DI-03072013
Service Bulletin Details
Public Details for: DI-03072013
Nissan: this is to inspect the front seat bolts on dealer inventory. *kb
- 2013 -
Models from 2013
2013 NISSAN LEAF |
SB-10051963-1764 Dealer Inventory Inspection March 7, 2013 2013 Nissan LEAF Front Seat Bolts Subject: 2013 Nissan LEAF Front Seat Bolts Dealer Inventory Inspection Attention: Dealer Principals, Sales, Parts and Service Managers ***** Dealer Inventory Inspection Announcement ***** Nissan is conducting a dealer inventory inspection to inspect the front seat bolts on certain specific 2013 Nissan LEAF vehicles. ***** Vehicle Identification – Dealer Inventory ***** 2013 LEAF vehicles subject to this inspection can be identified through two methods: • SERVICE COMM – Beginning March 8, 2013, dealer service departments can complete an inquiry on SERVICE COMM – I.D. PC219 - to determine an affected vehicle. • VIN List – As a courtesy, posted with this announcement is a list of affected dealer inventory VINs by region, district, and Dealer Code. This VIN list is available on NNAnet.com under My Documents Sales>Campaigns>, Parts>Campaigns>, Service>Campaigns> categories. ***** Dealer Responsibility ***** It is the dealer’s responsibility to check SERVICE COMM – I.D. PC219 – for the status on each vehicle falling within the range of this dealer inventory inspection which is currently in its inventory. Nissan requires dealers to perform this procedure on any vehicles in their inventory before they are retailed. Nissan dealers should perform the inspection only on vehicles specifically identified in SERVICE COMM. Nissan Parts & Service Dealer Support 3/7/13 1/3 Service procedure 1. Move driver’s seat to the most forward position. 2. Locate rear seat bolts. Figure 1 3. Using your hand on the head rest, rock the seat back and forth. 4. Visually inspect both rear seat bolts for a gap or movement at the washer. While rocking seat, visual inspect both rear seat bolts for a gap or movement at washer. Figure 2 5. Slide seat to the most rearward position. 6. Locate front seat bolts. 7. Using hand on head rest, rock seat back and forth. 8. Visually inspect both front seat bolts for a gap or movement at the washer. 9. Repeat process on passengerside front seat. Figure 3 2/3 • If there is no gap and no movement is detected, no further action is needed, file claim using Op Code PC2190. • If there is a gap and or movement is detected, please take a picture and send picture and VIN# to [email protected] for further instructions. CLAIMS INFORMATION Submit claim using the following claims coding: Work Order Line Type: “CM” Campaign Campaign: PC219 Claim Type: PNC: Symptom: Diagnosis: Description: Inspect Driver and Passenger front seat bolts (8). CM PC219 ZZ 99 Op Codes Flat Rate Time PC2190 0.2H 3/3 Parts Required on claim Expense Code Required No No