Peterbilt 377 1999

• Recall 213 [USA]: This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
  Heavy duty trucks equipped with trw tie rod ends on certain arvinmeritor and dana axles. Peterbilt will recall 1,434 vehicles equipped with arvinmeritor axles manufactured from december 11, 1999, to may 14, 2000, and from july 22 to september 30, 2000. Kenworth will recall 859 vehicles equipped with arvinmeritor vehicles manufactured from december 11, 1999, to may 23, 2000, and from july 27, 2000, to september 30, 2000 and kennworth will recall an additional 4,151 vehicles equipped with dana axles and manufactured from june 23 to december 6, 1999, and from may 23 to september 30, 2000. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
  dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began july 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4201 or kenworth at 1-425-828-5440.
  also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 6882 [USA]: If the linkage binds, full engagement of the door latch may not occur, allowing the door to open inadvertently.
  Vehicle description: heavy duty trucks. A change in the internal linkage of certain cab doors has created a possible binding condition.
  dealers will modify the door linkage to correct the potential of binding. Owner notification began june 22, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000.
  also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 4399 [USA]: If this condition occurs, the driver can lose partial control of the right front wheel, possibly resulting in a crash.
  Vehicle description: heavy duty trucks equipped with tie rod assemblies manufactured by trw. The suspect tie rods contain 24-dl model ball sockets. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket.
  dealers will replace the defective ball sockets and/or drag links. Owner notification began on april 10, 2001, to kenworth owners and on april 25, 2001, to peterbilt owners. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000, peterbilt at 1-940-591-4000 or trw customer service at 1-866-280-3287.
  also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 11248 [USA]: Increased steering effort can occur.
  Vehicle description: heavy duty trucks equipped with caterpillar engines and eaton autoshift transmissions. The engines can stall because of software problems.
  dealers will update these engines with software changes. Caterpillar is conducting the owner notification and remedy of this recall.
  owner notification is expected to begin during august 1999.Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-206-828-5418 or peterbilt at 1-940-591-4000.Also contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

  Show Content

• Recall 2001106 [Canada]: Steering
  Certain vehicles equipped with trw brand tie rod model number 24-dl. The tie rod ball-socket bearings have a below specification case depth and/or hardness, which can lead to premature wear of the socket. If this condition occurs, the driver can lose partial control of the right front wheel, possibly resulting in a crash. Correction: dealers will replace the defective ball sockets and/or drag links.

  Show Content

• Recall 2001168 [Canada]: On certain vehicles equipped with meritor fg941 front axles and manufactured between august 20, 1996 and april 4, 2001 steer a
  On certain vehicles equipped with meritor fg941 front axles and manufactured between august 20, 1996 and april 4, 2001 steer axles the gawr is overstated on the vehicle certification label. Correction: dealers will assign the correct weight rating or change the necessary components to meet the currently assigned weight rating.

  Show Content

• Recall 2001175 [Canada]: Structure
  On certain vehicles, a change in the internal linkage of cab doors has created a possible binding condition. If the linkage binds, full engagement of the door latch may not occur, allowing the door to open inadvertently. Correction: dealers will modify the door linkage to correct the potential of binding.

  Show Content

• Recall 2001218 [Canada]: Steering
  Certain heavy duty trucks equipped with trw tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness. This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle. Correction: dealers will remove and replace all affected tie rods and drag links with different designed ends.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.