SIB-36-03-14
Service Bulletin Details
Public Details for: SIB-36-03-14
Bmw: the position of an affected tire is incorrectly displayed, when tire pressure is low, in instrument cluster and control display (cd), due to software error. Model 2011 f 01, 02, 04, 07, 10, 12, 13, 25 (x3). *pe
- 2011 -
Models from 2011
2011 BMW 5 SERIES |
2011 BMW 5-SERIES |
2011 BMW 5-SERIES GRAN TURISMO |
2011 BMW 6 SERIES |
2011 BMW 7-SERIES |
2011 BMW ACTIVEE |
2011 BMW X3 |
Page 1 of 3 SI B36 03 14 Wheels and Tires June 2014 Technical Service SB-10056095-9957 SUBJECT RDC: Incorrect Tire Position Displayed with Air Pressure Drop MODEL F01 (7 Series Sedan) F02 (7 Series Sedan) F04 (ActiveHybrid 7) F07 (5 Series Gran Turismo) F10 (5 Series Sedan) F12 (6 Series Convertible) F13 (6 Series Coupe) F25 (X3) Produced from 8/2011 through 12/2011 SITUATION When there is a low tire pressure warning, in some cases the position of the affected tire may be incorrectly displayed in the instrument cluster and CD (Control Display). CAUSE Software error in the RDC (tire pressure control) module in conjunction with wheel electronics part number 4 078 787 or 4 079 152 CORRECTION Run diagnostics with ISTA/D and work through the corresponding test module. If the test module indicates replacement of the wheel electronics, identify which part number is installed. If P/N 4 078 787 or 4 079 152 is found, replace all four wheel electronics with P/N 36 10 6 856 227. If P/N 4 078 787 or 4 079 152 is NOT found, proceed as instructed by the ISTA test module and replace the indicated sensor. Note: P/N 4 078 787 or 4 079 152 is easily identified by the stars that border the face of the wheel electronics, as seen in the picture to the left. PARTS INFORMATION https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/16267.1.B360314... 7/29/2014 Page 2 of 3 Part Number Description Quantity 36 10 6 856 227 Wheel electronics module 4 WARRANTY INFORMATION Covered under the terms of the BMW New Vehicle/SAV Limited Warranty or the BMW Certified Pre-Owned Program. When P/N 4 078 787 or 4 079 152 are found, replace all four wheel electronics with P/N 36 10 6 856 227. Defect Code: 36 20 01 12 00 Labor Operation: Labor Allowance: Description: 00 00 006 Refer to KSD2 Performing “vehicle test” (with vehicle diagnosis system – checking faults) Refer to KSD2 Connect an approved battery charger/power supply (indicated in KSD2 as “Charging battery”) Work time (WT) Performing vehicle diagnosis – RDC test module Refer to KSD2 Reposition tires on rims for front and rear wheels Refer to KSD2 Removing and installing or replacing one RDC wheel electronic module 3 FRU Work time to replace the other three (3) RDC wheel electronic modules and 61 21 528 and, as necessary 36 11 100 and 36 12 567 and 36 11 535 and 36 99 000 Labor operation code 00 00 006 is a Main labor operation. If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead. Even though work time labor operation code 36 11 100 ends in “100,” it is not considered a Main labor operation. Work time (WT) labor operation 36 11 100 requires an individual punch time. Even though work time labor operation code 36 99 000 ends in “000,” it is not considered a Main labor operation. Also, since the “work time” FRU allowance to be claimed is specified, a separate punch time is not required for work time operation code 36 99 000. Wheel and Tire Balancing with the above work– Wheels Removed https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/16267.1.B360314... 7/29/2014 Page 3 of 3 Labor Operation: Labor Allowance: Description: 36 12 574 Refer to KSD2 Mounting “four tires on rims” and balancing dynamically Refer to KSD2 Mounting “two tires on rims” and balancing dynamically Refer to KSD2 Mounting “one tire on rim” and balancing dynamically or 36 12 572 or 36 12 571 Refer to KSD2 for the corresponding flat rate unit (FRU) allowance. Enter the Chassis Number, which consists of the last 7 digits of the Vehicle Identification Number (VIN). Click on the “Search” button, and then enter the applicable flat rate labor operation in the FR code field. Other Repairs If performing ISTA diagnostics and related test plans results in other eligible and covered work, claim this work with the applicable defect code and/or labor operations listed in KSD2. [ Copyright ©2014 BMW of North America, Inc. ] https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/16267.1.B360314... 7/29/2014