14-01-062
Service Bulletin Details
Public Details for: 14-01-062
Summary to be provided on a future date.
Models from 2015
2015 HYUNDAI EQUUS |
Models from 2014
2014 HYUNDAI EQUUS |
GROUP Hyun DR 11 NUMBER nEWTHlnKlnG. CAMPAIGN 14-01-062 nEW POSSIBILITIES. ~---------1--------_, Technical Service Bulletin SUBJECT: DATE DECEMBER 2014 MODEL(S) Eauus (VI) REAR CENTER CONSOLE ARMREST LID REPLACEMENT (SERVICE CAMPAIGN TW2) *****DEALER STOCK ONLY***** Dealers must perform this Service Campaign on all affected vehicles prior to customer retail delivery. When a vehicle arrives at the Service Department, access Hyundai Motor Ame rica's "Warranty Vehicle Information" screen via WEBDCS to identify open Campaigns . Description: On certain 2014MY- 201 SMY Equus (VI) vehicles , the hinge on the rear center console armrest may split. This bulletin describes the procedu re to replace the rear center console armrest lid . !Applicable Vehicles: Certain 2014-2015 Equus (VI) Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service Advisors , Technicians , Body Shop Manager, Fleet Repair SUBJECT: REAR CENTER CONSOLE ARMREST LID REPLACEMENT Parts Information: Part Name Part Number Qty. Lid CoverRR Armrest 1 899203NOOOQQH Tie Wrap • + 2 Warranty Information: NOTE: Submit Claim on Campaign Claim Entry Screen TSB # : 14-01-062 Page 2 of 11 SUBJECT: REAR CENTER CONSOLE ARMREST LID REPLACEMENT Service Procedure 1 Remove negative battery terminal from battery. 2. Remove the rear seat cushion (A) on both sides . 3. Separate the rear seat back (B) from the body on both sides to secure the work space to remove the rear seat armrest. For information regarding removal of the seat cushion and back, please refer to the applicable workshop manual. TSB #: 14-01 -062 Page 3 of 11 SUBJECT: REAR CENTER CONSOLE ARMREST LID REPLACEMENT 4. Disconnect the connectors (C , D). 5. Remove the armrest mounting bolts (E) and nut (F) on both sides and then remove the armrest (G) . Place a clean cloth underneath armrest console to protect leather in case surroundings are dirty. Tightening Torque: 14.5 - 18.1 lbft (19.6 - 24.5 Nm, 2.0 - 2.5 kgf.m) TSB # : 14-01-062 Page 4 of 11 I SUBJECT: REAR CENTER CONSOLE ARMREST LID REPLACEMENT 6. Remove the screw located at the white rectangle area and then remove the hinge cover (H) . 7. Remove the armrest board mounting nut (I). Tightening Torque: 7.2 - 8.7 lb-ft (9.8 - 11.8 Nm, 1.0 - 1.2 kgf.m) 8. Remove the armrest frame (J) mounting bolts (white rectangle) and then remove the clips (white arrow) Tightening Torque: 3.6 - 4.3 lb-ft (4.9-5.9 Nm, 0.5 - 0.6 kgf.m) TSB # : 14-01-062 Page 5 of 11 SUBJECT: REAR CENTER CONSOLE ARMREST LID REPLACEMENT 9. Separate the armrest board (K) and the box (L). 10. Cut both zip ties (white box) When reinstalling, do not forget to install new ties at the same position. Failure to do so will cause lid to not open properly. TSB #: 14-01-062 Page 6 of 11 SUBJECT: REAR CENTER CONSOLE ARMREST LID REPLACEMENT 11 . Remove the screws. 12. Remove the screws and then disconnect the ~~~if~~-----r~=,?1;~ connectors . TSB #: 14-01 -062 Page 7 of 11 SUBJECT: 13 . REAR CENTER CONSOLE ARMREST LID REPLACEMENT Separate the armrest bezel (M) from the armest box (N). A CAUTION 1.) To remove the armrest bezel , insert plastic trim tool (0). See photo to the right. 2.) Be careful not to damage the armrest bezel and box. 3.) Use shop towel underneath trim tool for added protection TSB # : 14-01-062 Page 8 of 11 SUBJECT: REAR CENTER CONSOLE ARMREST LID REPLACEMENT 14. Pull the hinge pin (P) to remove it and then remove the spring (Q) . Repeat on both sides . 15. Remove armrest lid. TSB # : 14-01-062 Page 9 of 11 REAR CENTER CONSOLE ARMREST LID REPLACEMENT SUBJECT: 16. Remove the 3 screws (R) and then remove the armrest lid cover (S). l A CAUTION Be careful to not damage leather when removing lid cover. NOTICE 1.) Reuse the removed armrest lid cover assembly (T). 2.) Confirm if any clips are broken or damaged. TSB # : 14-01-062 Page 1Oof11 SUBJECT: REAR CENTER CONSOLE ARMREST LID REPLACEMENT 17 . Install the new rear armrest lid cover.(U) 18 . Reinstall all the removed parts in reverse order of removal. Verify operation of all disturbed components . 19. Test operation of console lid by opening and closing it. Also , test rear seat entertainment controls for proper operation . TSB #: 14-01-062 Page 11 of 11