PIT5139C
Service Bulletin Details
Public Details for: PIT5139C
Summary to be provided on a future date.
- 2016 - 2015 - 2014 - 2013 - 2012 - 2011 - 2010 - 2009 - 2008 - 2007 -
Models from 2016
2016 BUICK ENCLAVE |
2016 CHEVROLET TRAVERSE |
2016 GMC ACADIA |
Models from 2015
2015 BUICK ENCLAVE |
2015 CHEVROLET TRAVERSE |
2015 GMC ACADIA |
Models from 2014
2014 BUICK ENCLAVE |
2014 CHEVROLET TRAVERSE |
2014 GMC ACADIA |
Models from 2013
2013 BUICK ENCLAVE |
2013 CHEVROLET TRAVERSE |
2013 GMC ACADIA |
Models from 2012
2012 BUICK ENCLAVE |
2012 CHEVROLET TRAVERSE |
2012 GMC ACADIA |
Models from 2011
2011 BUICK ENCLAVE |
2011 CHEVROLET TRAVERSE |
2011 GMC ACADIA |
Models from 2008
2008 BUICK ENCLAVE |
2008 GMC ACADIA |
2008 SATURN OUTLOOK |
Models from 2007
2007 GMC ACADIA |
2007 SATURN OUTLOOK |
File in Section: Service Bulletin Bulletin No.: Date: PIT5139C September, 2015 PRELIMINARY INFORMATION Subject: Diagnosing Suspension And Rear End Sway Models: 2008-2016 Buick Enclave 2009-2016 Chevrolet Traverse 2007-2016 GMC Acadia 2007-2010 Saturn Outlook This PI was superseded to update model years. Please discard PIT5139B. The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI. Condition/Concern Some owners may comment while switching lanes at highway speeds there is a slight rear end sway feel. They could say it feels like driving in a cross-wind. Recommendation/Instructions Follow SI document for Symptoms - Suspension General Diagnosis. Follow SI document for Body Leans or Sways in Corners. Inspect the rear suspension components for signs of damage or looseness. Inspect the rear toe adjustment bar bushings with the suspension loaded (see picture below). Use a pry bar and apply forward and rearward pressure to the bushings at the spindle end. Also test at the frame end. 4259941 Warranty Information The correction for this concern may be one of several repairs described above. For vehicles repaired under warranty, please use the appropriate warranty labor operation based on the actual cause and repair. Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.