2027780/2
Service Bulletin Details
Public Details for: 2027780/2
Summary to be provided on a future date.
Models from 2012
2012 VOLKSWAGEN TOUAREG |
Models from 2011
2011 VOLKSWAGEN TOUAREG |
Technical Bulletin Model(s) Year Touareg 2011-2012 Eng. Code Trans. Code VIN Range From VIN Range To 3.6L 8 Speed Automatic / AL1000 All All (CGRA) Condition 01 13 09 March 11, 2013 2027780/2 Supersedes Technical Bulletin V011113 dated October 21, 2011 due to additional model year applicability. Update Programming to Eliminate Cold Start - Rough Idle Concern Note: DO NOT diagnose or replace components due to cold start rough idle concerns before performing the update function as explained in this bulletin. Technical Background Customers may complain of a rough running condition that occurs during cold start. DO NOT replace any parts for this condition. This condition as described does not affect vehicle performance or operation. Production Solution Improved software Service Update-Programming Procedure: Tip: To Update-Programming using SVM, review and follow instructions in Technical Bulletin Instance 2014603 “Software Version Management”. The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim. Page 1 of 4 plus attachment © 2013 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Note: Prior to launching VAS-PC application and starting control module update process, confirm tester screen saver and power settings in accordance with Special Tools and Equipment - Service Information Circular # VSE-08-18. Failure to do so may result in the tester entering power save mode during data transfer, and subsequent control module failure. When using a VAS 6150/5051B or VAS 5052A tester in conjunction with a VAS 5054A wireless transmitter head for a flash procedure, please connect a USB cable between the transmitter head and the tester. Failure to do so may lead to errors during the flash procedure. • Update the Engine Control Module using the SVM Unit code as listed in the table below: Model Engine 2011 Touareg 3.6L 2012 Touareg (CGRA) 3.6L (CGRA) Old Software Part No. Old Software Version New Software Part No. New Software Version (or higher) 03H906023B 8643, 7992, 7584, 6797, 6531 03H906023B 8688 35F4 03H906023AG 2087, 1324, 1000 03H906023AG 2580 36CE SVM Unit Code The procedure can be found in GFF under Functions/ Component Selection, Software Version Management, Adapting Software. WARNING: Radiator Fan(s) may cycle ON high speed during the Update Process! There is a risk that personal injury may result if contact is made with spinning fan blades. Keep hands and all objects away from Radiator Fan(s) during Update Process! Page 2 of 4 plus attachment © 2013 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Tip: The SVM Process must be completed in its entirety so the database receives the update confirmation response. A warranty claim may not be reimbursed if there is no confirmation response to support the claim or action is carried out that is not explicitly stated in the Technical Bulletin. Ensure attached ECM/TCM Tuning Form has been completed and signed by customer as required in SVM Technical Bulletin Instance 2014603 Warranty To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and 1) Procedures Manual Model(s) Year(s) Eng. Code(s) Touareg 2011-2012 3.6L (CGRA) Trans. Code(s) VIN Range From VIN Range To All All All SAGA Coding Claim Type: Use applicable Claim Type Service Number: 1) Damage Code 2470 HST Damage Location (Depends on Service No.) -- Use applicable when indicated in ElsaWeb (L/R) 0039 Parts Manufacturer Touareg WWO Labor Operation : Charge Battery 3) 27068950 = 10 TU 3) 24702599 = 40 TU Labor Operation : Update Programming Diagnostic Time 2) 4) GFF Time expenditure 01500000 = 00 TU max. NO Road Test 01210002 01210004 NO Technical Diagnosis 0132xxxx = 00 TU max. NO Page 3 of 4 plus attachment © 2013 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. Technical Bulletin Claim Comment: Input “As per Technical Bulletin 2027780” in comment section of Warranty Claim. 1) Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only 2) Code per warranty vendor code policy. 3) Labor Time Units (TUs) are subject to change with ELSA updates. 4) Documentation required per Warranty Policy Procedures Manual. Required Parts and Tools No Special Parts required. Tool Description Tool No: Midtronics Battery Tester/Charger InCharge 940 (INC-940) VAS Diagnostic Tool VAS-PC, 5051B, 5052A, 6150X (Base CD V19.01.00 and Brand DVD V19.19.00 or higher) Additional Information All part and service references provided in this Technical Bulletin are subject to change and/or removal. Always check with your Parts Dept. and Repair Manuals for the latest information. Page 4 of 4 plus attachment © 2013 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the publisher. OWNER INFORMATION ABOUT CONTROL MODULE TUNING* ACKNOWLEDGEMENT AND AUTHORIZATION FOR REPROGRAMMING (REFLASHING) OF CONTROL MODULE(S) *) “TUNING” is described as the addition of or modification of any component which causes a Volkswagen vehicle to perform outside the normal parameters and specifications approved by Volkswagen Group of America / Volkswagen Group Canada. Date: Dealer Number: Vehicle Identification Number: Repair Order Number: Dealer stamp I , owner or driver of the above identified Volkswagen, confirm: - “Tuning” as described above (especially power increasing modifications) has NOT been performed on my vehicle. - “Tuning” as described above has been performed on my vehicle and the following components were modified or installed: TUNING was performed by (Please provide Company name and telephone number, if you wish us to contact them): I understand that if my Control Module is determined to have been tuned, any damage caused by the tuning of the Control Module (including adverse emissions consequences) will not be covered by VWGoA / VGC warranties. I am permitting an authorized Volkswagen Dealer to reflash (update) my Control Module, and by doing so, I understand that this process will automatically overwrite (destroy) and permanently delete any tuning program that was previously installed on the Control Module of my Volkswagen vehicle. By signing below, I fully acknowledge and understand that the tuning program will not be restored and VWGoA / VGC, will not be liable in any way for the loss of tuning data. Signature of Customer E 2013 Volkswagen Group of America Inc. All rights reserved. Information contained in this document is based on the latest information available at the time of printi ng and is subject to the copyright and other intellectual property rights of VGoA / VGCA Inc., its affiliated companies and its licensors. All rights are reserved to ma ke changes at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitte d in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or rep osted to other sites, without the prior expressed written permission of the publisher .