PIP-5276-E
Service Bulletin Details
Public Details for: PIP-5276-E
Cadillac/chevrolet/gmc: on some vehicles and/or trucks, instrument cluster will illuminate, after an oil change, indicating low oil pressure and/or ses lamp will illuminate. Model 2007-13 canyon, sierra, savana, yukon, cts-v, escalade, av
- 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 -
Models from 2013
Models from 2012
Models from 2011
Models from 2010
Models from 2009
Models from 2008
Models from 2007
SB-10059078-4342 Service Bulletin File in Section: Bulletin No.: Date: PIP5276E August, 2015 PRELIMINARY INFORMATION Subject: SES Lamp P0521 Setting After An Oil Change And Or Low Oil Pressure Indicated On The Instrument Panel Models: 2007-2013 Cadillac CTS-V, Escalade 2007-2013 Chevrolet Avalanche, Camaro SS, Colorado, Corvette, Express, Silverado, Suburban, Tahoe 2007-2013 GMC Canyon, Sierra, Savana, Yukon with a V8 Engine (RPOs L20, L77, L94, L96, L99, L9H, LC8, LC9, LH9, LMF, LMG, LY6, LZ1) This PI was superseded to update Recommendation/Instructions. Please discard PIP5276D. Condition/Concern Some customers may complain of a SES light or low oil pressure indicated on the instrument panel cluster with DTC P0521 stored. In some cases, this may have started shorting after an oil change. Recommendation/Instructions If you are working on a Gen4 V8 that is setting a DTC P0521 and/or has low oil pressure indicated on the instrument panel in cold or hot weather and the engine is currently equipped with a PF48E oil filter, determine if the engine has been properly repaired and cleaned following the procedure used in the latest version of bulletin 10-06-01-008. If not, please update the engine with the components outlined in the bulletin. If it has been properly repaired and cleaned, inspect the left rocker cover (square baffle) and verify that the baffles can hold water and do not leak. If any leaks are found, clean seal the edge of the baffle with RTV if possible or replace the valve cover. Thoroughly clean and dry the valve cover before installation and/or resealing. Change the engine oil and replace the oil filter using a PF48e type filter. Parts Information Refer to the electronic parts catalog and/or latest version of 10-06-01-008 for the appropriate part numbers. Warranty Information The correction for this concern may be one of several repairs described above. For vehicles repaired under warranty, please use the appropriate warranty labor operation based on the actual cause and repair.