ITB-13-050

SB-10054093-3865
Classificatio n:
Referen ce:
Date:
EL13-028
ITB13-050
December 5, 2013
2013 JX35;
REMOTES DO NOT WORK 20 MINUTES AFTER LOCKING THE DOORS
APPLIED VEHICLE:
2013 JX35 (L50)
IF YOU CONFIRM:
All functions of an Applied Vehicle’s remotes will not work after the doors have been locked and the BCM goes
into “sleep mode” (about 15-20 minutes).
ALL of the following MUST be verified in the given order:
1. All remote functions do not work after the BCM goes into “sleep mode”.
2. All remote functions will work again after pressing one of the request switches on the vehicle.
3. The issue (all remote functions do not work) repeats after the BCM goes back into “sleep mode” again.
4. Remote signal strength checks OK with Signal Tech II.
ACTION:
1. ALL of the four steps above MUST be verified in the given order for this bulletin to apply.
2. If the issue has been verified as stated above, replace the BCM.
•
For BCM replacement procedure, refer to the M ELECTRICAL & POWER CONTROL > BCS Body
Control System section of the appropriate Electronic Service Manual (ESM).
PARTS INFORMATION
DESCRIPTION
PART NUMBER
QUANTITY
CONTROLLER ASSY - BCM
284B1-3JA1E
1
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
BCM Replace
(1)
RX3UAA
1.0
ZE
32
BCM-Configuration
RX3U1A
0.2
(1) Refer to the electronic parts catalog (FAST) and use the (284B1-XXXXX) as the primary failed part (PFP).
Infiniti Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you
believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti dealer to
determine if this applies to your vehicle.
1/2
Remote
functions
of two
sample
IKeys
2/2
ITB13-050