FSB-375-010
Service Bulletin Details
Public Details for: FSB-375-010
Volvo: vehicle may experience the seat harness being crushed by the seat base. This can cause wiring chaffing or damage. A new routing has been implemented to prevent the failures. Also included make: volvo model: vah no model year provided
- 9999 -
Models from 9999
9999 VOLVO VHD |
9999 VOLVO VN |
Field Service Bulletin Trucks Volvo Trucks North America Greensboro, NC USA Date 3.2014 Group No. Release 375 010 01 Page 1(6) SB-10055304-8451 Seat Harness Routing (Non-Swivel) VN, VHD, VAH FSB 375-010, Seat Harness Routing (Non-Swivel) (March 2014) Vehicles equipped with a driver side non-swivel seat and I shift transmission, built prior to October 20, 2013, may experience the seat harness being crushed by seat base, which may cause wire chaffing/damage. To correct the situation a new routing has been implemented to prevent the above failures. Required Parts Quanity Part Number Description 1 20885496 Double Cable Tie 2 21096682 Cable Tie with Horizontal Edge Clip 1 25375492 Cable Tie with Vertical Edge Clip W3076418 Service personnel: Please circulate, read and initial Service Manager Warranty Administrator PV729-FSB375-010_V Workshop Foreman Service Technicians USA64143 Volvo Trucks North America Field Service Bulletin Date 3.2014 Group No. Release 375 010 01 You must read and understand the precautions and guidelines in Service Information, group 30, "General Safety Practices, Electrical and Electronics" before performing this procedure. If you are not properly trained and certified in this procedure, ask your supervisor for training before you perform it. Repair 1 Secure the vehicle for service by parking it on a flat level surface, applying the parking brake, chocking the rear wheel, and placing the transmission in neutral. 2 Disconnect all cables from the negative (ground) battery terminals to prevent personal injury from electrical shock and prevent damage to electrical components. 3 Disconnect the wiring harness connector at the shifter. W3076414 Page 2(6) Volvo Trucks North America Field Service Bulletin Date 3.2014 Group No. Release 375 010 01 4 Look for chafed wires under seat base. Reuse harness if undamaged. If damaged repair as necessary. W3088546 W3076421 Page 3(6) Volvo Trucks North America Field Service Bulletin Date 3.2014 Group No. Release 375 010 01 5 Flip seat cushion up and loosely install and cable tie the shifter harness along the new path for routing and clipping. W3076417 W3076420 Cable Tie with Horizontal Edge Clip # 21096682, Qty 2 Page 4(6) Volvo Trucks North America Field Service Bulletin Date 3.2014 Group No. Release 375 010 01 6 Secure the shifter harness by cinching all the cable ties until the corrugated loom is lightly snug. W3076419 Cable Tie with Vertical Edge Clip # 25375492, Qty 1 Note: Do not over tighten the cable ties, otherwise the wires and loom will become damaged. Page 5(6) Volvo Trucks North America Field Service Bulletin Date 3.2014 Group No. Release 375 010 01 Page 6(6) 7 Connect the wiring harness connector at the shifter. W3076416 8 Install all the previously removed cables to the negative (ground) battery terminals. Reimbursement This repair may be eligible for reimbursement if a product failure was experienced within time and mileage limits of the applicable Warranty coverage. Reimbursement is obtained via the normal claim handling process. Claim Type (used only when uploading from the Dealer Bus. Sys.) W Labor Code Primary Labor Code 37510–2–00 0.3 hrs. Causal Part 20962710 Volvo Trucks North America engages in a comprehensive program of testing and evaluating to provide the best possible product. Volvo Trucks North America however, is not committed to, or liable for updating existing vehicles.