DSA-PC-156

SB-10046040-6055
DEALER SERVICE ACTION
Date: June 7, 2012
2013 ALTIMA STEERING COLUMN
Check Service COMM to confirm service action eligibility.
ID #: PC156
APPLIED VEHICLES: 2013 Nissan Altima
INTRODUCTION
Nissan North America is conducting a service action on certain specific 2013
Nissan Altima vehicles identified in Service Comm that are located at dealers and
are currently on “Early Release Consignment Units”. The Service Action will involve
checking the torque on the steering column pinch bolt.
IDENTIFICATION NUMBER
Nissan has assigned identification number PC156 to this service action. This
number must appear on all communications and documentation of any nature
dealing with this service action.
DEALER RESPONSIBILITY
It is the dealer’s responsibility to check Service Comm for the status of each
vehicle falling into the range of this service action that is currently in dealer
inventory. Nissan strongly urges dealers to perform this service action on any
affected vehicles in their inventory before they are retailed.
1/3
SERVICE PROCEDURE
1. Open driver’s door and locate the 12MM steering column pinch bolt.
12MM
pinch bolt.
Do not torque
14MM pinch bolt.
2. Torque 12MM pinch bolt to 18.5 ft-lb (25 NM).
2/3
CLAIMS INFORMATION
Submit claim using the following claims coding:
Work Order Line Type: “CM” Campaign
Campaign: PC156
Claim Type:
PNC:
Symptom:
Diagnosis:
Description:
Torque steering column
pinch bolt.
CM
PC156
ZZ
99
Op Codes
Flat Rate
Time
PC1560
0.2H
3/3
Parts
Required
on claim
No
Expense
Code
Required
No