2033517/2
Service Bulletin Details
Public Details for: 2033517/2
Summary to be provided on a future date.
- 2014 - 2013 - 2012 - 2011 - 2010 - 2009 -
Models from 2014
| 2014 AUDI Q5 |
| 2014 AUDI Q7 |
Models from 2013
| 2013 AUDI Q5 |
| 2013 AUDI Q7 |
Models from 2012
| 2012 AUDI Q5 |
| 2012 AUDI Q7 |
Models from 2011
| 2011 AUDI Q5 |
| 2011 AUDI Q7 |
Models from 2010
| 2010 AUDI Q5 |
| 2010 AUDI Q7 |
Models from 2009
| 2009 AUDI Q5 |
Technical Service Bulletin 66 Wind noise from exterior rear view mirror housing at turn signal seam 66 13 33 2033517/2 September 30, 2013. Supersedes Technical Service Bulletin Group 66 number 13-27 dated April 8, 2013 for reasons listed below. Model(s) Year VIN Range Q5 2009 - 2013 000001 - 999999 Q5 2014 000001 - 009821 Q7 2010 - 2013 000001 - 999999 Q7 2014 000001 - 009004 Vehicle-Specific Equipment Not Applicable Condition REVISION HISTORY Revision Date Purpose 2 - Revised header data (added VIN breaks, added model) 1 4/8/2013 Initial publication Wind noise is heard by the customer at highway speeds. Technical Background Air flows through the exterior rear view mirror housing at the seam where the turn signal lamp meets the housing. This causes a high-frequency whistling tone. Production Solution Not applicable. © 2013 Audi of America, Inc. Page 1 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Service 1. Confirm through diagnosis and road tests that the source of the wind noise is coming from the exterior rear view mirror housing, specifically at the area of the housing where the turn signal lamp is mounted (Figure 1). Figure 1. Application of tape over turn signal lamp. Tip: If the noise is not coming from the turn signal lamp seam, see TSB 2029586, 66 Wind noise from exterior rear view mirror base or at lane change assist lamp. 2. Should the root cause of the wind noise be from the seams at the turn signal lamp, remove the turn signal lamp from the mirror housing starting with the removal of the mirror housing from the mirror base (Figure 2). Figure 2. Removal of the mirror housing from the mirror base. 3. Remove the turn signal lamp from the mirror housing (Figure 3). Figure 3. Removal of the turn signal lamp from the mirror housing. © 2013 Audi of America, Inc. Page 2 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin 4. Insert strips of sealing foam tape 8F0857869 into the channel that surrounds the turn signal lamp (Figure 4). Figure 4. Sealing foam tape. 5. Leave no gaps around the perimeter of the turn signal lamp channel (Figures 5 and 6). Figure 5. Turn signal lamp with sealing foam tape installed. Figure 6. Turn signal lamp with sealing foam tape installed. 6. Exercise care when reassembling the turn signal lamp and side view mirror housing. Incorrect assembly will lead to additional gaps where wind noise can occur. © 2013 Audi of America, Inc. Page 3 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Service Bulletin Note: Perform this modification to both outer mirrors even if the wind noise is produced by only one outer side view mirror. Warranty Claim Type: Use applicable claim type. If vehicle is outside any warranty, this Technical Service Bulletin is informational only. Service Number: 6655 Damage Code: 0051 Labor Operations: Side turn signals – both sides - remove and reinstall Diagnostic Time: 9453 2000 40 TU Side turn signal lamps – both sides - apply sealing 6655 9999 foam tape 50 TU GFF No allowance 0 TU Road test prior to service procedure 0121 0002 10 TU Road test after service procedure 0121 0004 10 TU Technical diagnosis at dealer’s discretion (Refer to Section 2.2.1.2 and Audi Warranty Online for DADP allowance details) Claim Comment: As per TSB #2033517/2 All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review or audit by Audi Warranty. Required Parts and Tools Part Number Part Description Quantity 8F0857869 Sealing foam tape 10 Additional Information All parts and service references provided in this TSB (2033517) are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information. © 2013 Audi of America, Inc. Page 4 of 4 All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.