Peterbilt 387 2008

• Recall 146150 [USA]: If the driver unknowingly operates the vehicle without the abs functioning, there would be an increased risk of a crash.
  Paccar incorporated (paccar) is recalling certain 2008-2019 peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 kenworth t170, t270, t370, t660, t680, t800, t880, and w900 vehicles equipped with namux software. In the event that the anti-lock brake system (abs) loses battery and/or ignition power to the controller, the dash warning light for the abs may not illuminate to warn the driver of the loss of abs. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard (fmvss) number 121, "air brake systems," and 136, "electronic stability control system on heavy vehicles."
  paccar will notify owners, and dealers will update the namux software within the cab control module, free of charge. Paccar issued owners an interim notification on june 4, 2020. The recall began may 26, 2020. Owners may contact kenworth customer service at 1-425-828-5888 or peterbilt customer service at 1-940-591-4220. Paccar's number for this recall is 20pbc and 20kwb.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 117150 [USA]: If the tires are underinflated due to the incorrect inflation pressure listed on the label, the truck may not be able to carry the maximum gross vehicle weight rating (gvwr) load listed without experiencing tire failure which would increase the risk of a crash.
  Paccar incorporated (paccar) is recalling certain model year 2006-2016 peterbilt 587, 579, 567, 389, 388, 387, 385, 382, 379, 378, 367, 365 and 357 trucks manufactured july 25, 2005, to february 26, 2016. The affected vehicles may be equipped with tire and rim certification labels that list a tire pressure below the actual correct amount. As such, these vehicles fail to comply with the requirements of federal motor vehicle safety standard no. 120, "tire selection and rims and motor home/recreation vehicle trailer load carrying capacity information for motor vehicles with a gvwr of more than 4,536 kilograms (10,000 pounds)."
  peterbilt will notify owners and mail them a corrected tire and rim certification label, free of charge. The recall began on june 19, 2015. Owners may contact peterbilt customer service at 1-940-591-4000. Paccar's number for this recall is 215-d.
  owners may also contact the national highway traffic safety administration vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to www.Safercar.Gov.

  Show Content

• Recall 76729 [USA]: If the fast idle control function is engaged with the transmission in gear, the vehicle could unexpectedly accelerate and override the parking brake and , creating a risk of a crash and damage to other vehicles or property and the potential for injury to nearby pedestrians.
  Paccar is recalling certain model year 2011-2012 kenworth t660, t700, and t800 vehicles manufactured from april 19, 2010, through may 13, 2011, and model year 2008, 2010, and 2011 peterbilt 365, 367, 384, 386, 387, 388 and 587 vehicles manufactured from april 20, 2010, through june 11, 2011, and equipped with paccar mx engines and eaton ultrashift dm or allison automatic transmissions (without auto-neutral). The fast idle control may be activated by the operator while the transmission is in gear.
  kenworth and peterbilt dealers will update the engine software for the affected chassis. This service will be performed free of charge. The safety recall began on august 22, 2011. Owners may contact kenworth at 1-425-828-5440 and peterbilt at 1-940-591-4196.
  kenworth and peterbilt safety recall no. E038r.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 80022 [USA]: The discharge of engine oil onto exhaust components which are hot, such as when the engine is under significant load, may cause a fire.
  Paccar is recalling certain model year 2008-2012 kenworth t2000, t660, t700, t800, and w900, as well as model year 2009-2012 peterbilt 365, 367, 384, 386, 387, 388, 389, and 587 trucks equipped with paccar mx engines. The oil module centrifugal spinner filter cap in the paccar mx engine may become loose, possibly allowing the cap to come off and engine oil to partially discharge from the oil module onto exhaust components.
  dealers will re-torque the oil module filter cap and install a secondary retention device on the secondary centrifugal spinner filter cap. This service will be performed free of charge. The safety recall is expected to begin during march 2011. Owners may contact kenworth at 1-425-828-5440 and peterbilt at 1-940-591-4196.
  owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 85245 [USA]: Detachment of the driveline from the axle may cause the vehicle to lose power and become disabled in the roadway. also, the driveline could drop from the vehicle into the roadway increasing the risk of a crash.
  Paccar is recalling certain model year 2007-2008 kenworth and peterbilt vehicles manufactured from february 2, 2006 through april 30, 2007. The bearing surfaces of the extended lube universal joint that attaches the inter-axle driveline to the drive axle may become prematurely worn due to breakdown of lubrication and/or excessive heat. Prematurely worn bearing surfaces may result in the u-joint becoming loose and/or binding. This condition may result in universal joint failure, allowing the inter-axle driveline to detach from the axle.
  paccar is working with its supplier to remedy the vehicles free of charge. The safety recall is expected to begin during february 2011. Owners may contact kenworth at 425-828-5440 and peterbilt at 940-591-4196.
  kenworth recall no. 10kwl & peterbilt recall no. 1201f.Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 86329 [USA]: A separation of the splined and non-splined tubes would cause a loss of steering control and increase the risk of a vehicle crash.
  Paccar is recalling certain model year 2008-2010 trucks equipped with trw steering shafts. The circumferential weld around the steering shaft tube that welds the splined tube to the non-splined tube may be mislocated. Mislocation of the circumferential weld may allow the splined tube and non-splined tube to rotate relative to one another during a low speed, high torque turn, possibly resulting in a separation of the two tubes.
  dealers will inspect the steering shaft using a weld placement gauge provided by trw. Any steering shaft found to have been welded improperly will be replaced free of charge. The safety recall began on july 30, 2010. Owners may contact kenworth at 425-828-5440 and peterbilt at 940-591-4196.
  kenworth's recall campaign number is 10kw-f & peterbilt recall no. 0610-d. Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 87755 [USA]: This may result in a fire hazard.
  Paccar is recalling 1098 kenworth my 2008 t800, w900, my 2008-2009 t2000 and peterbilt my 2007-2009 379 and 387 trucks equipped with c15 caterpillar diesel engines. The aftertreatment regeneration device (ard) may develop a hole and heat and flame may escape during a regeneration of the diesel particulate filter.
  paccar is working with caterpillar and will inspect and remedy the engines free of charge. Owners may contact caterpillar at 1-800-447-4986, kenworth at 425-828-5440 or peterbilt at 940-591-4196.
  kenworth recall no. 09kw1 & peterbilt recall no. 108a.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov .

