2013 PETERBILT 388Peterbilt 388 2013

Vehicle Details: Recalls, Decoded VIN Details, Service Bulletins

Below you will find all available information on the 2013 PETERBILT 388, manufacturered by Peterbilt Motors Company.
The vehicle is described as a 6x4 Single-unit straight truck or Cab-Chassis (GVWR greater than 26,000 lbs.).

ManufacturerKnown WMI(s)Fuel Type
PETERBILT3WP Diesel
PETERBILT VIN Decoder

Use the box here to look up VINs from PETERBILT as well as other manufacturers

#
Frequently Asked Questions
  • Where is the 2013 PETERBILT 388 produced?
     - The 2013 PETERBILT 388 is produced in Denton Texas, United States (usa).
  • Are there recalls for the 2013 PETERBILT 388?
     - There are 18 recall(s) for the 2013 PETERBILT 388, additional information is below.
  • What is the GVWR of a 2013 PETERBILT 388?
     - The 2013 PETERBILT 388 has a GVWR of Class 8: 33,001 lb and above (14,969 kg and above) lbs.
NHTSA Mandated Recalls
  • Recall 146490 [USA]: If the driver unknowingly operates the vehicle without the abs functioning, there would be an increased risk of a crash.

  • Recall 105908 [USA]: Higher vehicle speeds and other factors such as tire load and road temperatures may result in premature tire failure, increasing the risk of a crash.

  • Recall 117983 [USA]: If the alternator cable rubs through its insulation, an electrical short may occur, increasing the risk of a fire.

  • Recall 117254 [USA]: If the tires are underinflated due to the incorrect inflation pressure listed on the label, the truck may not be able to carry the maximum gross vehicle weight rating (gvwr) load listed without experiencing tire failure which would increase the risk of a crash.

  • Recall 109476 [USA]: Undertorqued tie rod end clamp bolts are susceptible to corrosion, which may cause loose bolts to separate resulting in a loss of vehicle control and an increased risk of a crash.

  • Recall 104281 [USA]: Without a warning of a problem existing in the side air bag system, the driver may continue to operate the vehicle, increasing the risk of injury from the side air bag not deploying in the event of a rollover.

  • Recall 102495 [USA]: The improper brake configuration could lengthen the braking distance needed to stop the vehicle, increasing the risk of a crash.

  • Recall 101259 [USA]: As a result, the axles may be overloaded or the wrong tires could be installed or the tires could be improperly inflated. all of these issues increase the risk of a crash.

  • Recall 95958 [USA]: Unexpected continuous brake application can cause the brakes to overheat and lead to a fire. unexpected continuous brake application can cause the driver to lose control of the vehicle, increasing the risk of a crash. also, the brakes may be applied without illuminating the brake lights, failing to give proper warning to other drivers.

  • Recall 2020148 [Canada]: Lights and instruments

  • Recall 2015532 [Canada]: Tires

  • Recall 2015531 [Canada]: Tires

  • Recall 2015317 [Canada]: Electrical

  • Recall 2015095 [Canada]: Label

  • Recall 2015078 [Canada]: Steering

  • Recall 2014198 [Canada]: Airbag

  • Recall 2014094 [Canada]: Brakes

  • Recall 2012027 [Canada]: Brakes

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.

Bulletins

Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.

  • 02-160 - EQUIPMENT ADAPTIVE/MOBILITY: Information only a?? Windshield washer pumps have a high no trouble found rate. Washer pumps may fail to spray due to a clogged filter.
  • 02-158 - STRUCTURE: Fix as fail: peterbilt has determined that certain model 348, 365, 367, 382, 384, 386, 388, 389, 567, 579, and 587 trucks, built between 4/13/2010 and 3/16/2020 and equipped with a flush mounted battery box, utilized rubber washers that co
  • 32-015 - ELECTRICAL SYSTEM: Information only: this bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplet
  • 43-067 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Fix as fail: for all conventional models, except 387/587, equipped with side-of-cab (⿿soc⿝) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the soc exhaust stacks may not be tightened properly. This may allow the
  • 11-001 - POWER TRAIN: Information only: hendrickson softek front axle maintenance intervals and requirements.
  • 34-085 - VEHICLE SPEED CONTROL: Information only a?? Vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
  • 32-016 - EQUIPMENT: Information only: proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
  • 34-085 - ELECTRICAL SYSTEM: Information only: vehicles may have the connector seal on the wheel speed sensor incorrectly installed, which may lead to sensor corrosion.
  • 03-071 - ELECTRICAL SYSTEM:SOFTWARE: Information only - vehicles built with namux software from 2013 to present may experience accuracy issues with the tachometer. The issue can be temporarily resolved using any one of the included procedures.
  • 01-075 - ENGINE AND ENGINE COOLING: Information only: this bulletin provides guidance for repairing an air-conditioning system after internal failure of the a/c compressor.
  • 16-041 - SUSPENSION: Non safety campaign: peterbilt has determined that certain model 365, 384, 386, 388, 389, 3895, 587 and 579 vehicles built between march 27, 2012 and january 20, 2019 with flex air suspension in a 6x2 configuration have u-bolts that may fa
  • TIB43-062 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Information only â¿¿ this bulletin provides information about the california air resources board (carb) periodic smoke inspection program (psip) and heavy duty vehicle inspection program (hdvip).
  • 42-058 - ENGINE AND ENGINE COOLING: Fix-as-fail: two separate causes have been identified as root cause of intermittent low coolant indicator illumination.
  • 34-066 - ELECTRICAL SYSTEM: Information only - quick reference guide for electric harness damage repairs.
  • 34-077 - EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL : Information only: proper instructions for closure of power distribution box cover to prevent corrosion.
  • 13-049 - ELECTRICAL SYSTEM:SOFTWARE: Information: bendix acom software version 6.16.5.0 for diagnostics may introduce an unrecoverable error. Notice to dealers to replace this version with older software version until bendix introduces new version.
  • 03-064 - ELECTRICAL SYSTEM: Information - recommended practices for updating esa software
  • SB-E-097 - ENGINE (PWS): Peterbilt: the malfunction indicator lamp (mil) illuminates due to an engine control unit (ecu) software issue, rear nox sensor, operating correctly. *pe
NHTSA decoded information from VIN

