T-SB-0022-13
Service Bulletin Details
Public Details for: T-SB-0022-13
Summary to be provided on a future date.
- 2014 -
Models from 2014
@TOYOTA Technical Service Bulletin February 8, 2013 T-SB-0022-13 Tire Positioning Before New Vehicle Delivery Service Category General Section Pre-Delivery Service Market Toyota Supports ~ ASE Certification¥ USA Applicability YEAR(S) MODEL(S) 2014 4Runner, Avalon, Avalon HV, Camry, Camry HV, Corolla, FJ Cruiser, Highlander, Highlander HV, Land Cruiser, Prius, Prius C, Prius PHV, Prius V, RAV4, Sequoia, Sienna, Tacoma, Tundra, Venza, Yaris ADDITIONAL INFORMATION Introduction During the manufacturing process tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Please refer to the following procedure to ensure that the original tires stay in the same location on the vehicle. Warranty Information OP CODE DESCRIPTION TIME OFP T1 T2 N/A Not Applicable to Warranty - - - - © 2013 Toyota Motor Sales, USA Page 1 of 2 @TOYOTA T-SB-0022-13 February 8, 2013 Page 2 of 2 Tire Positioning Before New Vehicle Delivery Installation Procedure 1. Mark the tire installation position on the inward facing tire sidewall. Example: Front Right = FR, Front Left= FL, Rear Right = RR, Rear Left = RL 2. Install the original tires on the new or refinished wheels with the marked side facing inwards. 3. Balance tire/wheel assemblies on the vehicle in the marked positions. 4. Place the tire/wheel assemblies on the vehicle in the marked positions. NOTE Torque the wheel nuts to the proper torque value in sequence. © 2013 Toyota Motor Sales, USA