  Show Content

• Recall 78694 [USA]: A vehicle crash could occur if another vehicle strikes the dpf on the roadway.
  Paccar is recalling 4,883 my 2006-2009 kenworth t600, t660, t800, w900, t2000 and my 2008-2009 peterbilt 365, 367, 379, 384, 386, 387, 388 and 389 trucks. Inadequate stiffness of the diesel particulate filter (dpf) bracket could result in separation of the dpf from the chassis.
  paccar is working with caterpillar to repair these vehicles (please see 08e041). Owners may contact caterpillar at 1-800-447-4986 or kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4196.
  kenworth recall no. 08kwd and peterbilt recall no. 908g.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 75323 [USA]: In the event of a crash, force could cause the rotor to crack and the door would not have primary or secondary closing security which could possibly lead to injury of the vehicle occupant.
  Paccar is recalling 6,169 my 2008 kenworth t300, t660, t800, t2000, w900 and c500 vehicles and my 2008-2009 peterbilt models 365, 367, 384, 387, 388, 389 and 389 kits. Certain door latch assemblies on these vehicles fail to conform to the requirements of federal motor vehicle safety standard no. 206, 'door locks and door retention components." the rotor in some of these door latch assemblies did not receive the proper heat treatment and may be soft.
  paccar is working with trimark and will inspect and replace the door latch if it is found to be defective. The recall began on march 14, 2008. Owners may contact kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4196.
  kenworth recall no. 08kw1 and peterbilt recall no. 108a.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 73306 [USA]: The diameter of the hose affects the fittings which may allow air to leak from the brakes and create the potential for a vehicle crash.
  Certain trucks equipped with eaton synflex eclipse brand extruded nylon air brake hose tubing fail to comply with the requirements of federal motor vehicle safety standard no. 106, "brake hoses." the tubing was manufactured with only four layers of nylon material, instead of the specified five layers.
  dealers will inspect the air brake hoses and, if necessary, replace the hoses. The recall began on february 22, 2008. Owner notification schedule for this campaign. Owners may contact kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4196.
  kenworth recall no. 07kwf and peterbilt recall no. 1207l.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 74443 [USA]: This type of damage may cause a "bind/stick" condition in the vehicle steering during a turn increasing the risk of a crash.
  On certain kenworth and peterbilt heavy duty trucks equipped with tas-85 trw steering gears, the inner surface of the outer sector shaft teeth of the steering gears may have an incorrect involute profile, which may lead to chipping and damage of the gearing system.
  dealers will repair and replace any suspect tas-85 steering gear assembly free of charge. The recall began on january 9, 2008. Owners may contact kenworth at 425-828-5440 and peterbilt at 940-591-4201.
  kenworth recall no. 07kwe, peterbilt 1107k.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 71724 [USA]: Fuel tanks possessing this defect could leak diesel fuel in the event of a crash.
  On certain peterbilt trucks, the longitudinal seams on the fuel tanks were fabricated using an incorrect weld speed for the given material thickness. This error resulted in a weld which did not completely penetrate the entire material thickness.
  dealers will inspect and replace any defective fuel tanks free of charge. The recall began on october 8, 2007. Owners may contact peterbilt at 940-591-4201.
  peterbilt recall no. 807j.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 46157 [USA]: If a fatigue failure occurs and is left unattended, the axle may lock up or the end of the axle could come off, which may result in a vehicle crash.
  On certain trucks, the axle housings may have been manufactured with steel that was out of specification which could result in a fatigue failure over time.
  dealers will inspect and replace the axles free of charge. The recall began on may 9, 2007. Owners may contact kenworth at 425-828-5440 and peterbilt at 1-940-591-4196.
  kenworth recall no. 07kw4 & peterbilt recall no. 107c.Customers may contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty: 1-800-424-9153); or go to http://www.Safercar.Gov.

