2009 PETERBILT 210Peterbilt 210 2009

Vehicle Details: Recalls, Decoded VIN Details, Service Bulletins

Below you will find all available information on the 2009 PETERBILT 210, manufacturered by Peterbilt Motors Company.
The vehicle is described as a Other Single-unit straight truck or Cab-Chassis (GVWR range 19,501 to 26,000 lbs.).

ManufacturerKnown WMI(s)Fuel Type
PETERBILT1NP 1XP 2NP 2XP 3BP 3WP Diesel
PETERBILT VIN Decoder

Use the box here to look up VINs from PETERBILT as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2009 PETERBILT 210 produced?
     - The 2009 PETERBILT 210 is produced in Denton Tx, United States (usa).
  • Are there recalls for the 2009 PETERBILT 210?
     - There are 1 recall(s) for the 2009 PETERBILT 210, additional information is below.
  • How much horsepower does the 2009 PETERBILT 210 have?
     - The 2009 PETERBILT 210 has 380 horsepower.
NHTSA Mandated Recalls

  • Recall 126478 [USA]: If the sway bar link detaches and falls into the drag link, it may impact the ability of the vehicle to steer properly, increasing the risk of a crash.

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Recalls are also available on the Complaints page
Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 02-160 - EQUIPMENT ADAPTIVE/MOBILITY: Information only a?? Windshield washer pumps have a high no trouble found rate. Washer pumps may fail to spray due to a clogged filter.
  • 32-015 - ELECTRICAL SYSTEM: Information only: this bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplet
  • 43-067 - STRUCTURE: Fix as fail: for all conventional models, except 387/587, equipped with side-of-cab (⿿soc⿝) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the soc exhaust stacks may not be tightened properly. This may allow the
  • 11-001 - POWER TRAIN: Information only: hendrickson softek front axle maintenance intervals and requirements.
  • 34-085 - ELECTRICAL SYSTEM: Information only a?? Vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
  • 32-016 - EQUIPMENT: Information only: proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
  • 34-085 - ELECTRICAL SYSTEM: Information only: vehicles may have the connector seal on the wheel speed sensor incorrectly installed, which may lead to sensor corrosion.
  • 01-075 - ENGINE AND ENGINE COOLING: Information only: this bulletin provides guidance for repairing an air-conditioning system after internal failure of the a/c compressor.
  • 34-066 - ELECTRICAL SYSTEM: Information only - quick reference guide for electric harness damage repairs.
  • 34-077 - EQUIPMENT:ELECTRICAL: Information only: proper instructions for closure of power distribution box cover to prevent corrosion.
  • 13-049 - ELECTRICAL SYSTEM:SOFTWARE: Information: bendix acom software version 6.16.5.0 for diagnostics may introduce an unrecoverable error. Notice to dealers to replace this version with older software version until bendix introduces new version.
  • 03-064 - ELECTRICAL SYSTEM: Information - recommended practices for updating esa software
NHTSA decoded information from VIN

1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.

Variable Value
Additional Error TextThe error positions are indicated by ! in Suggested VIN. In the Possible values section, each pair of parenthesis indicate information about each error position in VIN . The Numeric value before the : indicates the position in error and the values after the : indicate the possible values that are allowed in this position Unused position(s): 7,8,11; Invalid character(s): 14:D;
Body ClassTruck
DisplacementCC12900.0
DisplacementCI787.20629882204
DisplacementL12.9
Drive TypeOther
Engine ConfigurationIn-Line
Engine Cycles4
Engine Cylinders6
EngineHP380
EngineHP_to510
Engine ManufacturerPACCAR
Engine ModelMX/MX-13
Error Code1,5,14,400
Error Text1 - Check Digit (9th position) does not calculate properly; 5 - VIN has errors in few positions; 14 - Unable to provide information for some of the characters in the VIN, based on the manufacturer submission.; 400 - Invalid Characters Present
Fuel Type PrimaryDiesel
MakePETERBILT
MakeID495
ManufacturerPETERBILT MOTORS COMPANY
Manufacturer Id1033
Model210
ModelID2796
Model Year2009
NCSA MakePeterbilt
NCSA ModelMedium/Heavy – COE high entry
Possible Values(7:056789EGT)(8:ABGHX)(11:DFKLMNPS)
SuggestedVIN1XP1XP!!39!7N!814
VIN1XP1XPBD39X7ND814
Vehicle Descriptor1XP1XPBD*9X
Vehicle TypeTRUCK
More information on VIN Requirements can be found at Title 49
Latest VINs Decoded for this Manufacturer
VIN Year Model Manufactured In
3BP1HM6X09F5900142009210MEXICALI BAJA CALIFORNIA, MEXICO

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.