PIT4534D
Service Bulletin Details
Public Details for: PIT4534D
Summary to be provided on a future date.
- 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 -
Models from 2014
2014 BUICK ENCLAVE |
2014 GMC ACADIA |
Models from 2013
2013 BUICK ENCLAVE |
2013 GMC ACADIA |
Models from 2012
2012 BUICK ENCLAVE |
2012 GMC ACADIA |
Models from 2011
2011 BUICK ENCLAVE |
2011 GMC ACADIA |
Models from 2010
2010 BUICK ENCLAVE |
2010 GMC ACADIA |
2010 SATURN OUTLOOK |
Models from 2009
2009 BUICK ENCLAVE |
2009 GMC ACADIA |
2009 SATURN OUTLOOK |
Models from 2008
2008 BUICK ENCLAVE |
2008 GMC ACADIA |
2008 SATURN OUTLOOK |
Models from 2007
2007 GMC ACADIA |
2007 SATURN OUTLOOK |
File in Section: Service Bulletin Bulletin No.: Date: PIT4534D April, 2013 PRELIMINARY INFORMATION Subject: Diagnostic Tip - Driver Information Center (DIC) Switch Buttons Are Inoperative Models: 2008 - 2014 Buick Enclave 2007 - 2014 GMC Acadia 2007 - 2010 Saturn Outlook This PI was superseded to update model years. Please discard PIT4534C. The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI. Condition/Concern The driver information center (DIC) switch buttons are inoperative after the following service procedures: • Replacing the DIC switch. • Replacing the instrument panel cluster (IPC). • Disconnecting the DIC switch during a service procedure. • Disconnecting the IPC during a service procedure. This occurs because the IPC needs to see the presence of the DIC switch at the time of battery power connect to the IPC. If the IPC does not detect the DIC switch at power up, the switch will be inoperative. To prevent this condition, always remove battery power to the IPC after service is performed to either the DIC switch or the IPC. Recommendation/Instructions Make sure that all of the connectors to the IPC and the DIC switch are connected and then remove the IPC/DSPLY fuse. Reinstall the fuse after a few seconds to return the function of the DIC switch to normal. Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.