Peterbilt 378 2004

• Recall 101216 [USA]: As a result, the axles may be overloaded or the wrong tires could be installed or the tires could be improperly inflated. all of these issues increase the risk of a crash.
  Paccar incorporated (paccar) is recalling certain 2004-2013 peterbilt 379, 357, 378, 367, 388, 365, 389, 385 and 386 trucks manufactured from april 3, 2003, through october 25, 2013 and equipped with tri-drive rear axles and a tag or pusher axle. The affected vehicles may be missing required information from the certification label, specifically the tag or pusher axle the gross axle weight rating, suitable tire and rim information, and recommended tire pressure information. Without this information, the vehicles do not comply with the requirements of 49 c.F.R. Part 567, "certification."
  peterbilt will notify owners and dealers will inspect and replace the certification labels missing the necessary information. The recall is expected to begin in january 2014. Customers can contact peterbilt at 1-940-591-4000. Peterbilt's number for this campaign is 1113-f.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 43564 [USA]: The absence of this air hose could adversely affect the drive axle brake performance while a trailer is being pulled, resulting in longer stopping distances, increasing the risk of a crash.
  On certain non-abs equipped trucks, an air hose between the tractor protection valve and the back of the cab bulkhead was omitted.
  peterbilt will inspect the air hose plumbing of the drive axle brake system and make the necessary repairs. The recall began on february 22, 2007. Owners may contact peterbilt at 1-940-591-4196.
  peterbilt recall no. 107b.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 60363 [USA]: The oil line may be cut on the cylinder head causing an oil leak and a possible fire.
  On certain tractors equipped with caterpillar diesel engines, the variable valve actuation oil line may wear against the sharp edge of the cylinder head if not positioned correctly.
  caterpillar, in conjunction with paccar, will be conducting the owner notification and remedy for this campaign free of charge. Owners may call caterpillar at 309-675-6496, kenworth at 425-828-5440, or peterbilt at 940-591-4201.
  kenworth recall no. 05kw7 and peterbilt recall no. 1205e.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236(tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 2009247 [Canada]: Engine
  On certain vehicles equipped with a caterpillar c15 engine, the variable valve actuation (vva) oil line may wear against the p-clip retaining the oil line. An oil leak could result in a vehicle fire causing property damage and/or personal injury. Correction: caterpillar dealers will replace the vva oil line with an updated version.

  Show Content

• Recall 2005402 [Canada]: Engine
  On certain vehicles equipped with a caterpillar engine, the variable valve actuation oil line (vva line) used on 6 cylinder, 15l turbocharged and air-to-air aftercooled diesel engines may wear against the sharp edge of the cylinder head if not oriented correctly. Oil line wear may cause an oil leak and a potential fire hazard. Correction: dealers will inspect and, if required, replace the vva line.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

Information redacted pursuant to the freedom of information act (foia), 5 u.S.C. 552(b)(6) low engine heat and coolant leaking from oil cooler, started on cold day back december 14th 2009, took truck to dealership. Wanted oil cooler resealed and two thermostats replaced. Vehicle has third party warranty. Dealer asked permission to tear down, we denied action, said to diagnose problem according to warranty protocol. Dealer completely dismantles motor incorrectly causing irreparable damage. Now dealer is holding vehicle hostage since we will not sign release of law suit for damage. Dealer never told us they were doing this. As an alterer of manufactured vehicles my self, i do remember that a repair shop has no authority to place a vehicle in an unsafe or inoperable condition. After the fact of this, i have seen vehicles that have been modified from the original design, that may not be properly done or even have an alterers decal showing changes to suspension, drilling and cutting of frames and so on. I am writing you on this for a possible investigation of the dealer. I have also since found this is a normal practice with this dealer. I have contacted the bbb and they have an f rating for this company on complaints. The dealer never responds. I do have an attorney involved, and would also like some assistance in this matter in my personal opinion, i feel this company could be placing people in harms way for faulty repairs, and modifications. [xxx] *tr