  Show Content

• Recall 36036 [USA]: Failure could cause erratic vehicle handling which can cause a vehicle crash without warning.
  On some peterbilt trucks, certain parts used in the air suspensions have a high copper content causing premature failure.
  dealers will inspect and, when necessary, replace the defective parts. The recall began on january 17, 2007. Owners may contact peterbilt at 1-940-591-4196.
  paccar/peterbilt recall no. 1206d.Customers may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153), or go to http://www.Safercar.Gov.

  Show Content

• Recall 2020148 [Canada]: Lights and instruments
  Issue: on certain trucks, the warning light for the tractor anti-lock brake system (abs) may not turn on if the system loses power. If this happens, the driver will not get warning that the abs is not working properly. Note: this problem would also cause the traction control (tc) and electronic stability control (esc) lights not to turn on. Safety risk: if a driver is not warned that the abs is not working properly, there could be an increased risk of a crash. Corrective actions: paccar will notify owners by mail and instruct you to take your truck to a dealer to update the software for the cab control module (cecu).

  Show Content

• Recall 2015095 [Canada]: Label
  Certain vehicles fail to comply with the requirements of canada motor vehicle safety standard 120 - tire selection and rims. The tire information label may indicate incorrect tire pressure, understated by 5 psi, or a tire/rim/inflation pressure combination for which the maximum gawr is slightly below the gawr of the vehicle. Underinflated tires may not be capable of supporting the maximum load as reflected by the gawr and gvwr specified on the certification label, which could cause tire failure resulting in injury and/or damage to property. Correction: manufacturer will mail new tire and rims certification label.

  Show Content

• Recall 2011263 [Canada]: Powertrain
  On certain trucks equipped with a paccar mx engine and eaton ultrashift dm or allison automatic transmission (without auto-neutral), the fast idle control (also known as high idle) may be activated by the operator while the transmission is in gear. This could override the parking brake, allowing the vehicle to move unexpectedly. Unintended vehicle movement could result in a crash causing property damage and/or personal injury. Correction: dealers will update the engine control software.

  Show Content

• Recall 2011087 [Canada]: Engine
  On certain vehicles equipped with a paccar mx engine, the oil module centrifugal spinner filter cap may become loose, possibly allowing the cap to come off and engine oil to partially discharge from the oil module onto nearby exhaust components. The discharge of engine oil onto hot exhaust components could result in a fire causing property damage and/or personal injury. Correction: dealers will re-torque the oil module filter cap and install a secondary retention device on the secondary centrifugal spinner filter cap.

  Show Content

• Recall 2010441 [Canada]: Powertrain
  On certain vehicles, the bearing surfaces of the extended lube universal joint that attaches the inter-axle driveline to the drive axle may become prematurely worn due to breakdown of the lubrification and/or excessive heat. Prematurely worn bearing surfaces may result in the u-joint becoming loose and/or binding. If undetected, the condition may result in universal joint failure, allowing the inter-axle driveline to detach from the axle, which may cause the vehicle to become disabled in the roadway. Lost propulsion, in conjunction with traffic, road conditions, and the driver's reactions, could increase the risk of a crash. In addition a driveline component separating from the vehicle could strike another vehicle, stationary object, or bystander, causing property damage and/or personal injury. Correction: dealers will inspect and, if necessary, replace the interaxle driveline universal joint.

