Peterbilt 587 2007
Vehicle Details: Recalls, Decoded VIN Details, Service Bulletins
Use the box here to look up VINs from PETERBILT as well as other manufacturers
-
Where is the 2007 PETERBILT 587 produced?
- The 2007 PETERBILT 587 is produced in Madison Tennessee, United States (usa).
-
Are there recalls for the 2007 PETERBILT 587?
- There are 4 recall(s) for the 2007 PETERBILT 587, additional information is below.
-
What is the GVWR of a 2007 PETERBILT 587?
- The 2007 PETERBILT 587 has a GVWR of Class 8: 33,001 lb and above (14,969 kg and above) lbs.
Recall 117224 [USA]: If the tires are underinflated due to the incorrect inflation pressure listed on the label, the truck may not be able to carry the maximum gross vehicle weight rating (gvwr) load listed without experiencing tire failure which would increase the risk of a crash.
Recall 80089 [USA]: The discharge of engine oil onto exhaust components which are hot, such as when the engine is under significant load, may cause a fire.
Recall 2015095 [Canada]: Label
Recall 2011087 [Canada]: Engine
To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.
Bulletins are notices put out by manufacturers in conjunction with the NHTSA to notify the public of manufacturing issues or changes.
- 02-160 - EQUIPMENT ADAPTIVE/MOBILITY: Information only a?? Windshield washer pumps have a high no trouble found rate. Washer pumps may fail to spray due to a clogged filter.
- 116-1 - EQUIPMENT: Smartnav 2.0 hardware retrofit for quality validation and vehicle validation units.
- 32-015 - ELECTRICAL SYSTEM: Information only: this bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplet
- 43-067 - STRUCTURE: Fix as fail: for all conventional models, except 387/587, equipped with side-of-cab (soc) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the soc exhaust stacks may not be tightened properly. This may allow the
- 11-001 - POWER TRAIN: Information only: hendrickson softek front axle maintenance intervals and requirements.
- 34-085 - ELECTRICAL SYSTEM: Information only vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
- 32-016 - EQUIPMENT: Information only: proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
- 34-085 - ELECTRICAL SYSTEM: Information only: vehicles may have the connector seal on the wheel speed sensor incorrectly installed, which may lead to sensor corrosion.
- 01-075 - ENGINE AND ENGINE COOLING: Information only: this bulletin provides guidance for repairing an air-conditioning system after internal failure of the a/c compressor.
- 34-066 - ELECTRICAL SYSTEM: Information only - quick reference guide for electric harness damage repairs.
- 34-077 - EQUIPMENT:ELECTRICAL: Information only: proper instructions for closure of power distribution box cover to prevent corrosion.
- 13-049 - ELECTRICAL SYSTEM:SOFTWARE: Information: bendix acom software version 6.16.5.0 for diagnostics may introduce an unrecoverable error. Notice to dealers to replace this version with older software version until bendix introduces new version.
- 03-064 - ELECTRICAL SYSTEM: Information - recommended practices for updating esa software
- 15-16 - ENGINE AND ENGINE COOLING:EXHAUST SYSTEM: Fix-as-fail: repair for horizontal exhaust diffuser configurations with broken brackets or cracked diffuser.
1 Results returned successfully. NOTE: Any missing decoded values should be interpreted as NHTSA does not have data on the specific variable. Missing value should NOT be interpreted as an indication that a feature or technology is unavailable for a vehicle.
Variable | Value |
---|---|
Body Cab Type | MDHD: Conventional |
Body Class | Truck |
Brake System Type | Air |
Drive Type | 6x4 |
Engine Manufacturer | Caterpillar |
Engine Model | 3306/C15/C16 |
Error Text | 0 - VIN decoded clean. Check Digit (9th position) is correct |
GVWR | Class 8: 33,001 lb and above (14,969 kg and above) |
Make | PETERBILT |
MakeID | 495 |
Manufacturer | PETERBILT MOTORS COMPANY |
Manufacturer Id | 1033 |
Model | 587 |
ModelID | 2799 |
Model Year | 2007 |
NCSA Body Type | Single-unit straight truck or Cab-Chassis (GVWR greater than 26,000 lbs.) |
NCSA Make | Peterbilt |
NCSA Model | Medium/Heavy - CBE |
Plant City | MADISON |
Plant Company Name | Peterbilt |
Plant Country | UNITED STATES (USA) |
Plant State | TENNESSEE |
VIN | 1NP4LB9X17N657657 |
Vehicle Descriptor | 1NP4LB9X*7N |
Vehicle Type | INCOMPLETE VEHICLE |
VIN | Year | Model | Manufactured In |
---|---|---|---|
1XP4D49X07D636758 | 2007 | 587 | DENTON TEXAS, UNITED STATES (USA) |
1XP4DB9X17D680823 | 2007 | 587 | DENTON TEXAS, UNITED STATES (USA) |
1XP4DB9X77D680823 | 2007 | 587 | DENTON TEXAS, UNITED STATES (USA) |
1NP4LB9X67N657657 | 2007 | 587 | MADISON TENNESSEE, UNITED STATES (USA) |
1NP4LB9X17N657657 | 2007 | 587 | MADISON TENNESSEE, UNITED STATES (USA) |