2007 PETERBILT 388Peterbilt 388 2007

Vehicle Details: Recalls, Investigations, Decoded VIN Details, Service Bulletins

Below you will find all available information on the 2007 PETERBILT 388, manufacturered by Peterbilt Motors Company.
The vehicle is described as a 6x4 Truck-tractor (Cab only, or with any number of trailing unit; any weight).

ManufacturerKnown WMI(s)Fuel Type
PETERBILT3WP Diesel
PETERBILT VIN Decoder

Use the box here to look up VINs from PETERBILT as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2007 PETERBILT 388 produced?
     - The 2007 PETERBILT 388 is produced in Denton Tx, United States (usa).
  • Are there recalls for the 2007 PETERBILT 388?
     - There are 12 recall(s) for the 2007 PETERBILT 388, additional information is below.
NHTSA Mandated Recalls
  • Recall 117182 [USA]: If the tires are underinflated due to the incorrect inflation pressure listed on the label, the truck may not be able to carry the maximum gross vehicle weight rating (gvwr) load listed without experiencing tire failure which would increase the risk of a crash.

  • Recall 101240 [USA]: As a result, the axles may be overloaded or the wrong tires could be installed or the tires could be improperly inflated. all of these issues increase the risk of a crash.

  • Recall 80048 [USA]: The discharge of engine oil onto exhaust components which are hot, such as when the engine is under significant load, may cause a fire.

  • Recall 85257 [USA]: Detachment of the driveline from the axle may cause the vehicle to lose power and become disabled in the roadway. also, the driveline could drop from the vehicle into the roadway increasing the risk of a crash.

  • Recall 74942 [USA]: This reduction of fatigue strength could cause the pivot pin to crack and eventually break, causing the trailer to detach from the truck while in motion, which could cause a crash that could result in personal injury or death.

  • Recall 46150 [USA]: If a fatigue failure occurs and is left unattended, the axle may lock up or the end of the axle could come off, which may result in a vehicle crash.

  • Recall 36025 [USA]: Failure could cause erratic vehicle handling which can cause a vehicle crash without warning.

  • Recall 2015095 [Canada]: Label

  • Recall 2011087 [Canada]: Engine

  • Recall 2010441 [Canada]: Powertrain

  • Recall 2007090 [Canada]: Other

  • Recall 2006369 [Canada]: Suspension

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 02-160 - EQUIPMENT ADAPTIVE/MOBILITY: Information only a?? Windshield washer pumps have a high no trouble found rate. Washer pumps may fail to spray due to a clogged filter.
  • 32-015 - ELECTRICAL SYSTEM: Information only: this bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplet
  • 43-067 - STRUCTURE: Fix as fail: for all conventional models, except 387/587, equipped with side-of-cab (a??Soca??) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the soc exhaust stacks may not be tightened properly. This may allow the
  • 11-001 - POWER TRAIN: Information only: hendrickson softek front axle maintenance intervals and requirements.
  • 34-085 - VEHICLE SPEED CONTROL: Information only a?? Vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
  • 32-016 - EQUIPMENT: Information only: proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
  • 34-085 - ELECTRICAL SYSTEM: Information only: vehicles may have the connector seal on the wheel speed sensor incorrectly installed, which may lead to sensor corrosion.
  • 01-075 - ENGINE AND ENGINE COOLING: Information only: this bulletin provides guidance for repairing an air-conditioning system after internal failure of the a/c compressor.
  • 34-066 - ELECTRICAL SYSTEM: Information only - quick reference guide for electric harness damage repairs.
  • 34-077 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Information only: proper instructions for closure of power distribution box cover to prevent corrosion.
  • 13-049 - ELECTRICAL SYSTEM:SOFTWARE: Information: bendix acom software version 6.16.5.0 for diagnostics may introduce an unrecoverable error. Notice to dealers to replace this version with older software version until bendix introduces new version.
  • 03-064 - ELECTRICAL SYSTEM: Information - recommended practices for updating esa software
  • 8110 - ENGINE AND ENGINE COOLING:ENGINE: Cummins isx, or cummins ism engines experiencing a premature failure of the fan hub bearings. *kb
  • FRN-808-1 - ELECTRICAL SYSTEM: Peterbilt trucks: the electrical system may shut down due to a power surge. When this occurs, the green light on the comfortclass control panel turns to red. *pe
Known Recall Investigations
  • Driveshaft separates from tractor investigation # PE10029

