2030688

Technical Bulletin
Model(s)
Year
Routan
2012
Eng. Code
Trans. Code
VIN Range From
VIN Range To
All
All
All
3.6L
(CJRA)
Condition
01 13 08 March 5, 2013 2030688
MIL ON DTC P0108 Manifold Absolute Pressure Sensor Circuit High Stored in ECM Fault Memory
DTC
P0108
Description
Manifold Absolute Pressure Sensor Circuit High
Note:
This bulletin applies to vehicles equipped with a 3.6L engine built before June 25, 2012.
Technical Background
SYMPTOM/CONDITION:
• The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the
Technician may find that P0108 - Manifold Absolute Pressure Sensor Circuit High has been set active or
stored.
• Update programming of the Powertrain Control Module (PCM) with improved software to correct Diagnostic
Trouble Code (DTC) P0108.
Tip:
• StarMOBILE™ UPDATE PROGRAMMING FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE
INTERNET.
• StarMOBILE SOFTWARE LEVEL MUST BE AT RELEASE 10.01 OR HIGHER FOR THIS BULLETIN.
• StarMOBILE STANDALONE MODE OR StarMOBILE DESKTOP CLIENT MAY ALSO BE USED TO PERFORM
THIS PROCEDURE.
Page 1 of 4
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Production Solution
Improved PCM software has been introduced in production as of June 25, 2012.
Service
Update programming of the Powertrain Control Module (PCM) with new software.
• Using a StarMOBILE™ with ElsaWeb and the appropriate Diagnostic Procedures, verify all engine systems are
functioning as designed. If DTC's are present, record them on the repair order and repair as necessary before
proceeding with this bulletin. If the customer describes the Symptom/Condition, or it can be reproduced,
perform the Repair Procedure.
Note:
On some vehicles there are two
updates available.
If there are two updates available, as
shown on this screen (left), ONLY
the 68070462AH software should be
selected and installed.
Installing the wrong software update into the PCM will change the driving characteristics of the vehicle
and can result in a customer complaint.
Selecting the wrong installation of the software is irreversible and will not be covered under warranty.
REPAIR PROCEDURE
Note:
Install a battery charger to ensure battery voltage does not drop below 13.2 volts. Do not allow the charging
voltage to climb above 13.5 volts during the programming process.
If this flash process is interrupted / aborted, the flash should be restarted.
• Reprogram the Powertrain Control Module using the StarMOBILE with the latest software.
Page 2 of 4
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
After PCM reprogramming
• Clear the Variable Line Pressure (VLP) Counters, found in the Misc. Function menu for the PCM / ECU.
• Perform the Quick Learn function, found in the Misc. Function menu for the PCM / ECU.
• Clear any DTC's that may have been set in other modules due to reprogramming.
Warranty
Note:
All Routan pre and post road test and StarMOBILE time units are included in the labor operation. Therefore, no
road test or Star MOBILE time units will appear in the designated area within the warranty table.
To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
1)
Procedures Manual
Model(s)
Year(s)
Eng. Code(s)
Trans. Code(s)
VIN Range From
VIN Range To
Routan
2012
3.6L
All
All
All
SAGA Coding
Claim Type:
Use applicable Claim Type
Service Number:
2470
Damage
HST
Damage Location (Depends
on Service No.)
CWM2030688
Use applicable when
indicated in ElsaWeb (L/R)
Code
0039
Parts Manufacturer
Routan
3)
USM
Labor Operation : Program Powertrain
Control Module
24702599 = 40 TU
Causal Part: Select Labor Operation
24702599
Diagnostic Time
GFF Time expenditure
01500000 = 00 TU max.
Road Test
01210002
1)
2)
4)
NO
NO
01210004
Page 3 of 4
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.
Technical Bulletin
Technical Diagnosis
01320000 = 00 TU max.
NO
Claim Comment: Input “As per Technical Bulletin 2030688” in comment section of Warranty Claim.
1)
Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only
2)
Code per warranty vendor code policy.
3)
Labor Time Units (TUs) are subject to change with ELSA updates.
4)
Documentation required per Warranty Policies and Procedures Manual.
Required Parts and Tools
Tool Description
Tool No:
Midtronics Battery Tester/Charger
InCharge 940 (INC 940)
StarMOBILE Tester Kit
CH9401
(Software level 10.04.15 or higher)
Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.
Page 4 of 4
© 2013 Volkswagen Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice.
No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or
otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher.