Polaris Rzr 2019

• Recall RSPV/2021/004 [UK]: Vehicles could have been assembled with incorrect front suspension spring retainers
  Vehicles could have been assembled with incorrect front suspension spring retainers.
  inspect and replace the front suspension spring retainers if necessary.

  Show Content

• Recall RSPV/2020/012 [UK]: Certain immi 4 point and 6 point seat belt harnesses may have been manufactured with missing belt stitching
  Certain 4-point and 6-point seat belt harnesses may have been manufactured with missing belt stitching.
  check and replace the belt assembly if required.

  Show Content

• Recall RSPV/2020/022 [UK]: Risk of primary drive clutch failure
  Some 2020-2021 rzr models may have an increased risk of primary (drive) clutch failure
  inspect the and replace the primary clutch if necessary.

  Show Content

• Recall RSPV/2020/012 [UK]: Certain immi 4 point and 6 point seat belt harnesses may have been manufactured with missing belt stitching
  Certain 4-point and 6-point seat belt harnesses may have been manufactured with missing belt stitching.
  check and replace the belt assembly if required.

  Show Content

• Recall 2020331 [Canada]: Seats and restraints
  Issue: certain 4-point and 6-point harnesses (seat belts) may be missing stitching at the attachment points. As a result, the harness may not properly restrain a person in a crash. Note: this problem affects 4-point and 6-point harnesses that were factory installed, as well as aftermarket "subzero" 4-point and "click-6" 6-point seat belt harness kits sold through polaris dealers or polaris.Com. Safety risk: a harness that does not work properly could increase the risk of injury in a crash. Corrective actions: if you purchased a vehicle with a potentially affected harness or purchased a potentially affected harness directly from polaris, polaris will notify you by mail and instruct you to take your vehicle to a dealer to inspect the harness stitching. If stitching is missing, the harness(es) will be replaced. Polaris advises you not operate your side-by-side utv until the harnesses have been inspected. If you purchased a harness directly from a polaris dealer, please contact them for further information.

  Show Content

• Recall 2019277 [Canada]: Powertrain
  Issue: on certain side-by-side utv’s, the covers for the clutch inlet ducts may not have been removed. These covers are used to prevent debris from entering the clutch during manufacturing and shipping and should have been removed prior to sale and use. If the clutch inlet duct covers are not removed, there would be no flow of air to the clutch and it could overheat. Safety risk: a clutch that overheats could result in a loss of power to the driving wheels and create the risk of a fire. Corrective actions: the company will notify owners by mail and instruct them to take their vehicle to a dealer to inspect if the covers are present. If the covers are found, they will be removed and the dealer will inspect and replace the clutch belt as necessary.

  Show Content

• Recall 2020331 [Canada]: Seats and restraints
  Issue: certain 4-point and 6-point harnesses (seat belts) may be missing stitching at the attachment points. As a result, the harness may not properly restrain a person in a crash. Note: this problem affects 4-point and 6-point harnesses that were factory installed, as well as aftermarket "subzero" 4-point and "click-6" 6-point seat belt harness kits sold through polaris dealers or polaris.Com. Safety risk: a harness that does not work properly could increase the risk of injury in a crash. Corrective actions: if you purchased a vehicle with a potentially affected harness or purchased a potentially affected harness directly from polaris, polaris will notify you by mail and instruct you to take your vehicle to a dealer to inspect the harness stitching. If stitching is missing, the harness(es) will be replaced. Polaris advises you not operate your side-by-side utv until the harnesses have been inspected. If you purchased a harness directly from a polaris dealer, please contact them for further information.

  Show Content

• Recall 2019009 [Canada]: Brakes
  Issue: certain side-by-side vehicles have a problem with the front brakes. A brake pad clip could cause binding of the brake pads. This could cause a reduction in braking. Safety risk: reduced brake performance could cause extended stopping distances and increase the risk of a crash. Corrective action: the company will notify owners by mail. Owners should stop use of their vehicle until recall repairs are performed. Owners will be instructed to take their vehicle to a dealer to have the upper brake pad clip removed from each front brake caliper bracket.

  Show Content

To ensure accuracy and for your safety, it is recommended to do a free VIN recall check here or here [USA] - UK - Canada.