    Summaryon july 13, 2010, the office of defects investigations (odi) opened an investigation on model year (my) 2007-2009 peterbilt tractors equipped with the (spl170xl extended lube inter-axle driveline).Odi opened this investigation based on one vehicle owners questionnaire (voq) and certain peterbilt field reports.During the course of the investigation, odi reviewed paccars ir (october 22, 2010) response with associated data related to warranty and complaint information, mined field data, interviewed customers and visited local dealers within the washington metropolitan area.Paccarconducted testing regarding torsional loading and identified various causative factors contributed to this safety defect finding.The defect is a consequence of the bearing surfaces of the spl170xl extended lube universal joint that attaches the inter-axle driveline to the drive axle becoming prematurely worn due to a breakdown of lubrication and/or excessive heat.Prematurely worn bearing surfaces may result in the u-joint becoming loose and/or binding.This condition may result in universal joint failure, allowing the inter-axle driveline to detach from the axle, which may cause the drive shaft to separate from the vehicle, increasing the risk of personal injury or property damage hazard.Odi learned that the affected population of the alleged defect extended to peer models within paccar.In summary, the following vehicles are being recalled: my 2007 and 2008 kenworth trucks, models t600, t660, t2000, t800 and w900 and my 2007/2008 peterbilt trucks, models357, 378, 379, 385, 386, 387, 388, and 389 allequipped with extended lube inter-axle drivelines manufactured by dana corporation.The recall affects vehicles manufactured between february 2, 2006 and april 30, 2007.At this time paccar has not yet identified a fix for the inner-axle safety defect and is currently conducting testing with the intent to provide a solution to the failure.Odi will monitor the development of paccars testing and ensure a timely repair for the consumer.This investigation is closed.

  • Horton fan hub failures investigation # PE09002

    There are 84,573 subject and peer (kenworth) vehicles.Subject vehicles are model year 2007 through 2008 paccar trucks built with a horton fan hub assembly.The ea will include peer vehicles (kenworths with horton fan hubs) in the subject population.There are a total of 1,645 warranty claims on the combined population.Odi surveyed warranty claim owners and found that a significant number of the failures resulted in a disabled vehicle.Odi also believes that certain models are more prone to failure and further analysis is warranted to understand the differences in failure rates. Odi is concerned that a large disabled vehicle is at an increased risk of being struck in the rear by another vehicle.Odi is also concerned that this failure mode provides little warning and therefore, a driver has less opportunity to remove the vehicle from the travel lanes or shoulder, once a fan separation has occurred.Odi will conduct further risk assessment during the ea to gain an understanding of the warning, options available to the driver and the increased risk of the truck being struck in the event of a breakdown.Nhtsa has upgraded pe09-002 to an ea (ea09-008) to further investigate this matter.

NHTSA decoded information from VIN

1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.

Variable Value
Additional Error TextThe error positions are indicated by ! in Suggested VIN. In the Possible values section, each pair of parenthesis indicate information about each error position in VIN . The Numeric value before the : indicates the position in error and the values after the : indicate the possible values that are allowed in this position Unused position(s): 7,8,11;
Body ClassTruck-Tractor
DisplacementCC15000
DisplacementCI915.3561614209
DisplacementL15
Drive Type6x4
Engine ConfigurationIn-Line
Engine Cylinders6
Engine ManufacturerCummins
Engine ModelISX
Error Code5,14
Error Text5 - VIN has errors in few positions; 14 - Unable to provide information for some of the characters in the VIN, based on the manufacturer submission.
Fuel Type PrimaryDiesel
MakePETERBILT
MakeID495
ManufacturerPETERBILT MOTORS COMPANY
Manufacturer Id1033
Model388
ModelID2793
Model Year2007
NCSA Body TypeTruck-tractor (Cab only, or with any number of trailing unit; any weight)
NCSA MakePeterbilt
NCSA ModelMedium/Heavy - CBE
Possible Values(7:056789EGT)(8:ABGHX)(11:DFKLMNPS)
SuggestedVIN1XPWD4!!67!D17323
VIN1XPWD44967CD17323
Vehicle Descriptor1XPWD449*7C
Vehicle TypeTRUCK
Latest VINs Decoded for this Manufacturer
VIN Year Model Manufactured In
1XPWD449X7CD173232007388 ,
1XPWD44967CD173232007388 ,

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.