the egr cooler.
  • LI4126E - ENGINE AND ENGINE COOLING: N64662 pal hydraulic filter head is discontinued and replaced by hydraulic filter head n8905938 and filter n8905939.
  • LI4223E - STRUCTURE:BODY: Repair procedure for cracks reoccurring on the flooring above the rear axle
  • LI3188 - SUSPENSION: A new radius rod bolt torque is now in effect.
  • LI2116E - SERVICE BRAKES, AIR:DISC: Diagnose a potentiel bendix disk brake thermal overload.
  • BS3419E - VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR: The wiper motor cannot be stopped by the driver.
  • LI1841ER3 - EXTERIOR LIGHTING:HEADLIGHTS: Repair procedure of the front beam box
  • LI1636AR1 - STRUCTURE: The stainless steel structure of certain vehicles, with an offset engine, might have been subject to certain constraints which may cause cracking
  • LI1636AR2 - STRUCTURE: The stainless steel structure of certain vehicles, with an offset engine, might have been subject to certain constraints which may cause cracking
  • LI1911ER1 - EQUIPMENT: Zf wheel head suspension. Zf introduced an optimized axial roller bearing. Replace the axial roller bearing and lower seal ring with an optimized roller bearing.
  • LI1953E - STEERING:HYDRAULIC POWER ASSIST SYSTEM: Moisture may accumulate in the space under the driver's seat and cause corrosion of the power steering hydraulic fittings and piping.
  • LI3446ER2 - STEERING:GEAR BOX:SHAFT PITMAN: Introducing new hardware and installation procedure for pitman arm. (r2 revision is for: road number and vin has been updated for l860 ttc)
  • li3446er5 - STEERING:GEAR BOX:SHAFT PITMAN: Introducing new hardware and installation procedure for pitman arm. (r5 updated the torque value in procedure line 1.9)
  • LI3446ER5 - SUSPENSION: Introducing new hardware and installation procedure for pitman arm. (r5 updated the torque value in procedure line 1.9)
  • LI3446ER4 - STEERING: Introducing new hardware and installation procedure for pitman arm.

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.