TIBU-7417
Service Bulletin Details
Public Details for: TIBU-7417
Caterpillar: the afi fuel supply line can rub through from fuel system return line, due to incorrect routing of fuel lines. Can cause regen issues or an inability to perform regens. Model ct660. *pe
Models from 2014
2014 CATERPILLAR CT660 |
Models from 2013
2013 CATERPILLAR CT660 |
Models from 2012
2012 CATERPILLAR CT660 |
2/6/2014 Advanced Full Text Search - TIBU7417 - AFI Fuel Supply Line Rubbing{1274} T echnical Information Bulletin AF I F uel Supply Line Rubbing{1274} Me dia Num be r -TI B U7417-00 Caterpillar: Confidential Y ellow P ublicat ion D at e -02/ 01/ 2014 D at e Updat e d -02/ 01/ 2014 SB-10054882-7890 i05615949 AFI Fuel Supply Line Rubbing{1274} SM CS - 1274 On Highway Truck: CT660 (S/N: TGA1-UP; TGD1-UP; TEJ 1-UP; TRK1-UP; TKL1-UP; TEM 1-UP; TEP1-UP; TGS1-UP; TJ S1-UP; TGT1-UP; TSW1-UP; TSY1-UP; TGZ1-UP) Intr oduction The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below. Pr oblem If the fuel lines are not routed correctly, the AFI Fuel Supply line can rub through from the fuel system return line. This situation can cause regen issues or an inability to perform regens. When the ECM senses a pressure issue in the line, the ECM will stop sending fuel to the AFI from the DSI. You will not see a fuel leak in the area. What you will see is a regen issue and aftertreatment temperatures not reaching the correct temp and eventually the ECM will abort the OBFCT. SYMPTOMS Regen issues Inability to perform regens No fuel to the AFI from the DSI View Image https://sis.cat.com/sisweb/servlet/cat.cis.sis.PController.CSSISTechDocServlet 1/5 2/6/2014 Advanced Full Text Search - TIBU7417 - AFI Fuel Supply Line Rubbing{1274} Illustration 1 g03566558 Example of an AFI Fuel Supply Line rubbing View Image https://sis.cat.com/sisweb/servlet/cat.cis.sis.PController.CSSISTechDocServlet 2/5 2/6/2014 Advanced Full Text Search - TIBU7417 - AFI Fuel Supply Line Rubbing{1274} Illustration 2 g03566560 Example of an AFI Fuel Supply Line rubbing Example of a Bad OBFCT with a Hole in the AFI Fuel Supply Line Notice that the AFT Fuel Doser CTL actuated three times to purge the air. The AFT Fuel Doser CTL went to 0 and AFT Fuel Pressure 2 never climbed off 0 PSI. You will not see any leaks. There is no fuel being sent to pressurize the line. View Image Illustration 3 g03566563 Solution Table 1 https://sis.cat.com/sisweb/servlet/cat.cis.sis.PController.CSSISTechDocServlet 3/5 2/6/2014 Advanced Full Text Search - TIBU7417 - AFI Fuel Supply Line Rubbing{1274} Required Parts Item Qty Part Number Description 1 1 376-2674 Fuel Tube View Image Illustration 4 g03566574 (1) 376-2674 Fuel Tube Inspect and verify that the AFI Fuel Tube (1) is secured to the AFI bracket with the P-Clip. Ensure that the line separator clip is installed on the return and AFI line. Be sure that the DSI supply line is not rubbing anything. Refer to Illustration 4. https://sis.cat.com/sisweb/servlet/cat.cis.sis.PController.CSSISTechDocServlet 4/5 2/6/2014 Advanced Full Text Search - TIBU7417 - AFI Fuel Supply Line Rubbing{1274} View Image Illustration 5 g03566580 Example of a good OBFCT after the AFI Fuel Supply Line was repaired Notice the AFT Fuel Doser CTL actuated and stayed active and AFT Fuel Pressure 2 is working properly now. Refer to Illustration 5. C opyright 1993 - 2014 C ate rpillar Inc. All R ights R e se rve d. Private Ne twork For SIS Lice nse e s. https://sis.cat.com/sisweb/servlet/cat.cis.sis.PController.CSSISTechDocServlet Thu Fe b 06 2014 15:12:27 GMT-0600 (C e ntral Standard Tim e ) 5/5