  Show Content

• Recall 2009013 [Canada]: Emissions
  On certain vehicles, the aftertreatment regeneration device (ard) may develop a hole allowing heat and flame to escape during a regeneration of the diesel particulate filter (dpf). This condition could result in a fire causing property damage and/or personal injury. Correction: dealers will affect repairs.

  Show Content

• Recall 2008001 [Canada]: Brakes
  Certain vehicles fail to comply with requirements of cmvss 121 - air brake system. The air lines were incorrectly constructed with only four layers of extruded nylon material, instead of the specified five layers. Should the air lines develop a leak, while the vehicle is in motion, it could cause the air brake system to fail, which would engage the rear spring brakes, slowing the vehicle to a stop, and preventing it from being driven. Correction: dealers will inspect and, if required, replace the air lines.

  Show Content

• Recall 2008018 [Canada]: Fuel supply
  On certain trucks, fuel line fittings on the aftertreatment regeneration device (ard) may crack and leak fuel during a regeneration of the diesel particulate filter. This could result in a vehicle fire. Correction: dealers will replace the fuel line with an updated version that has fittings able to accommodate higher tightening torque.

  Show Content

• Recall 2008047 [Canada]: Other
  On certain vehicles, the door latch may have been manufactured incorrectly. If the latch rotor cracks, the latch would not have primary or secondary closing security. Attempting to drive a vehicle with a door in the unlatched position can result in increased risk of injury to an unbelted front seat occupant. Correction: dealers will inspect and, if necessary, replace the latch assemblies.

  Show Content

• Recall 2008091 [Canada]: Brakes
  Certain vehicles may have been assembled with an incorrectly manufactured bendix mv-3 dash control valve. If the double check valve becomes lodged, in the event of a primary reservoir failure, air pressure can leak past the lodged valve, thereby depleting the secondary reservoir, causing a reduced ability for modulating the emergency brakes. Extended stopping distances may result in a vehicle crash, causing property damage, and/or personal injury or death. Correction: dealers will inspect and, if necessary, replace the dash control valve.

  Show Content

• Recall 2008348 [Canada]: Fuel supply
  On certain trucks equipped with a caterpillar c9 diesel engine, the fuel pump outlet check plug may crack and cause fuel to spray and leak from the fuel pump which may create a fire hazard. Correction: caterpillar dealers will replace the fuel pump plugs.

  Show Content

• Recall 2008349 [Canada]: Other
  On certain trucks, the inadequate stiffness of the diesel particulate filter (dpf) bracket could result in the separation of the dpf from the chassis, which could result in personal injuries or death to motorists or bystanders. Correction: caterpillar dealers will replace bracket as necessary.

  Show Content

• Recall 2007090 [Canada]: Other
  On certain trucks, the axle housing may have been manufactured with steel that was out of specification (9.5mm thick instead of 11mm thick), which could result in a fatigue failure over time. If failure occurs, the axle may lock-up or the end of the axle could come off, which may result in a vehicle crash with injury or death. Correction: dealers will inspect and, if required, replace the axles.

  Show Content

• Recall 2007292 [Canada]: Fuel supply
  On certain trucks, the fuel tank's longitudinal seams may have been fabricated using an incorrect weld speed for the given material thickness. This error resulted in a weld which did not completely penetrate the entire material thickness. Fuel tanks possessing this defect could leak diesel fuel in the event of a vehicle crash. A fuel leak, in the presence of an ignition source, could result in a fire. Correction: dealers will inspect and replace any defective fuel tank.

  Show Content

• Recall 2007415 [Canada]: Steering
  On certain trucks, an incorrectly manufactured steering gear sector shaft may cause the steering to "stick or bind". This could severely restrict the steering turning angle, possibly resulting in a vehicle crash with injury or death. Correction: dealers will replace the steering gear assembly.