139 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.

Variable Value
Body ClassTruck
Brake System TypeAir
DisplacementCC15000
DisplacementCI915.3561614209
DisplacementL15
Drive Type6x4
Engine ConfigurationIn-Line
Engine Cylinders6
Engine ModelCummins ISX
Error Text0 - VIN decoded clean. Check Digit (9th position) is correct
Fuel Type PrimaryDiesel
GVWRClass 8: 33,001 lb and above (14,969 kg and above)
MakePETERBILT
MakeID495
ManufacturerPETERBILT MOTORS COMPANY
Manufacturer Id1033
Model388
ModelID2793
Model Year2013
NCSA Body TypeSingle-unit straight truck or Cab-Chassis (GVWR greater than 26,000 lbs.)
NCSA MakePeterbilt
NCSA ModelMedium/Heavy - CBE
Plant CityDENTON
Plant Company NamePeterbilt
Plant CountryUNITED STATES (USA)
Plant StateTEXAS
VIN1NPWL49X2DD189895
Vehicle TypeINCOMPLETE VEHICLE
Vehicle Documentation
[pdf] User Manual Owner's Manual Reference Guide Specifications Dimension Guide Guide Application Guide
2014 Cat® Batteries Cross Reference Guide Users should consult the most current edition of this application guide and their owner s manual The marketer manufacturer expressly deny any responsibility for CM20161005 25267 29155 caterpillar scene7 is content Caterpillar
2015 Cat Batteries Cross Reference Guide Table of Contents Section Page General Information.... ... fuse 2009-08 320, 367, 386 2006-01 378 Class 8 Truck 2013 320, 320 Hybrid, 367 2013 365, 384, 386, 388 2013 389, 587 2012 320, 367, 389, 587 2012 337, 365, 384, 386 31T 650 173 31T 650 173; 215 31T ...
lang:en score:30 filesize: 26.47 M page_count: 373 document date: 2015-09-25
Latest VINs Decoded for this Manufacturer
VIN Year Model Manufactured In
1NPWL49X2DD1898952013388DENTON TEXAS, UNITED STATES (USA)
1XPWD40X7DD1865722013388DENTON TEXAS, UNITED STATES (USA)
1XPWDW9X0DD1732082013388DENTON TEXAS, UNITED STATES (USA)
1XPWD49X5DD2027692013388DENTON TEXAS, UNITED STATES (USA)
1XPWD49X4DD1848462013388DENTON TEXAS, UNITED STATES (USA)
1NPWL40X6DD1853592013388DENTON TEXAS, UNITED STATES (USA)
1XPWDW9X2DD1687542013388DENTON TEXAS, UNITED STATES (USA)
1NPWL40X2DD1853122013388DENTON TEXAS, UNITED STATES (USA)
1XPWD49X1DD1625622013388DENTON TEXAS, UNITED STATES (USA)
1XPWD79X1DD2000962013388DENTON TEXAS, UNITED STATES (USA)
1NPWD49X1DD2103282013388DENTON TEXAS, UNITED STATES (USA)
1XPWD49XXDD2102672013388DENTON TEXAS, UNITED STATES (USA)
1XPWD49X5DD2102732013388DENTON TEXAS, UNITED STATES (USA)
1XPWDP0X5DD1694022013388DENTON TEXAS, UNITED STATES (USA)
1XPWD49X7DD2022242013388DENTON TEXAS, UNITED STATES (USA)
1XPWD40X9DD1763182013388DENTON TEXAS, UNITED STATES (USA)
1XPWD49X9DD1987262013388DENTON TEXAS, UNITED STATES (USA)
1XPWD49XXD7949252013388 ,
1XPWAP7X8DD1943732013388DENTON TEXAS, UNITED STATES (USA)
1XPWDP0X6DD1694082013388DENTON TEXAS, UNITED STATES (USA)
1NPWL40X0DD1853872013388DENTON TEXAS, UNITED STATES (USA)
1NPWL49X1DD1898862013388DENTON TEXAS, UNITED STATES (USA)
1NPWL49X5DD1958532013388DENTON TEXAS, UNITED STATES (USA)
1XPWD49X5DD2073422013388DENTON TEXAS, UNITED STATES (USA)

© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.