Peterbilt 357 2001

• Recall 52368 [USA]: Seizure of the bearings can cause wheel separation or wheel end fire.
  On certain trucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's ff98x series non-drive steer axles, the hub unit bearings can wear prematurely.
  dealers will replace all front axle hubs. Notification began july 16, 2003. The manufacturer has advised us that parts will not be available until september 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy with a reasonable time should contact peterbilt at 940-591-4201 or kenworth 425-828-5440.
  kenworth recall no. 03kw2 and peterbilt recall no. 303-a.Customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 1387 [USA]: Bolts torqued below specification will not reliably prevent air leakage at the affected abs valve package interface joints once the component begins normal vehicle operation. if air leaks develop at any of the abs valve package interface joints, brake system pressure reductions could occur during braking or normal operation with units equipped with the traction control option, potentially extending stopping distances, possibly resulting in a vehicle crash.
  On certain heavy duty trucks equipped with meritor wabco pneumatic anitlock brake system (abs) valve packages, the assembly bolts on these valve packages were not tightened correctly.
  dealers will tighten the fasteners to the proper specification. Owner notification began february 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4201.
  also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 6894 [USA]: If the linkage binds, full engagement of the door latch may not occur, allowing the door to open inadvertently.
  Vehicle description: heavy duty trucks. A change in the internal linkage of certain cab doors has created a possible binding condition.
  dealers will modify the door linkage to correct the potential of binding. Owner notification began june 22, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000.
  also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 4983 [USA]: This condition can result in the loss of vehicle control without warning, increasing the risk of a crash.
  Vehicle description: heavy duty trucks. The bolts used to secure the steering shaft can fail.
  dealers will replace the defective bolts. Owner notification began april 2, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000.
  also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 5580 [USA]: In the event of a crash, the shoulder belt anchorage may not properly restrain the seat occupant, increasing the risk of personal injury.
  Vehicle description: class 7 and class 8 vehicles. These vehicles do not comply with the requirements of fmvss no. 207, "seating system," and no. 210, "seat belt assembly anchorages." some fasteners used to attach the shoulder belt anchor bracket to the cab structure were omitted during production.
  dealers will add the necessary fasteners. Owner notification began march 19, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000.
  also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 2002016 [Canada]: Airbag
  Certain heavy-duty trucks equipped with meritor wabco pneumatic antilock brake system (abs) valve packages. The assembly bolts on these valve packages were not tightened correctly. Bolts torque below specification will not reliably prevent air leakage at the affected abs valve package interface joints once the component begins normal vehicle operation. If air leaks develop at any of the abs valve package interface joints, brake system pressure reductions could occur during braking or normal operation with units equipped with the traction control option, potentially extending stopping distances, possibly resulting in a vehicle crash. Correction: dealers will tighten the fasteners to the proper specification.

  Show Content

• Recall 2001102 [Canada]: Seats and restraints
  Certain vehicles do not comply with the requirements of cmvss 210 - seat belt assembly anchorages." some fasteners used to attach the shoulder belt anchor bracket to the cab structure were omitted during production. In the event of a crash, the shoulder belt anchorage may not properly restrain the seat occupant, increasing the risk of personal injury. Correction: dealers will install adddtional huck fasteners in the shoulder belt anchor brackets.

  Show Content

• Recall 2001103 [Canada]: Steering
  On certain vehicles, the bolts used to secure the steering shaft can fail. This condition can result in the loss of vehicle control without warning, increasing the risk of a crash. Correction: dealers will replace the defective bolts.

  Show Content

• Recall 2001162 [Canada]: Powertrain
  Certain peterbilt class 7 and 8 tractors with interaxle driveshafts produced and supplied by spicer driveshaft, inc. (sdi). The sdi driveshafts with universal joint cap bolts were not tightened to sdi's full torque specification. If the driveshaft assembly became separated from the retaining bolts, the interaxle could be ejected from the truck's driving axles, resulting in hazardous debris. This could occur with little or no prior warning to the vehicle's driver, and could also result in loss of vehicle power. Correction: dealers will re-torque the retaining bolt fasteners.

  Show Content

• Recall 2001175 [Canada]: Structure
  On certain vehicles, a change in the internal linkage of cab doors has created a possible binding condition. If the linkage binds, full engagement of the door latch may not occur, allowing the door to open inadvertently. Correction: dealers will modify the door linkage to correct the potential of binding.

  Show Content

• Recall 2001218 [Canada]: Steering
  Certain heavy duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness. This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle. Correction: dealers will remove and replace all affected tie rods and drag links with different designed ends.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.