Peterbilt 379 2012
Vehicle Details: Recalls, Decoded VIN Details, Service Bulletins
Below you will find all available information on the 2012 PETERBILT 379.
The vehicle is described as a 6x4 Truck-tractor (Cab only, or with any number of trailing unit; any weight).
Manufacturer | Known WMI(s) | Fuel Type |
---|---|---|
PETERBILT |
Use the box here to look up VINs from PETERBILT as well as other manufacturers
-
Where is the 2012 PETERBILT 379 produced?
- The 2012 PETERBILT 379 is produced in Denton Texas, United States (usa).
-
Are there recalls for the 2012 PETERBILT 379?
- There are 4 recall(s) for the 2012 PETERBILT 379, additional information is below.
-
What is the GVWR of a 2012 PETERBILT 379?
- The 2012 PETERBILT 379 has a GVWR of Class 8: 33,001 lb and above (14,969 kg and above) lbs.
Recall 117264 [USA]: If the tires are underinflated due to the incorrect inflation pressure listed on the label, the truck may not be able to carry the maximum gross vehicle weight rating (gvwr) load listed without experiencing tire failure which would increase the risk of a crash.
Recall 101263 [USA]: As a result, the axles may be overloaded or the wrong tires could be installed or the tires could be improperly inflated. all of these issues increase the risk of a crash.
Recall 2015095 [Canada]: Label
Recall 2013420 [Canada]: Label
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- 02-160 - EQUIPMENT ADAPTIVE/MOBILITY: Information only a?? Windshield washer pumps have a high no trouble found rate. Washer pumps may fail to spray due to a clogged filter.
- 32-015 - ELECTRICAL SYSTEM: Information only: this bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplet
- 43-067 - STRUCTURE: Fix as fail: for all conventional models, except 387/587, equipped with side-of-cab (a??Soca??) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the soc exhaust stacks may not be tightened properly. This may allow the
- 11-001 - POWER TRAIN: Information only: hendrickson softek front axle maintenance intervals and requirements.
- 34-085 - ELECTRICAL SYSTEM: Information only vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
- 32-016 - EQUIPMENT: Information only: proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
- 34-085 - ELECTRICAL SYSTEM: Information only: vehicles may have the connector seal on the wheel speed sensor incorrectly installed, which may lead to sensor corrosion.
- 03-071 - ELECTRICAL SYSTEM:SOFTWARE: Information only - vehicles built with namux software from 2013 to present may experience accuracy issues with the tachometer. The issue can be temporarily resolved using any one of the included procedures.
- 01-075 - ENGINE AND ENGINE COOLING: Information only: this bulletin provides guidance for repairing an air-conditioning system after internal failure of the a/c compressor.
- TIB43-062 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Information only ??A?A? This bulletin provides information about the california air resources board (carb) periodic smoke inspection program (psip) and heavy duty vehicle inspection program (hdvip).
- 42-058 - ENGINE AND ENGINE COOLING: Fix-as-fail: two separate causes have been identified as root cause of intermittent low coolant indicator illumination.
- 34-066 - ELECTRICAL SYSTEM: Information only - quick reference guide for electric harness damage repairs.
- 34-077 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Information only: proper instructions for closure of power distribution box cover to prevent corrosion.
- 13-049 - ELECTRICAL SYSTEM:SOFTWARE: Information: bendix acom software version 6.16.5.0 for diagnostics may introduce an unrecoverable error. Notice to dealers to replace this version with older software version until bendix introduces new version.
- 03-064 - ELECTRICAL SYSTEM: Information - recommended practices for updating esa software
1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.
Variable | Value |
---|---|
Body Cab Type | MDHD: Conventional |
Body Class | Truck |
Brake System Type | Air |
Drive Type | 6x4 |
Engine Manufacturer | Cummins |
Engine Model | ISX 11.9/12 |
Error Code | 1 |
Error Text | 1 - Check Digit (9th position) does not calculate properly |
GVWR | Class 8: 33,001 lb and above (14,969 kg and above) |
Make | PETERBILT |
MakeID | 495 |
Manufacturer | PETERBILT MOTORS COMPANY |
Manufacturer Id | 1033 |
Model | 379 |
ModelID | 2046 |
Model Year | 2012 |
NCSA Body Type | Single-unit straight truck or Cab-Chassis (GVWR greater than 26,000 lbs.) |
NCSA Make | Peterbilt |
NCSA Model | Medium/Heavy - CBE |
Plant City | DENTON |
Plant Company Name | Peterbilt |
Plant Country | UNITED STATES (USA) |
Plant State | TEXAS |
VIN | 1NP5L79X1CD151914 |
Vehicle Descriptor | 1NP5L79X*CD |
Vehicle Type | INCOMPLETE VEHICLE |
VIN | Year | Model | Manufactured In |
---|---|---|---|
1XP5D79X1CD166898 | 2012 | 379 | DENTON TEXAS, UNITED STATES (USA) |
1NP5L79X1CD151914 | 2012 | 379 | DENTON TEXAS, UNITED STATES (USA) |