23-023-13
Service Bulletin Details
Public Details for: 23-023-13
Summary to be provided on a future date.
Models from 2013
2013 FIAT 500 |
Models from 2012
2012 FIAT 500 |
.. NUMBER: GROUP: DA TE: 23-023-13 Body June 29, 2013 This bulletin is supplied as technical information only and is not ari authorization for repair. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of Chrysler Group LLC. THIS SERVICE BULLETIN IS ALSO BEING RELEASED AS RAPID RESPONSE TRANSMITTAL (RRT) 13-044. ALL APPLICABLE SOLD AND UN-SOLD RRT VIN's HAVE BEEN LOADED. TO VERIFY THAT THIS RRT SERVICE ACTION IS APPLICABLE TO THE VEHICLE, USE VIP OR PERFORM A VIN SEARCH IN TECHCONNECT. ALL REPAIRS ARE REIMBURSABLE WITHIN THE PROVISIONS OF WARRANTY. SUBJECT: Front And/Or Rear Emblems Bubbling And/Or Fading OVERVIEW: This bull etin involves replacing the rear FIAT emblem and inspecting and if necessary replacing th e front FIAT emblem. MODELS: (FF) 2012-201 3 500 NOTE: This bulletin applies to vehicles built before January 25, 2013 (MDH0125XX). SYMPTOM/CONDITION: Front And/Or Rear Emblems Bubbling And/Or Fading DIAGNOSIS: If a customer's VIN is listed in VIP or your RRT VIN list, perform the repair. For all other customers that describe the symptom/condition, perform the Repair Procedure. PARTS REQUIRED: Qty. Part No. Description 1 (AR) 68085442AB Nameplate Liftgate, Fiat 1 (AR) 68073863AB Nameplate Fascia, Fiat (AR) NPN lsopropyl Alcohol (AR) NPN 3M-08984 General Purpose Adhesive Cleaner QT (946.2ml) And/Or Equivalent NOTE: One QT (946.2ml) of 3M-08984 General Purpose Adhesive Cleaner will service 32 vehicles. 23-023-13 -2- REPAIR PROCEDURE: 1. Inspect the front fascia and emblem as shown in (Fig. 1). Were there bubbles and/or fading on the emblem? a. Yes>>> Proceed to step Step #2. b. No>>> Remove and discard rear liftgate emblem using a trim stick and proceed to Step #3. Fig. 1 FIAT Emblem 1 - Fading and bubbling 2 - Fiat emblem 2. 3. Remove the front fascia and liftgate emblem using trim stick and discard. Remove adhesive residue from front fascia and/or liftgate where the emblem(s) have been removed with 3M 08984 general purpose adhesive cleaner or equivalent in conjunction with a lint free towel. 4. Clean the surface area where the emblem will be installed with isopropyl alcohol and a lint free towel. 5. Remove the adhesive liner from the new emblem(s) and install the emblem(s). NOTE: Apply firm pressure to the emblem to ensure the adhesive is properly wetted out. 6. Return the vehicle to the customer or dealer inventory. POLICY: Reimbursable within the provisions of the warranty. TIME ALLOWANCE: Labor Operation No: 23-03-08-92 Description Inspect the front fascia emblem and replace the Amount 0.2 Hrs. .. ' , -3- 23-023-13 rear liftgate Fiat emblem only (0 - Introduction) 23-03-08-93 Inspect and replace the front fascia and rear liftgate Fiat emblem only (0 - Introduction) FAILURE CODE: lzz IService Action 0.3 Hrs.