TSB-12-26-001

Service Bulletin Details

Public Details for: TSB-12-26-001

Mitsubishi: while in production, front axle nut was changed from castellated type to flanged type with staked collar. *pe


- 2011 - 2009 -

Page 1 of 22
SB-10044479-5227
Technical Service Bulletin
SUBJECT:
FRONT AXLE NUT CHANGED −
SERVICE MANUAL REVISION − REVISED
No:
TSB−12−26−001
DATE:
June, 2012
MODEL:
See below
CIRCULATE TO:
[ ] GENERAL MANAGER
[ X ] PARTS MANAGER
[ X ] TECHNICIAN
[ X ] SERVICE ADVISOR
[ X ] SERVICE MANAGER
[ ] WARRANTY PROCESSOR
[ ] SALES MANAGER
This bulletin supercedes TSB−11−26−002, issued July, 2011, to revise the order certain steps are
performed. Changes are italicized and indicated by A .
TSB Revision: TSB−12−26−001
PURPOSE
The front axle nut has been changed in production from castellated type to flanged type with a staked
collar. This TSB contains new service manual procedures for vehicles related to this change.
Details:
D
Front drive shaft (split pin hole at ends → groove (keyway) in threads)
D
Front drive shaft nuts (castellated nuts → staked nuts)
D
Tightening torque for staked nuts (144 − 176 Nm → 270 + 27 Nm)
AFFECTED VEHICLES
2011
2011
2011
2011
2011
Lancer (built from the end of September, 2010)
Lancer Ralliart (built from the start of October, 2010)
Lancer Sportback (built from the end of September, 2010)
Lancer Sportback Ralliart (built from the start of October, 2010)
Lancer Evolution (built from the start of October, 2010)
AFFECTED SERVICE MANUALS
2011 Lancer/Lancer Sportback: Group 26−Front Axle
2011 Lancer Evolution: Group 26−Front Axle
(continued)
Copyright 2011 Mitsubishi Motors North America, Inc.
(3870)
The information contained in this bulletin is subject to change. For the latest version of this document, go to the Mitsubishi Dealer Link,
MEDIC, or the Mitsubishi Service Information website (www.mitsubishitechinfo.com).
Page 2 of 22
TSB−12−26−001
2011 Lancer, 2011 Lancer Sportback, 2011 Lancer Evolution: Add the following information to the
Special Tools section in Group 26 − Front Axle.

MB992700
Lock nut chisel
General service
tool
Raising up the
swagged part driveshaft nut
2011 Lancer, Lancer Sportback, page 26−12


"

Page 3 of 22
TSB−12−26−001
2011 Lancer, Lancer Sportback, page 26−13

"


From page 4
Page 4 of 22
TSB−12−26−001
Insert the following where indicated on page 26−13.
Page 5 of 22
TSB−12−26−001
2011 Lancer, Lancer Sportback, page 26−15

"

B

X WASHER (w/CASTELLATED NUT ONLY)/DRIVESHAFT
 >>A<<
NUT INSTALLATION

From page 6

Page 6 of 22
TSB−12−26−001
Insert the following where indicated on page 26−15.


Page 7 of 22
TSB−12−26−001
2011 Lancer, Lancer Sportback, page 26−22

Page 8 of 22
TSB−12−26−001
2011 Lancer, Lancer Sportback, page 26−23



Page 9 of 22
TSB−12−26−001
2011 Lancer, Lancer Sportback, page 26−24


From page 10
Page 10 of 22
TSB−12−26−001
Insert the following where indicated on page 26−24.


Page 11 of 22
TSB−12−26−001
2011 Lancer, Lancer Sportback, page 26−25

>>A<< WASHER (w/CASTELLATED NUT ONLY)/DRIVESHAFT
NUT INSTALLATION


Insert the information from page 12.
Page 12 of 22
TSB−12−26−001
Insert the following where indicated on page 26−25.


Page 13 of 22
TSB−12−26−001
2011 Lancer Evolution page 26−10

"

Page 14 of 22
TSB−12−26−001
2011 Lancer Evolution page 26−11

"

Insert the information page 15.
Page 15 of 22
TSB−12−26−001
Insert the following where indicated on page 26−11.


Page 16 of 22
TSB−12−26−001
2011 Lancer Evolution page 26−13
X



C


>>B<<
X WASHER (w/CASTELLATED NUT ONLY)/DRIVESHAFT
NUT INSTALLATION

Insert the information from page 17.
"
B
"

Page 17 of 22
TSB−12−26−001
Insert the following where indicated on page 26−13.


Page 18 of 22
TSB−12−26−001
2011 Lancer Evolution page 26−16



Page 19 of 22
TSB−12−26−001
2011 Lancer Evolution page 26−17


Insert the attachment from page 20
Page 20 of 22
TSB−12−26−001
Insert the following where indicated on page 26−17.


Page 21 of 22
TSB−12−26−001
2011 Lancer Evolution page 26−20

>>B<< WASHER (w/CASTELLATED NUT ONLY)/DRIVESHAFT
NUT INSTALLATION



Insert the attachment from page 22
Page 22 of 22
TSB−12−26−001
Insert the following where indicated on page 26−20.




© dot.report 2024

Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.