  Show Content

• Recall 2006369 [Canada]: Suspension
  On certain trucks, components used to attach the air suspension to the axle may contain elevated amounts of copper. The elevated copper content could result in component failure, which could cause erratic vehicle handling and a crash. Correction: dealers will inspect and, if required, replace any suspect part with an updated version made with the correct metallurgical composition.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

• Driveshaft separates from tractor investigation # PE10029

  Summaryon july 13, 2010, the office of defects investigations (odi) opened an investigation on model year (my) 2007-2009 peterbilt tractors equipped with the (spl170xl extended lube inter-axle driveline).Odi opened this investigation based on one vehicle owners questionnaire (voq) and certain peterbilt field reports.During the course of the investigation, odi reviewed paccars ir (october 22, 2010) response with associated data related to warranty and complaint information, mined field data, interviewed customers and visited local dealers within the washington metropolitan area.Paccarconducted testing regarding torsional loading and identified various causative factors contributed to this safety defect finding.The defect is a consequence of the bearing surfaces of the spl170xl extended lube universal joint that attaches the inter-axle driveline to the drive axle becoming prematurely worn due to a breakdown of lubrication and/or excessive heat.Prematurely worn bearing surfaces may result in the u-joint becoming loose and/or binding.This condition may result in universal joint failure, allowing the inter-axle driveline to detach from the axle, which may cause the drive shaft to separate from the vehicle, increasing the risk of personal injury or property damage hazard.Odi learned that the affected population of the alleged defect extended to peer models within paccar.In summary, the following vehicles are being recalled: my 2007 and 2008 kenworth trucks, models t600, t660, t2000, t800 and w900 and my 2007/2008 peterbilt trucks, models357, 378, 379, 385, 386, 387, 388, and 389 allequipped with extended lube inter-axle drivelines manufactured by dana corporation.The recall affects vehicles manufactured between february 2, 2006 and april 30, 2007.At this time paccar has not yet identified a fix for the inner-axle safety defect and is currently conducting testing with the intent to provide a solution to the failure.Odi will monitor the development of paccars testing and ensure a timely repair for the consumer.This investigation is closed.
  

  Show Content

• Horton fan hub failures investigation # EA09008

  Paccar is conducting an owner notification program (onp) for select vehicles within the subject and peer populations.The onp are attached to the closing report and can be found in the nhtsa technical service bulletin (tsb) database. (tsb: 10033585, 10033584)see closing report for investigation details.
  

  Show Content

• Horton fan hub failures investigation # PE09002

  There are 84,573 subject and peer (kenworth) vehicles.Subject vehicles are model year 2007 through 2008 paccar trucks built with a horton fan hub assembly.The ea will include peer vehicles (kenworths with horton fan hubs) in the subject population.There are a total of 1,645 warranty claims on the combined population.Odi surveyed warranty claim owners and found that a significant number of the failures resulted in a disabled vehicle.Odi also believes that certain models are more prone to failure and further analysis is warranted to understand the differences in failure rates. Odi is concerned that a large disabled vehicle is at an increased risk of being struck in the rear by another vehicle.Odi is also concerned that this failure mode provides little warning and therefore, a driver has less opportunity to remove the vehicle from the travel lanes or shoulder, once a fan separation has occurred.Odi will conduct further risk assessment during the ea to gain an understanding of the warning, options available to the driver and the increased risk of the truck being struck in the event of a breakdown.Nhtsa has upgraded pe09-002 to an ea (ea09-008) to further investigate this matter.
  

  Show Content

Before the above truck was purchased, of note is that the check engine light was on, as well as after the purchase of same truck. Fussell truck sales reset the engine light on wednesday, september 23, 2015. I placed vehicle on a diagnostic computer on today, september 29th, 2015, and was notified that the check engine light that was on due to a need to underlying need for a faulty transmission and regent system , which does not resolve the root cause of the problem. The truck was purchased on september 2, 2015, and has a 30-day warranty, and i am exercising my rights to surrender the aboved mentioned vehicle as unsafe and a danger to public health. This truck does not comply with national highway traffic safety regulations.

First, my turbo went out june24th 2014. Second the d.P.F filter and sensors. I only had the truck for 90days and already spent over 9000 dollars on it. *js

Tl* the contact owns a 2008 peterbilt 387. While driving various speeds, the dpf malfunctioned and caused the engine to overheat and the vehicle to stall. No further information was available. The contact indicated that the vehicle experienced the failure on multiple occasions and had been serviced multiple times. The entire dpf system was replaced, but the failure persisted. The manufacturer was notified of the failure. The vin was not available. The failure mileage was 300,000.

Tl*the contact owns a 2008 peterbilt 387. The contact stated that the dps injectors would not regenerate on the vehicle. As a consequence, the vehicle would sporadically decelerate. The check engine indicator would illuminate when the failure occurred. The vehicle has been taken to the dealer on numerous occasions and they stated that the diesel engine was the cause of the failure. She received a recall notice for nhtsa campaign id number 09v019000(engine and engine cooling:engine:diesel) and is currently waiting on a response from the dealer. The failure mileage was 80,000 and current mileage was 116,000.