PIP5407
Service Bulletin Details
Public Details for: PIP5407
This preliminary information communication provides information to the technician on how to diagnose and repair vehicles that may have diagnostic trouble code P06DD or no or low oil pressure. Technician will replace timing chain tensioner g
Models from 2016
| 2016 CADILLAC CTS-V |
| 2016 CADILLAC ESCALADE |
| 2016 CHEVROLET CAMARO |
| 2016 CHEVROLET CORVETTE |
| 2016 CHEVROLET SILVERADO 1500 |
| 2016 CHEVROLET SUBURBAN |
| 2016 CHEVROLET TAHOE |
| 2016 GMC SIERRA 1500 |
| 2016 GMC YUKON |
Models from 2015
| 2015 CADILLAC ESCALADE |
| 2015 CHEVROLET CORVETTE |
| 2015 CHEVROLET SILVERADO 1500 |
| 2015 CHEVROLET SUBURBAN |
| 2015 CHEVROLET TAHOE |
| 2015 GMC SIERRA 1500 |
| 2015 GMC YUKON |
Bulletin No.: PIP5407 Date: Jun-2016 Service Bullet,in PRELIMINARY INFORMATI0 N 1 Subject: Code P06DD No Or Low Oil Pressure Models: 2016 Cadillac CTS-V 2015-2016 Cadillac Escalade 2016 Chevrolet Camaro 2014-2016 Chevrolet Corvette 2014-2016 Chevrolet Silverado 2015-2016 Chevrolet Suburban, Tahoe 2014-2016 GMC Sierra 2015-2016 GMC Yukon XL Built with RPO's 4.3L 5.3L 6.2L L83 L86 LT1 LT4 LV3 The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this Pl. Condition/Concern Vehicle setting code P06DD, no or low oil pressure, oil control valve may be stuck off commanding high oil pressures (95 psi) and or oil pump face may be damaged. Recommendation/Instructions Tensioner spring in timing chain guide may be "short" not fully seating into guide pivot end. Cycling Oil Pump Control Valve will not cause changes in oil pump response. 1) Short spring not reaching the pivot. Replace timing chain tensioner guide. If oil pump face is damaged and or worn thru replace oil pump. Inspect bearings for damage wear due to debris from oil pump. Warranty Information For vehicles repaired under warranty use: Labor Operation Description Labor Time 4064230 Camshaft Timing Chain Replacement Use Published Labor Time Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed. GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles , or to provide information that could assist in the proper service of a vehicle . Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described , DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition . See your GM dealer for information on whether your vehicle may benefit from the information . • WE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION 2